Emachine w3503 system restore lost verification code for office
After I did a total system restore after moving due to crash of system I lost the code for office 2003 that was originally installed on my PC. Where can I get this code, I am an online student with homework due today......
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Don't go by what you see in windows as far as the memory that is being used. Go into the BIOS of yoru emachine and in the BIOS it will tell you how much memory is in your system. As long as the total memory in there is 512mb, that is what matters. Windows doesn't always give accurate info but the BIOS will.
If the BIOS doesn't show the full 512 then its either a memory stick problem or a motherboard issue and you won't truly know for sure until you try other memory sticks.
The amber power light indicates that your computer has been "sleeping" or "hibernating" and usually all it takes to restart the computer is tapping a key on the keyboard. If this is not the case, try holding the Power switch down for 6-10 seconds to force the system off. Restart in Safe Mode and try to find the settings for Sleep/hibernate, open the control panel and open the Screen Saver. Select "Change Power Settings" and set it for "Never" on sleep and hybernate.
The term: SM Bus is the same as chipset driver. Your e-Machine came with restore CD's. You can run the restore CD to repair your system, you shouldn't loose any data repairing windows.
If your able to load windows, load the driver CD from e-Machine and re-install the chipset drivers.
this type of problem is due to viruses in the system you hv not updated latest signatures may be, or simultaneous 2 antivirus may crash may occur, scan the system from the bootable antivirus cd clean for viruses, next it will sure boot to normal mode,
I had to restore my Emachine. I have Windows Vista
(1) Go to start menu
(2) Click on all programs
(3) click on Emachine
(4) click on Emachine recovery management
(5) Click on restore on the bar across the top
(6) click on restore to system factory default