Question about Hanns.G Corporation HW191D 19" LCD Monitor

Open Question

LCD MONITOR I-INC CY199 schematic diagram - Hanns.G Corporation HW191D 19" LCD Monitor

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1684 Answers

SOURCE: i-inc CY199 monitor will not turn on

Hello,

It sounds like you have a monitor with a common problem, we have repaired many Hanns-G monitors with this problem. After a few years some LCD monitors will blow a power supply. The problem is caused by parts called capacitors overheating in the confined space of the monitor. If you are good at electronics repair/soldering you can usually fix the problem. Check out a few pictures on my web site www.ccl-la.com/badcaps.htm You can take the back cover off your monitor and look for the bad parts,replace any that look like the pictures and your monitor should work fine. The capacitors do need to be installed with the correct + and - connections, note the stripe on the old one and insert the new one the same way. If you can't do the repair we offer a repair service, contact us for more details.

I hope this helps, if so please rate my solution.

Buddy
Corporate Computer
www.ccl-la.com
Over 21 years of computer and printer support/repair

Posted on Aug 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I want power supply circuit diagram for samsung 740n lcd monitor


Samsung SyncMaster 740N LCD Monitor
Click the link below to download the Schematic diagrams:
http://manuals.xtreemhost.com/dw/samsung_740n_SCH.pdf

Note: PDF manuals require the Adobe Acrobat Reader for viewing and printing.http://get.adobe.com/reader/

Oct 28, 2011 | Samsung SyncMaster 740N 17" LCD Monitor

1 Answer

Hi, I need schematic diagram for IP-48135 T board....


Hello,

The schematic diagram is going to be very hard to get. We do repairs on this model. What information do you need? The most common problem is the capacitors on the power board. You can find this repair guide at: http://www.ccl-la.com/blog/index.php/repairing-the-samsung-940mw-lcd-tv/ If you need other information then let us know at: tech@ccl-la.com and we will get glad to assist you in the repair.

CCL_Tech
Corporate Computer
www.ccl-la.com

May 21, 2010 | Samsung SyncMaster 940MW 19" LCD Monitor

2 Answers

I-INC CY199D EEPROM failure


Hello, The EEPROM needs to be replaced and your problem will go away. I have one and replaced it in mine and it works fine now.

Jan 22, 2010 | Computers & Internet

1 Answer

I-inc CY199 monitor will not turn on


Hello,

It sounds like you have a monitor with a common problem, we have repaired many Hanns-G monitors with this problem. After a few years some LCD monitors will blow a power supply. The problem is caused by parts called capacitors overheating in the confined space of the monitor. If you are good at electronics repair/soldering you can usually fix the problem. Check out a few pictures on my web site www.ccl-la.com/badcaps.htm You can take the back cover off your monitor and look for the bad parts,replace any that look like the pictures and your monitor should work fine. The capacitors do need to be installed with the correct + and - connections, note the stripe on the old one and insert the new one the same way. If you can't do the repair we offer a repair service, contact us for more details.

I hope this helps, if so please rate my solution.

Buddy
Corporate Computer
www.ccl-la.com
Over 21 years of computer and printer support/repair

Aug 10, 2009 | Hanns.G Corporation JW-199DPB 19" LCD...

1 Answer

My I-Inc CY199 is broken


check if the video card is ok if it is ok replace your vga cable

Jul 11, 2009 | Hannstar I-Inc TW-191D Monitor

1 Answer

Schematic diagram


plz send me philips lcd monitor diagram power supply model 150B

thanks

regards
asif mansouri

Oct 20, 2008 | Computers & Internet

1 Answer

I-INC cy199


I have the exact same problem myself that just happened today. It apparently happens about a month or two after the warranty expires ;) I have 2 on my desk and one of them just stopped working. It is obviously a hardware problem and cannot be fixed without sending it back to the factory. They quote $65 for labor plus shipping. I might just go in the junk pile and I'll have to buy another.

Jul 23, 2008 | Hannstar I-Inc TW-191D Monitor

16 Answers

I-INC CY199D lcd monitors will not turn on


The problem is the program for the graphics card is stored on a 16K serial eeprom which is used as a rom this can get corrupted which causes the problems you are experiancing.
I have repaired three of these monitors by re-flashing the eeprom with a program cloned from a working monitor all worked fine after refashing.
Now the bad news as the eeprom is used as a rom it is write protected on the board so the only way to program it is to remove it flash it with a valid program and then replace it easy if you are a surface mount expert.and have a serial eeprom programmer.

May 31, 2008 | Hanns.G Corporation JW-199DPB 19" LCD...

2 Answers

Dual monitors in XP Pro - HP Pavilion zd7000 laptop & I-Inc CY199 monitor


in that case u need a video hub, like : display booster. we call it a vga display booster. this may increase the quality of a picture. because when we attach any display unit, the image appears in two portion. it's gain is to low. to make it more sharp, monitor itself add some colour to that picture. the vga signal is fixed from inside of the monitor with resistance, so u can't make any variations in picture. that's why u guys need that VGA booster.

Jan 14, 2008 | Computers & Internet

Not finding what you are looking for?
Hanns.G Corporation HW191D 19" LCD Monitor Logo

Related Topics:

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hanns.G Corporation Computers & Internet Experts

kj henriksen
kj henriksen

Level 2 Expert

194 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

 Grubhead
Grubhead

Level 3 Expert

5056 Answers

Are you a Hanns.G Corporation Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...