Question about Dell 5100cn Laser Printer
Error message Processing LPD, printer won't pring
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The following steps are the troubleshooting steps that should be followed for error code 010 397.
First, the definition of the failure is <IOT Fuser Failure>, and means a Fuser Error is detected.
1) With power off, reseat the fuser by physically removing it from the printer, then reinstalling it and locking it in place. Turn the power back on. ( if the error is still present, proceed to step 2 ).
2) If reseating the fuser did not resolve the problem, Replace the fuser with a known good fuser.
( if problem is not resolved, proceed to step 3)
3) Replace the LVPS ( low voltage power supply ). ( if problem not resolved, proceed to step 4 ).
4) Replace the PWBA MCU ( printed wiring board assembly - machine control unit ).
END of troubleshooting.........
In most cases, the fuser itself is the problem. If you tried to reseat or replace the fuser while power was still on, the LVPS could have been damaged just as if there were an electrical storm.
Hopefully this helped.
Posted on Oct 02, 2008
Tips for a great answer:
Jan 11, 2014 | Dell 5100cn Laser Printer
Apr 05, 2012 | Dell 5100cn Laser Printer
Mar 15, 2011 | Dell 5100cn Laser Printer
Jan 19, 2010 | Dell Office Equipment & Supplies
Jan 19, 2010 | Dell 5100cn Laser Printer
Jun 10, 2009 | Dell 5100cn Laser Printer
343 people viewed this question
Usually answered in minutes!