Question about Samsung DLP HL-P5663W 56" TV

1 Answer

Samsung DLP HL-R5667W, seeing little boxes of static flashing

Regardless of input source, picture looks fine except these small boxes of static that flash.

Posted by on

  • welch_jp Jan 13, 2009

    I think you're asking about my experience repairing electronics, if yes, I've been working as an electrical engineer for a fair number of years...okay decades and have everything from an o-scope to a soldering station in my basement, but never have had to repair a DLP before. Thanks for your quick response. Jeff

  • Daniel Conklin
    Daniel Conklin May 11, 2010

    Let me know any experience with big TV repair to proceed further?.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 240 Answers

Samsung color weel replacments are all the new air bearing type insted of fluid type. if you replace the new color weel , color will look bad. also note when ordering your replacment make shure it comes from samsung and not just a generic model.
the original replacement will come with a set of instroction to reset the dmv ajustments.
find the dmd pcb and look for a2 jumper that is visable through a small squaire remove the jumper. then folow instrustions with new color weel.
hope this helps.
regards,
daniel.

Posted on Jan 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung hl-r5667w DLP no picture,


Hello, are there any sounds coming from your television? If something happened to the colorwheel I dont think the TV would come on at all, I would by instinct take a look at replacing the DMD chip.

Jan 01, 2014 | Samsung HLR5667W 56" Rear Projection HDTV

1 Answer

Samsung dlp has static


I have seen this happen quite a bit. For some reason the input (cable jack) works loose from the board. I would try running your source signal (cable/dish) to another input on your tv...such as S Video/HDMI/Composite or whatever you have available.

Jan 07, 2013 | Samsung DLP HL-P4663W 46" Rear Projection...

2 Answers

My SAMSUNG DLP HLT5675SX TV seems to develop little black spots all over the screen and after a while these black spots become bright white spots. In fact if a non-used Input is selected and the screen is...


It is the chip that controls the millions of mirrors inside the tv. If they are black, they are stuck closed. If they are white, they are stuck open. I JUST had the same the same thing happen with mine. I bought it 3yr and 2 months ago and I had an extended warranty on it for 3 years. Well, needless to say, it was out of warranty and I was pissed. The store I bought it from suggested I call Samsung. Which, I did. They asked for the model number and told me that my model (hlt5675sx) was one of the ones that is covered becasue they had a problem with the chip. Within 2 weeks, my tv was fixed by a repairman who came to my house. It works perfectly, now and it didn't cost me a penny. Good luck.

Jan 11, 2011 | Samsung DLP HL-P5663W 56" TV

1 Answer

Screen on my HL-R5667W DLP is fading from the left


Ur tv have a convergence problems.The 2 STK convergence ICS are defective and dying.The shop will fix this for u about $300-350 for parts and labors.

May 08, 2010 | Samsung HLR5667W 56" Rear Projection HDTV

2 Answers

Samsung DLP TV; Green Lines


If you get green vertical bars or green dots in the picture but not in the menu screen (Digital board symptom)

Feb 28, 2010 | Samsung DLP HL-P5663W 56" TV

1 Answer

Samsung DLP HL-R5667W not turning on. Showed


Purple spots means Bad Light Engine Part number is BP96-00822J Encompass Parts Has them for
$950.00 - $350.00 core price Part $600.00
1-800-638-3328 Lamp# BP96-01073A

Ballast Board# BP47-00027A

Jan 08, 2010 | Samsung HL-R5667W 56" HDTV

1 Answer

Samsung DLP turns on and off - cycle repeats


make sure put the lamp door back before trying to turn it on because they have switches on them that allow the tv to turn on. If that is ok you probably have a bad ballast.
Call a local tv repair shop to further diagnose the problem.

Dec 10, 2009 | Samsung DLP HL-P5663W 56" TV

1 Answer

Hl-r5667w


I just responded to your other post check the connection between the lamp and ballast at both ends. Also did you get the same exact lamp as your old lamp, as Samsung has two different arc gaps and they wont work if you get the other type even though they look the same physically.

Jun 21, 2008 | Samsung HL-R5677W 56" HDTV

Not finding what you are looking for?
Samsung DLP HL-P5663W 56" TV Logo

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73118 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...