Question about Canon (6981A002AA) for imagerunner 2200, 2800, 3300 Print Server

1 Answer

Error message on Cannon IR 3300

Finisher stalled while paper was coming out. It jammed. after jam was cleared. Finisher stalled again then screen when out and came back w/ error message: E000514-0000. Hard reboot and two unplugs later we got nothing. Do we need a Tech or is it something that can be fixed by a novice?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 168 Answers

That is a stack delivery error could be one of the motors or a board do you have the internal finisher or external

Posted on Jan 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Sir my canon 3300 error e00000-0000 pls help me


what you need to do is just resetting your machine.
1. Press * 28 * on your machine in a quick move.
2. Select copier
3. Select Err.
4. Select Clear then press O.K
5. Turn your machine off for 1 minute and turn it on again.

The error code will not be there anatmoreand your machine will be functioning well.

plz do rate solution if helped

Nov 16, 2010 | Canon (6981A002AA) for imagerunner 2200,...

3 Answers

Problem with printing on canon ir 2200


go to run prompt on client end and typ \\ip add of main pc where ur printer actually connected nd then u will get shared printer on display, u will get shared icon of ur network printer right click there nd connect it .... if it doesnt show any problem to connect it will work nicely ...........

Apr 16, 2010 | Canon (6981A002AA) for imagerunner 2200,...

6 Answers

CANON IR 3300 HAS ERROR CODE: E000002-0000


OK, but first try to clear the error under service mode, then replace fixing film assy, for EU 240V is FG6-6041.
To clear the error:
* 2 8 *
COPIER
FUNCTION
CLEAR
ERR
OK
Turn off and on ( main switch )

If this dont help - replace fixing film assy.

Dec 02, 2009 | Canon (6981A002AA) for imagerunner 2200,...

1 Answer

Paper Jam


this is probably the sensor inside the transfer sheet or the reflection plate under the cleaning blade assy being dirty. also there is a reflection plate on the bottom of the transfer sheet near the gear assy

Sep 16, 2008 | Canon (6981A002AA) for imagerunner 2200,...

1 Answer

Error code E00003-0000


The film (plastic) film is probably torn from a piece of paper that got jammed between the upper and lower section causing an overtemp lockout condition.
1. Remove left paper door.
2. Remove conector rear plastic(black) and fuser shields(2) screws holding fuser cover shield and unplug (3)connectors,2on the rear and a small one on the front lower right of fuser unit
3. Remove (2) assemlbly mounting screws one at rear and one
on the front sides.
4. remove unit and purchase new complete unit from cannon
5.Installed new fuser by reversing above steps.

May 28, 2008 | Canon (6981A002AA) for imagerunner 2200,...

3 Answers

E000014-0000


E000014-0000 ir 3300 canon machine solution

May 03, 2008 | Canon (6981A002AA) for imagerunner 2200,...

7 Answers

E000007-0000


Hello Evank,
I will gladly help you understand what's going on, but I am afraid nothing short of service call will actually resolve your problem. First off, the error code you are getting will cause the copier to just suddenly STOP...... which indeed will cause you to wind up with a paper stoppage but not a true paper jam. I apologize for what is like a distinction without a difference,but i just wanted to give the benefit of as much information as possible.The error code you are getting refers a subsystem of the copier called the fuser, which is a high temperature high pressure area that is common to all copiers. Because of the potential danger of high temp and pressure, all copier manufacturers design their products to be VERY sensitive to monitoring all aspects of the fuser as they do not wish to burn your building down. (bad 4 marketing) The E000007 error code refers to the fusing system. The code basically means that the on board computer of the copier did not get the signal it requires telling it that the fuser was working properly. That in fact it was not turning at the same time /speed as the copier. There is a sensor on this "fusing unit" that detects this speed. Either the sensor is bad, the fusing unit is indeed not turning at the correct speed and therefore is defective, or the dc controller ( a circuit board on the machine that processes most inputs) is defective. Most likely its the fuser/fusing unit which indeed is a "unit" and if it needs to be replaced will include the sensor previously described. The fuser (Canon also refers to it as a fixing unit) is good for @150000 copies more or less according to Canon and that is one of those things that I would call "according to the manufacturer" promises.In short, after this long winded description, unless you are a well trained copier tech, you will need one. But at least I have given you enuff info that you won't get screwed by the "copier dude" . :-) Of course I "IS" one. LOL . Good luck and I hope this helps you at least a little. ...........SPINAL........

Apr 23, 2008 | Canon (6981A002AA) for imagerunner 2200,...

Not finding what you are looking for?
Computers & Internet Logo

1,324 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Computers & Internet Experts

Tony

Level 3 Expert

2598 Answers

old marine
old marine

Level 3 Expert

1573 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Canon Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...