Question about HP Pavilion dv9000z Notebook

2 Answers

Cannot creat a recovery cd

I have hp pavilon dv90000 i could not create a recovery cd cause the recovery partition is not found

Posted by on

  • neama Jan 14, 2009

    Thank you tat4u

    I would be very grateful if you would send me this program to the following address
    neama@hotmail.com
    Thank u again for your support




×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 520 Answers

Send me your email and I'll post you a recovery program.
it take a mirror image of your hd and the program can be started from startup(f11)
so if you mess up windows you can recover from startup(reboot/before windows or any drivers load)
eg when you boot up it says recovery f11 and if no response it then goes to start windows..
excellent program ...Ive installed it on 3 of my laptops..never had to use it yet so diliberatly f"""""d windows up to try..works a treat.

Posted on Jan 14, 2009

  • tat4u
    tat4u Jan 15, 2009

    just tried to send file but too large for attachment can find program at http://hp.com click on support and drivers...check download drivers and software...type brand details for product eg nc4000..

    put that in if you like its the same software.in next screen select the match if you typed nc4000 select notebook.next screen select xp or xp pro((dont really matter) next screen scroll down page to system management...look for altris local recovery...download it to a folder or desktop..unpack it and follow instructions

×

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Let me tell u, when u got the laptop u need to create the recovery partition in the laptop when u get if from store. So now we cannot do anything except to buy the recovery cds.

Thanks and Regards
Honey

Posted on Jan 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

How Do I Correct the Error and Recover an Acer Computer hard drive?


In order to correct the hard drive partitions so the recovery program will work, you can use a variety of tools listed below.

1) Active@ KillDisk - Use their free killdisk program to wipe the hard drive clean off all partitions.

2) Ubuntu or another Linux alternative bootdisk. Create a boot disk for the Ubuntu Live CD and boot the computer from it. During the boot process it will ask to "Try Ubuntu without any change to your computer". This is the option you want. Once Ubuntu loads, find the partition editor program under the System, Administration menu..

To delete a partition, right click on the partition that you wish to delete and select "Delete" from the menu. Once you are sure that you've selected the correct partition, and are positive that you have backed up all the files or data that you wish to save from that partition, click the "Apply" button at the top of the Window, and the partition will be deleted.

3) Use the Acer Hard Drive Format Utility, on some versions of Acer computers when you have the option to create Recovery disks, the system creates a hard drive format utility CD as well. Boot from this CD and format the hard drive.
The utility will recreate 1 partition (C: drive), after the partition has been created, you'll be able to reload the HDD with the backup media. The file is an ISO image for CD media only (not compatible with floppy diskettes). Create a CD disc from the ISO image file using a CD writer program on another computer.

Once the hard drive partitions have been deleted by any of the utilities above, you can proceed with rebooting the computer using the Acer System CD and proceeding with the complete recovery of the system.

on Jun 25, 2010 | Computers & Internet

2 Answers

How do i restore factory settings without a cd


If you have windows , Click start, all programs, accessories, system tools,system restore, select the restore point and follow instructions to restore.

Nov 29, 2010 | HP Compaq Business Notebook NX9005...

1 Answer

How do you restore it


All HP's and Compaqs (as far as I know) come pre-installed with a recovery partition. This replaces the functionality of a recovery CD or DVD, only without the hassle of losing or scratching a recovery CD or DVD. There is one drawback to this method; namely that if the hard drive (or more likely for you) solid state drive gets damaged or erased, you run the risk of also erasing this recovery partition. If this happens, you will need to go to HP's website to order a recovery USB key. Information for ordering a recovery key can be found here. Keep in mind you can only order one recovery key per system, so if you do have to take this route, be sure to create another using the information at the bottom of this post.

