Question about Xerox Phaser 6110MFP All-In-One Laser Printer

Open Question

Xerox work centre 3315 says invalid in cartridge

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

pineworks
  • 4041 Answers

SOURCE: Xerox Work Centre C2424 System Error

Hi there
I found some thing maybe do for you it may not be rhe right code you have at this moment but it come in handy for you.



082122a.jpg

31,004.40:6909: it's a mechanical initialization jam error. Pull out the paper tray to make sure it doesn't have a jam. Try also to manually feed some heavy paper or card stock through the printer to make sure the sensor in the preheater isn't stuck.

39,002.40 : DRAM test failure.

39,012.40:56208: "Cycle the power" and if that does not work replace the document feeder.

39,012.41: Document Feeder Optical Failure. Replace the document feeder.

4,0XX.6x: Process Control Software Fault.

· Reset NVRAM and then retest.
· Ensure ground integrity for the system
· Replace the EEPROM chip.
· Reboot the system.
· From the System Setup menu, go to "Information", "Troubleshooting"
· Service Tools menu.
· With the cursor at the top of the Service Tools menu, press both the Up Arrow
· and Down Arrow buttons to display the Hidden Service menu.
· Reset NVRAM is in there.

Also may be handy is this.


4,0XX.6x Process Control Software Fault
Error 04,041.66
Solution 1:

a. Reset NVRAM and then retest.
b. Ensure ground integrity for the system.
c. Replace the EEPROM chip.
d. Reboot the system.

1. From the System Setup menu, go to Information --> Troubleshooting -->
Service Tools menu.
2. With the cursor at the top of the Service Tools menu, press both the Up Arrow and Down Arrow buttons to display the Hidden Service menu.
3. Reset NVRAM is in there


Solution 2:

1. Turn the system power ON.
2. Wait for the Xerox logo to begin moving across the display.
3. Before the logo is centered on the display, press and hold the Back and Info buttons on the control panel.
4. Hold both buttons until the display reads “Beginning Service Mode Initialization”. Release the buttons and the system reboots into service mode with the Service Diagnostics menu displayed. Hope it will help you in some way of finding the fault. Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Posted on Feb 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My xerox 6600 keeps saying "invalid black" when replacing cartridge


The CHIP on the NON OEM cartridge is NOT current with correct firmware and as a result the cartridge(s) will NOT reset that a new cartridge has been installed.

Future hint...do NOT update as working printer drivers "ever"...as this is one way that the OEM's thwart the aftermarket TONER usage.

Good luck

Mar 13, 2016 | Xerox Phaser 6600DN

1 Answer

09-800 Invalid Toner Cartridge Message


Verify that you are using oem Xerox toner cartridge. If you're using an Oem Xerox cartridge and still getting this error it could also be the Crum Board, part number 140N63302.

Apr 11, 2013 | Xerox Phaser 3635MFP/X Multifunction...

1 Answer

The secretary ordered 3rd party toner cartridges for a Xerox Phaser 6130. After replacing the black cartridge the "invalid cartridge" message comes up. Is there a way that we can use the 3rd...


If you get the "invalid cartridge" message, try completely turning off and unplugging the unit. Then remove the cartridge, close the door and after at least 30 seconds, restart the unit. Then reinstall the cartridge. This worked for me!

Sep 26, 2011 | Xerox Phaser 6130 Laser Printer

1 Answer

Could the 6125 toner cartridges be used in the 6130?


No they can't ,.thats typical Xerox. Doesn't matter that the same ink is inside, they have to make the cartridge ad chip different. I worked for Xerox for years. Most arrogant company on earth.

Mar 23, 2009 | Xerox Phaser 6130 Laser Printer

Not finding what you are looking for?
Xerox Phaser 6110MFP All-In-One Laser Printer Logo

Related Topics:

1,538 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment & Supplies Experts

Xeroxrep

Level 1 Expert

33 Answers

Philip Hughes

Level 2 Expert

68 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...