Question about Lexmark C543DN Laser Printer
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
you can reseat the fuser, and see if the message goes away. Or you will need to replace the actual fuser assembly. unfortunately you can't just remove/clear the error. see picture attached as this is what the fuser looks like
after you replace it let me know if you still receive the error.
Posted on Oct 19, 2010
You are correct, Below is that section from the manual. Before you follow this, i've found in the past that the cable connector is not seated properly on the rip board, so check this first.
If you require any of the instructions on replacing the printhead or board let me know.
Yellow Printhead Lost Hsync
Check for the correct installation of the all the cables to the RIP
Board assembly and to the Printhead assembly; J2, J3, and J4 on
the RIP Board. Go to “RIP Board” on page 5-11. If the cables are
connected correctly to the RIP Board and to the Printhead
assembly, replace the following FRU:
“RIP Board” on page 4-11
If this does not fix the problem replace:
Yellow Printhead Assembly - Go to “Printheads” on page 4-33.
Note: Whenever a printhead assembly is replaced, it is necessary
to perform the “Printhead Adjustments” on page 4-1.
Posted on Jun 03, 2008
SOURCE: Lexmark C752 108 Printhead error
They mean the respective printheads have lost the HSynch. The first thing the we do (and have had great success with) is to clean the laser lenses. Then check the head wiring. The following codes apply:
106 & 110 CYAN 107 & 111 MAGENTA 108 & 112 YELLOW 109 & 113 BLACK
Posted on Apr 27, 2009
Tips for a great answer:
Please click on the link http://bit.ly/oFCF7A to see instructions on how to go about the procedure.
For further assistance, please contact Lexmark Technical Support.
Jul 18, 2011 | Lexmark C540N PROD SPECS TBD Printer
Apr 12, 2011 | Lexmark C540N PROD SPECS TBD Printer
Remove the toner cartridge, and inspect the lenses on the toner meter cycle (TMC) card.It is positioned on the right side of the toner cartridges
Are the lenses blocked, or dirty? Clean them
If damaged replace them
Mar 07, 2011 | Lexmark C540N PROD SPECS TBD Printer
click on the link provided below.
does not resolve the issue, please try to reseat the printhead cable.
This maybe caused by a system card failure or a defective printhead.
For further assistance, please contact Lexmark Technical Support Center.
Feb 21, 2011 | Lexmark C540N PROD SPECS TBD Printer
Jan 28, 2011 | Computers & Internet
Dec 13, 2010 | Lexmark Office Equipment & Supplies
Oct 15, 2010 | Lexmark T632 Laser Printer
Sep 02, 2010 | Lexmark C540N PROD SPECS TBD Printer
Jun 16, 2009 | Lexmark E450dn Laser Printer
472 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: