Question about Panasonic Workio DP-190 Multifunction Laser Printer

1 Answer

Remove misfed paper code J93

Unable to print or do any other fuction because of code. I tried to copy through top port of machine and code came out. Opened both trays, checked back of machine & couldn't find any misfed paper.

Posted by on

  • michelangleo Jan 14, 2009

    Thanks. It was the sensor

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 284 Answers

J93 means = paper remained in adf . sounds like you have a problem with the reed point sensor in the adf door . little black plastic arm , right side should be dangling

Posted on Jan 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHAT IS 007-243 code error


This fault code isn't specific to one location/function on your machine, however, I believe it is directly related to your paper trays. Other fault codes begining with 007-??? state a tray sensor error, misfed media in a tray etc...
-
If you're trying to print to a specific tray and it won't print giving this error, you may want to try printing using a different tray. It is entirely possible you have some jammed up paper in the paper path and this will stop all trays from printing.
-
Potential solution:
-
Ensure you don't have any paper jams related to your paper path and trays, herre is a link that provides you all iinstructions to clear any paper jam on your device http://www.support.xerox.com/support/workcentre-7328-7335-7345-7346/support/enus.html?associatedProduct=workcentre-7328-35-45-46-built-in-controller

NOTE: The above link is a support knowledgebase and you can search on any problem you may have with your product by typing the natural language query in the search field, paper jam, can't print, scan fails transferiing etc...

Once you have determined there isn't a paper jam or if so gently remove any misfed paper.Reboot the device PO/PO power off/power on.
-
If the print jobs fail again, check your job status and see if there is any info listed for your print job, could be a media mismatch.
-
Try printing to another paper tray, if your job is calling for paper from tray 3 try using tray 4 or tray 5 etc..
-
I have provided a generic response to this question and kind of throwing ideas out there, if you could provide additional information I may be able to give a better solution.
-
Check the details of your job in the job status list?
A lot of times the machine will provide good direction on potential issues with a print job.
-
Are you trying to print on a custom paper size?
If you tell the print driver to print to tray 3 and you have 8.5X11 loaded in tray 3 and your print job from ypour PC is actually 8.5X14 then the job will not print simply put the media has to match the job.

I hope this helps.

Mar 10, 2015 | Xerox Workcentre 7345 Printer, Copier,...

Tip

Main Error MINOLTA DI 1611, DI 2011 Messages and Their Remedies


PAPER JAM A paper misfeed occurred in the
main unit.
Open the cover at the indicated
location, and then remove the
misfed paper. (“When the Message
(Flashing alternately)
OPEN XXX SIDE COVER
All misfed paper was not removed
from the main unit.
Check the message in the display
for the location of the paper misfeed,
and then remove the misfed paper.
ORIGINAL DOC.JAM A paper misfeed occurred in the
Document Feeder.
All misfed paper was not removed
from the Automatic Document
Feeder.
Open the Document Feeder Cover
and the Document Feeder, and then
remove the misfed paper.
(Flashing alternately)
OPEN DOC.FEED COVER
∗REMOVE PAPER IN
BYPASS TRAY∗
Paper is loaded in the Manual
Bypass.
Remove the paper from the Manual
Bypass.
FRONT COVER OPEN The Front Cover of the main unit is
open or not securely closed.
Securely close the Front Cover.
(Flashing alternately)
CLOSE FRONT COVER
DUPLEX COVER OPEN The Duplex Unit Cover is open or
not securely closed.
Securely close the Duplex Unit
Cover.
(Flashing alternately)
CLOSE DUPLEX COVER
DOCUMENT COVER
OPEN
The Document Feeder is lifted up
(while a document is loaded into
it).
Securely close the Document
Feeder.
(Flashing alternately)
CLOSE DOCUMENT
COVER
DOC.FEED COVER OPEN The Document Feeder Cover is
open.
Securely close the Document
Feeder Cover.
(Flashing alternately)
CLOSE DOC.FEED
COVER
TONER EMPTY The toner is empty. Copying and
printing cannot be performed.
Replace the toner bottle with a new
one.
SUPPLY TONER
PAPER EMPTY The selected paper tray has run
out of paper.
indicates the paper tray, and
“XXX” indicates the paper size.
Load paper of the specified size into
the specified paper tray.

on Dec 18, 2009 | Printers & Copiers

1 Answer

I have Panasonic network printer workio 8020, Fault code J93 is showing on display but there is no paper misfed in adf.


There is a sensor that is either knocked out of position or broken. It is not that difficult to take apart if you are a bit handy. First remove the covers and then remove the top cover.

Feb 06, 2014 | Panasonic Workio Dp 8020e

1 Answer

Richo 2045 paper misfed in C. I HAVE CHANGE THE PHOTOSENCOR AND THE PROBLEM STILL EXIST


i think you were cleaning the machine so when cleaning these type of machines you must be very careful.Okay you must change laser unit and don't blow these machines when cleaning because once the dust goes to laser unit it gives you a code/paper misfed so try to change laser unit

Sep 14, 2011 | Ricoh Aficio 2027 All-In-One Laser Printer

1 Answer

I have a xerox workcentre XL2130. It had a bad paper jam. I cleared it - now it has an error code E4. I've turned it off and on - hit the clear button - nothing is clearing it? Help! Thanks, Stacia


YOU STILL HAVE A PROBLEM IN THE PAPER PATH...

