Question about Hoover UH70070 Bagless Upright Cyclonic Vacuum

1 Answer

Power just stopped working

Was vacuuming, stopped to empty cylinder, put back together and now power won't work

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Master
  • 14,553 Answers

It may be chance but I would locate the air filter, if very dirty it will cause the motor to heat up and trip a thermal breaker, last one I saw we had to wait several hours for the breaker to release.

Needless to say when I washed per the instructions on the filter the water ran black for several minutes, had to let it dry overnight and not use air or heat directly on it.

Most that can be washed are foam and have instructions of some sort where the filter installs.

hope you have that and not a electrical failure in the unit.

Posted on Dec 11, 2012

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 18 Answers

SOURCE: While vacuuming a cord got stuck in my vacuum. I

your machine is still blocked time for the screw drivers, good luck

Posted on Feb 16, 2011

mc1bean
  • 3053 Answers

SOURCE: Hoover upright vacuum Model U5095-540 - had for

Hello, ms

I was trying to help you out here. Maybe this will help some? I was going back to some customers that asked questions in the recent past and even farther back. It appeared that no one answered some of them, So, I thought I would take some of my own personal time
to see if I can help. Even though this a Informational site may not have your exact model or brand, But this site will help you a lot. Here is the site link about everything you want to know about vacuum cleaners and possibly yours, from repair to trouble shooting it.

http://home.howstuffworks.com/vacuum-cleaner.htm


Please if this helped you at all, if you can find the time and in your heart to rate my help and some kind words written would be appreciated for my free help, I would appreciate it. Like I said I just tried to help, If anything this is good information for future problems. If you felt that my free help was a waist of time for you, I'm sorry.I do not get paid to help people on the site, I do it cause I like to help.

Here is also my direct link to my own pages of other areas of my expertise for other problems you might have in Automotive, Appliance, and Electronics. Drop In anytime for my help.

Thanks, Mike


http://beta.fixya.com/users/mc1bean

Posted on Oct 30, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Loss of suction


do not connect to electricity at this point claim a little work area put a blanket down as you are going to strip it all down into little bits clean and then put it all back,
Take apart power cable unwrap, unclip middle glass cylinder section to empty rubbish out, there should be a filter at the base that you can see now unclip clean put back, empty rubbish out of cylinder clean base and top rubber section and filter section with fine brush, use a wet cloth to wipe clean all black rubber suction connectors put back, at the back there will be a hose connector at the base unplug clean put back and make sure no debris is in any of the connectors and underneath where the floor brush is before you start puting it all back , Hope this helps

Feb 17, 2014 | Eureka AirSpeed Bagless Zuum

2 Answers

My Electrolux Rapido wet&dry won't start. The battery is empty and the blue light flashes when I plug in the charger.


this sounds totally silly but is the power button on the vacuum actually off? Had the same problem, where the battery was completely empty i didn't know my son had switched the vacuum on put it on charge and the light was flashing. I took it off the charging stand pressed the power button then put it back....now charging perfectly. Anyone who doesnt have this appliance will think you sound stupid but its just a clicky button so visually the button looks the same on or off.

Apr 04, 2013 | Electrolux Zb4106wd Rapido Wet And Dry...

1 Answer

Hi, I have the Hoover d14194 bagless pet vacuum..when I switched it on it worked but kept cutting out, I emptied it and cleaned the filters but now it won't even switch on.is there something I can


You could check the motor brushes, if they are worn and check for loose wire connections.
Another possibility is that there may be a break in the lead, plug it in and shake the lead, if it starts and stops you have probably found your problem with a broken lead.

Jan 01, 2013 | Vacuums

2 Answers

Dyson dc08 not turning on


you can go to: http://www.dyson.com/support/help.asp?article=51&product=DC22-MOTORHEAD-US, this a section for troubleshooting for dyson.
You must clena any clogged from hose, bag.or blockage, Clean the filter. In most time, the machine has a thermic switch or thermal fuse, Inspect or test and replace or reset.
God bless you

Jul 15, 2012 | Dyson DC08 Cylinder Bagless Canister...

1 Answer

Power won't turn on


Hi Colleen,

I'm sorry to hear you're having difficulty with your DC25. If your machine won't run, it may have overheated due to a blockage, and the filters may also need a wash. You should find you machine will run again once it's had at least two hours to cool down - however, to make sure this doesn't happen again, please follow the steps shown in our online Support guide:

http://www.dyson.com/support/help.asp?article=51&product=DC25-ALLFLOORS

This should resolve the issue, but if you'd like any further assistance or advice, please give our Helpline a call on 0800 298 0298 (UK), or 1-866-693-9766 (US).

Best wishes,

Jack
Dyson Online Customer Support
http://www.dyson.com

Apr 12, 2012 | Dyson DC25 All Floors Bagless Upright...

1 Answer

I have a miele S712 (2 yrs old worked fine yesterday) - I had been doing some diy work inside and had the vac on just to reduce some of the dust in the air - after a while the vacuum fizzled out. I...


you have got dust in the micro switch and it is not latching on, if you look at this and clean it, that will solve your problem, however blowing the motir has probably wrecked the motor bearings.

Jun 02, 2011 | Miele Vacuums

1 Answer

Putting back together Vacuum after emptying it


http://static.howstuffworks.com/gif/how-to-repair-small-appliances-30.jpg

Although this may not be a very clear diagram, maybe you can see in it what you are looking for.
Just copy and paste into your browser search bar.

Feb 07, 2008 | Kenmore 34721 Upright Vacuum

Not finding what you are looking for?
Hoover UH70070 Bagless Upright Cyclonic Vacuum Logo

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Jim Parker
Jim Parker

Level 3 Expert

1041 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...