I need to find parts for my kenmore mixer model 238,69253

First try adjusting it. The head may be set so low, the head can't latch. Does it latch with no whisk attachment? The video shows how to adjust it with the whisk in place using a dime..

If that isn't the reason, spares are available and dealer service is available.

https://www.google.com/search?q=cuisinart+5.5+stand+mixer+parts

..

Hello, Gary -

From what I have found about the Oreck MKT800 Vertical 5 Speed Hand Mixer, there is no "mixer blade" attachment for the appliance. The attachments for the mixer are:
- 2 beaters
- 2 whisks
- 2 dough hooks

You can see an image of the hand mixer with all 6 attachments here:
http://www.qvc.com/Oreck-Vertical-5-Speed-Hand-Mixer-with-Attachments.product.K6135.html

If you mean a replacement beater, whisk, or dough hook for your Oreck MKT800, so far, I have not found a source for those replacements.

Best wishes.

You will need to contact the maker of the appliance. We have no parts books here. Sorry

Here's one at a good price. Also, Sears can order them if you'd prefer that route.

I took a small crowbar, and put the curved end up inside the whisk, and hammered the other end lightly. After about 20 taps, the peg was lined up with the sideways opening so I could twist it off. When I got it off, it looked like there was either flour inside the part where the whisk attaches, or some light corrosion was going on. Either way, I'm going to put a little grease in there so it doesn't happen again.

does anyone know how I could get the whisk beaters for a Kenwood A375? Was given mixer but no whisks!!

It sounds like the attachments aren't aligning correctly. I had the same problem with a Kitchen Aid. The unit should be replaced as soon as possible so you don't end up paying for repairs.

Given the age of a 3-C stand mixer, finding additional parts for it will be exceedingly difficult. The best recommendation is through E-Bay or antiques stores - a specialty dealer. Kitchenaid parts distributors will no longer have anything in inventory for the 3-C mixer.

need beaters for blck & decker mx230 hand mixer