  • Press the Power button to start the PC, and then press the f11 key when the standard BIOS prompts are displayed on the black screen.
    NOTE: Pressing the f11 key during startup on a computer with an HP factory image will start the system recovery process even if the prompt is not displayed.
    • If the HP Recovery Manager can access the recovery partition on the hard drive, a prompt to backup the user files before beginning the recovery is displayed. Follow any on-screen instructions.
    • If the HP Recovery Manager cannot access the hard drive to fix any system errors, you will need to use the personalized recovery disc that you created to recover the hard drive to its original condition.
    • If you have not created the personalized recovery disc, or the discs are corrupted, you can order a replacement recovery disc from HP.
  • If prompted to use the Microsoft System Restore program, click No , and then click Next .
  • When prompted, if you want to backup your personal files and settings, select the Back up your files first (recommended) option, and then click Next . Follow the on-screen instructions.
  • When prompted to Recover without backing up your files , please STOP before clicking Next . WARNING: This is the final opportunity to change your mind about recovering the PC and deleting all the files and programs. Once you click Next , the restore process cannot be stopped.
  • If you are satisfied that you want to begin the recover process, click Next . The PC immediately begins formatting the hard drive and destroying all data.
  • The recovery process may take up to several hours and will return the PC to its original condition. Any custom settings, drivers, software programs and updates, and/or hardware updates are lost and must be reinstalled.


    Once this process is complete, you can create a recovery USB drive using the procedures outlined below:

    There are three options for recovering these mini notebook PCs to their original operating system image.
    • Option 1 - Use the Recovery Manager program on the recovery partition on PC. For Windows 7, turn on the power switch, press Esc key at boot followed by F11 key for the recovery menu. For XP, press F6 key for Roxio BackOnTrack utility.
    • Option 2 - Create a personal set of recovery media. For Windows 7 and XP use the HP Recovery Manager to create a recovery image on either a DVD or an 8 GB USB flash drive). For XP, use Roxio BackOn Track to create a recovery image.
    • Option 3 - One-time purchase of the Recovery USB recovery key.
    The USB Recovery key can be purchased from the HP web site. The USB key is larger than normal thumb drive. HP can ship only one USB recovery key per unit.

    Nov 25, 2010 | HP Mini 210-1030NR Netbook

    1 Answer

    I bought hp laptop pre-installed with windows 7. There are partition as C(200gp) and D(25gb).Now i need more partition of size 100gb so i need to reinstall windows 7.They didnot provide windows 7 CD. how...


    Usually, pre-loaded hp laptops have an utility to create (only once) recovery disks. U will need a few high quality DVDs or up to 20 CDs. The laptop must be connected to AC power during this process. The how-to is in Ur documentation that came with the laptop (probably in some pdf document). Usually, the procedure to create set of recovery discs is as follows (maybe it changes according to model): 1. Select Start > All Programs > Recovery Manager > Recovery Manager. Recovery Manager Opens. 2. Click Advanced Options. 3. Click Recovery disc creation, and then click Next. 4. Follow the on-screen instructions.
    Pls, send the laptop exact model, so I'll be able to verify this procedure.
    BTW, did U considered use of some partition manager to resize the partition?

    Jun 09, 2010 | Logitech Cordless Mouse

    2 Answers

    Recovery disc


    Your laptop is equiped with an apticarive which is defined as Lightscribe Super Multi DVD Writer (+/-R +/-RW) with Double Layer support. This is supposed toRecovery partition (including possibility to recover system, applications and drivers separately); Optional re-allocation of recovery partition; Recovery CD/DVD creation tool; Symantec™ Norton Internet Security™ 2009 (60 days live update); Notebook Help & Support
    Microsoft® Internet Explorer; Windows Mail; Adobe® Reader.
    My personal advice is to install NERO CD/DVD wring software which has the option to create a recovery CD............................sodeep

    Sep 28, 2009 | Computers & Internet

    1 Answer

    Hard deive / non-system errod when running recovery CD's


    Hi,

    My name is Armymason, have you thought about running a hardware diagnostic test? Do a search on the internet for a free one and check to see if the hard drive is bad.

