Question about RCA 25414RE3 Corded Phone

1 Answer

Message Light One one of our corded units, the "New Message" light is flashing and the screen says "MSG Waiting L3"there is no message waiting and none of the other units are showing that we have a message. How do you re-set the message light.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,130 Answers

The only thing you can do is unplug the unit from the wall and from the phone line. wait over night and see if this resets the unit. if it does not, I,m afraid there is a circuit problem in the phone and most likely will not be worth repairing, but try to hard reset like I said first. good luck

Posted on Jun 11, 2007

  • Timothy Dec 28, 2011

    I only have one line on the phone yet was receiving a message notice on L2, L3 and L4. I unhooked the phone line and put it into the data port. I switched the data switch to L2. I then used my cell phone to dial the number and leave a message. I retrieved it off L2 then deleted the voicemail. L2 stopped showing a message. I did the same for L3 and L4. After L4, the light stopped blinking.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a uniden dect1580 6.0 and the red light in the left hand corner blinks all the time.


That is the message waiting indicator, it is telling you that your Call Notes (Or whatever your service provider calls it's voicemail) has a message waiting. If you do not have a message waiting, you can turn the light of by following these steps:

Resetting the voice message waiting indicator
When you receive a new voice mail message, the new message LED on the top of the handset flashes and
appears in the handset display. In the event your message waiting light gets out of sync with your phone company’s
voice messaging system, you can manually reset it back to the “No messages waiting” state.
Press and hold FIND on the base for five seconds.
Note: The handsets connected to the base will start to beep, however, keep pressing for five seconds.
A beep sounds and the message alert tone is reset.

Jan 21, 2010 | Uniden Cordless Phone

1 Answer

Strata 3010 msg light won't turn off


To manually turn off the message waiting light press your extension button then press #409. Do this step for each message received.

Mar 25, 2009 | Toshiba DKT 3010 Corded Phone

2 Answers

Message waiting indicator light will not turn off keeps flashing


Slide the Nortel Grey Bar above the Hold & Rls buttons to reveal the setup button.

  1. Hit that button to show *Options List / # Setup list
  2. Press * to go into options.
  3. Use the arrow buttons or hit 3 to go into CLEAR MESSAGE WAITING
  4. Then hit 3 again to clear the message waiting
This should resolve the blinking light.

Nov 11, 2008 | Astra Meridian 9417 Corded Phone

1 Answer

Msg button flashing


go to the phone where the light is flashing press intercom #409. you may have to do that more than once. Keep doing it until the light goes out.
If the phone system is a DK 8 orDk16 press intercom 409 this will cancel the message waiting light that could have been cativated by a different extension.

Sep 22, 2008 | Toshiba DKT-2010 Corded Phone

1 Answer

Message waiting light


Go into the voicemail, press 5 for message waiting notification options, press 1 for message waiting light status.

Aug 08, 2008 | Panasonic KX-T7633 Corded Phone

5 Answers

New Message Light won't stop flashing


Don't know about other models, but I just called RCA small business phone support (800-511-3180) to find out how to clear the message light indicator on my 25210 2-line cordless phone when it continues to blink but there is no message.

All you have to do is hold down the delete button for a few seconds and it will clear. Hope this helps someone else from going batty!

Jun 02, 2008 | RCA 25414RE3 Corded Phone

1 Answer

Changing the LCD


that is usually caused by a message waiting light being turned on from an extension, the message waiting feature can be used to call voicemail or to call another extension, enter code #409 on ext 214 to cancel the msg waiting light

Mar 18, 2008 | Toshiba DKT-2020 Corded Phone

2 Answers

We have Toshiba Digital business phones, model # DKT2020-SD. When the message button is pressed on one of our extenions, it is directed to another extension rather than the the voicemail. The digital...


This is a very common problem with the Message waiting light, it can be used to turn on other msg waiting lights on other phones, or used to call back the voicemail after a message has been left in your mailbox. What you need to do is cancel the message waiting light, the code is Intercom + #409, then you will hear a studder dial tone, do that code from both phones (ext 11 and ext 24) and it should solve your problem. I would recommend after using the code, follow up with leaving a message in each phones mailbox to turn the light back on and see if then when you press it, it will take you to your mailbox.

I hope this helps, post back if not.

Jan 14, 2008 | Toshiba DKT-2010H Corded Phone

1 Answer

Msg light


I need more information. Your phone can be connected to one of many different Toshiba phone systems and you can also have different voice mail systems. I'm assuming you are talking about voice mail messages.

Can you verify that this is happening only on your phone? If you swap phones with another station does the light start to work? It's rare, but the light itself may be the problem.

Does this same thing happen to anyone else? Is the voice mail not turning on any message waiting lights? or is it working for others?

Not knowing all the details, you could try emptying all messages including saved messages. Then try to leave yourself a test message.

If you know how, you could have your mailbox deleted and re-created. This would need administrative rights to voice mail programming.

Most voice mails have an option to activate the MSG light or not when a new message arrives. Your's could have been turned off by mistake or glitch.

Nov 13, 2007 | Toshiba DKT-2020 Corded Phone

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

1,106 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Lands Phones Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Cindy Wells

Level 3 Expert

5340 Answers

David Burbee
David Burbee

Level 3 Expert

1871 Answers

Are you a RCA Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...