An expert who has achieved level 2 by getting 100 points
An expert who has answered 20 questions.
An expert that has over 10 points.
An expert whose answer got voted for 2 times.
Re: my printer did not come with the install disk
Same on Best Buy, they are not as good as they used to be. Oh well, here is the link to the printer drivers: http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=123&modelid=15603#DownloadDetailAct
Just click on the driver and downloads tab and you should find everything you need. If you need help let me know.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Important OS X pre-installation instructions: The Macintosh OS X driver found on the CD provided with your product is not intended for use with Intel-based Macintosh computers. If you have already installed the OS X printer driver provided on your product CD, please follow these important instructions before installing the "epson11769.dmg" file:
Open the OS X "Printer Setup Utility".
Select the "Printer Setup Utility" tab and click "Reset Printing System...".
Click the "Reset" button.
Restart your computer.
Install the downloaded "epson11769.dmg" file.
Installation instructions (some of the following steps may not be necessary):
Download the file.
Double-click the downloaded file to create a disk image on your desktop.
Open the disk image.
View the included "Readme First.pdf" document for important information.
Double-click the installer icon to begin the installation
You might have to uninstall the printer restart your computer then reinstall your printer click start control panel administrive tools computer management device manager scroll to ports(COM&LPT) + to expand you should see a communication port and Ecp printer port you might see a yellow?question mark this will mean you need to install a new driver for this device right click you will have options to update driver,disable,uninstall or select properties again you will have the similiar options also you can troubleshoot the device you could run the check disk utility click start run type cmd then type chkdsk/r/f which will scan for and attempt to repair any bad sectors and automatically fix any corrupt files on your hard drive then defragment your hard drive or control panel administrive tools,computer management ,disk management right click on your drive select properties click tools you should see click check now click start two boxes automatically fix files and scan for and attempt recovery of bad sectors place then a tick in both boxes then select check now,start should schedule this task when restart hope this helps
Same issue on my C7280 - just stripped it down and cleaned all the ink lines - forcing ink through the black line by manually actuating the pump and it appears to be working again but not sure for how long. Not something everyone would tackle as you need torx drivers and ability to take it apart which is tricky.
With the Lexmark printers communication subsystem you MUST let the driver ask for you to plug in the printer. DO NOT plug the printer into the USB port until told to do so.
To fix a fouled install: (1) Uninstall the Lexmark drivers in Add Remove Programs (2) Shutdown the computer (3) Disconnect the printer from the USB port (4) Restart the computer (5) Run the Driver Installation software (6) Cancel ALL attempts by windows to auto install the printer (7) When the software asks for the printer connect it and continue