DOWNLOAD THE USER MANUAL

Clearing the Paper Path
- E-1, E-2, E-3, E-4, E-5
When a paper misfeed occurs the red misfeed indicator flashes
on the WorkCentre diagram, and an E status code will flash in
the Display Window. Paper misfeeds may occur in the areas
shown below. Follow the steps below to locate and clear the
misfeed.
Note: Ensure that the alternate paper tray is lowered
(XL2140df only).
Caution: Do not touch the shiny drum cartridge surface.
Scratches or smudges will result in poor copy quality.
Do not remove paper through the bypass. Unfused toner may
adhere in the area, resulting in smudged copies.
E-1
Steps 1-2 for XL2140df only
1. Lower the right Side Tray 2 Access Door.
2. Remove the misfed paper.
3. Close the Access Door.
If paper cannot be removed, open drawer (2) clear misfed paper.
4. Close the Side Cover.
E-2
1. Press the Release Latch to open the Side Cover.
Exit Area
Paper Feed Area
Fuser Area
Side Cover
35
- E-1, E-2, E-3, E-4, E-5 (continued)
Caution: Do not touch the shiny Drum Cartridge surface.
Scratches or smudges will result in poor copy quality.
2. Carefully remove the misfed paper in the direction shown.
If paper cannot be reached, open the paper trays and remove
misfed paper.
E-3
Fuser Area
Warning: The fuser area is hot. Take care when removing
paper from the fuser area.
Note: Ensure that the Alternate Paper Tray is lowered
(XL2140df only).
1. Press the Release Lever to open the Side Cover.
2. Pull down on the fuser lever.
• This will release pressure on the paper.
Caution: Do not pull paper up through the fusing unit. Unfused toner
may adhere in the area, resulting in smudged copies.
3. Remove the sheet of paper in the direction shown.
4. Close the Side Cover.
E-4 and E-5 (2-sided Reverse Copy XL2140df only)
Exit Area
1. Pull down on the fuser lever.
• This will release pressure on the paper.
2. Gently pull the paper out through the exit area.
36
- E-1, E-2, E-3, E-4, E-5 (continued)
3. If not accessible, turn the knob in the direction of the arrow
to move the paper to the exit area.
4. Gently pull the paper out through the exit area.

Feb 12, 2011 | Xerox WorkCentre XL2130f Laser Printer

1 Answer

How do i fix an upper misfed jam?


Try removing the paper tray first, the top page will likely be rumpled in some way. Remove that page, return the paper tray, then open the front cover. If there is any paper obviously stuck in the machine, carefully remove it.

My machine does these a LOT, I think if you get the problem frequently you'll need to have the rollers replaced.

Nov 17, 2009 | Ricoh Aficio SP C222SF All-In-One Laser...

1 Answer

MISFED INDICATOR LIGHT FLASHING


There is no code to run.
Did the paper come out as an entire sheet? Or was it torn? There is either a small piece of paper that remains in the machine, or you dislodged a paper switch in removing the jam.

Apr 23, 2009 | Sharp AL 1631 Copier

1 Answer

Paper jam in back top area of a konica minolta 2400w bob.crane@ihug.co.nz


moz-screenshot-7.jpgClearing Media misfeeds
To avoid damage, always remove misfed media gently, without tearing it. Any pieces of media left in the printer, whether large or small, can obstruct the media path and cause further misfeeds. Do not reload media that has misfed.
Note
The image is not fixed on the media before the fusing process. If you touch the printed surface, the toner may stick to your hands, so be careful not to touch the print face when removing the misfed media. Make sure not to spill any toner inside the printer.

Clearing Procedures
1. Pull the lever, and then open the top cover. If there is paper in the output tray, remove it, and then fold up the output tray before opening the top cover. Do not touch the transfer belt.

2. Slowly pull out the drum cartridge. removed drum cartridge on top of the printer keep it close and insure it is safe and stable where it sits. Be sure to keep the drum cartridge horizontal and place it where it will not become dirty.
Do not leave the drum cartridge removed for more than 15 minutes, and do not place the removed drum cartridge in a location where it would be exposed to direct light (such as sunlight).

3. Remove any misfed media.

4. Reinstall the drum cartridge

5. Carefully close the top cover

I hope this helps you and thanks for your question.
I the problem persists let Fixya know and we can detail a few items to check in order to determine the cause of the frequent misfeeds.....thanks........Whytfang


Aug 28, 2008 | Konica Minolta magicolor 2300DL Laser...

1 Answer

SPF misfeed light


hi im jules_09 if the misfed sensor is on there is no process that can restart,the light togo off.once again check which sensor is on,there are 3 misfed sensor in the machine 1st is in the bypass tray area the 2nd in inside the machine itself  the 3rd is at the fusing check which sensor is on better yet shieck all sensor,there just a piece of paper or something stock in thoose sensors

Oct 11, 2007 | Sharp AL 1631 Copier

3 Answers

Printer message: Unable to Print


5A means that the purge cam stopps abnormally when it is in use. This could be of a broken cam shaft. You have to replace the whole purge unit. This is a service job to do!

Aug 27, 2007 | Brother MFC 420CN All-In-One InkJet...

Not finding what you are looking for?
Panasonic Workio DP-190 Multifunction Laser Printer Logo

1,057 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Printers & Copiers Experts

Mohan Sriraman
Mohan Sriraman

Level 2 Expert

490 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4756 Answers

Are you a Panasonic Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...