    Thanks,
    ArmyMason

    Feb 25, 2009 | HP Pavilion a1610n PC Desktop

    1 Answer

    HP MEDIA CENTER 864N Desktop PC&p RECOVERY CD


    NOTE: Most HP and Compaq desktop PCs that ship with Windows Vista and XP do not come with recovery discs. Instead, they use a hidden space (partition) on the hard drive to store the recovery information. Using a hidden partition provides a convenient, more stable recovery solution.
    Step 1: Create a set of recovery discs or a recovery DVD
    To create the recovery disc set, Click Start , All Programs , PC Help & Tools (or similar), open the HP or Compaq Recovery CD-DVD Creation software, and follow the on-screen directions.
    If you cannot create recovery discs or your discs have become damaged, continue to the next step.
    Step 2: Order recovery CDs on the Web
    If you are not able to create a set of recovery discs, you may be able to order a set of replacement discs from HP. HP maintains a stock of replacement recovery discs for several years after the product has been released. However, because of licensing restrictions, HP is only able to provide these recovery discs for a limited time. If your computer is several years past its warranty period, HP may not be able to supply replacement discs for your computer. If this is the case, you can install a new operating system that meets the minimum system requirements of your computer, or, alternatively, upgrade your computer hardware.
    To find out if HP has recovery discs that you can order and to order them from HP, use the following steps:
    NOTE: The steps in this section apply to United States and Canada. For Europe, Middle East, and Africa please refer to the HP support document Europe, Middle East, and Africa - Statement on the Availability of the Recovery Software on CD . For other countries/regions, contact your local HP support center for information about obtaining recovery CDs.
    Go to the Software & Driver Downloads page .
    Enter the product number or model name for your computer into the field provided.
    Figure 1: Product name/number field
    7195023.gif
    Click the operating system link (the version of Windows that came with your computer).
    Figure 2: Example of operating system link
    f96d267.gif
    Find the Recovery Disc ordering section and click the link to start the ordering process.
    NOTE: Before trying to order, make sure that you have read the important "Read this..." information listed in this Recover Disc ordering section.
    Note: - If the link to order a recovery disc set is not available, there may not be any more sets available for purchase. HP cannot create recovery discs that contain a version of Windows that has been obsoleted by Microsoft, such as Windows 95, 98, and Me. Some recovery disc sets may have run out of stock and may not be available to order.
    Figure 3: Recovery disc ordering links
    7640107.gif
    Follow the directions from the "Read this...” article and from the ordering pages to complete the ordering process.
    NOTE: The ordering pages use a secure connection to protect your privacy.
    If you cannot create a recovery disc set and you cannot order a recovery disc set from HP, go to the next step.
    Step 3: Contact Support
    If you have tried the steps 1 and 2 and could not create or obtain a recovery disc set, contact HP Customer Care . HP Customer Care may be able to send out new discs or replace defective versions depending on your situation and availability.

    Jul 21, 2008 | HP Computers & Internet

    1 Answer

    Acer 5050


    by default acer 5050 have 3 partitions
    1. OS partition (C)
    2. Data (D)
    3. Recovery partition (hidden).

    If you deleted recovery parition, you can't recover your C parition using Alt+F10. Your only option is recovery from cd/DVD recovery that you created. if you didn't create the cd/dvd, you can call acer support to buy the recovery dvd.

    Mar 16, 2008 | Acer Aspire 5050 Notebook

    3 Answers

    System recovery


    Hi

    Please go into my conputer and check whether u have a recovery partition or not..... If you have... restart your system and tap on F11..... go to recovery partition... U'l get a pop up to create recovery cd's.... Plz create the cd's once u get the pop up

    Oct 22, 2007 | Computers & Internet

    Not finding what you are looking for?
    HP Pavilion dv9000z Notebook Logo

    Related Topics:

    122 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top HP Computers & Internet Experts

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18384 Answers

    Tony

    Level 3 Expert

    2600 Answers

    mukhtar21 shaikh
    mukhtar21 shaikh

    Level 3 Expert

    2017 Answers

    Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...