Question about Konica Minolta Bizhub c203 Copier
Fuser temp too high to reset turn off machine then turn on while holding down the utility/counter button when the trouble reset button comes up on the touch screen touch it and make sure it says ok then turn the machine off wait 10 seconds and turn back on if error code comes back fuser unit will have to be replaced
Posted on Feb 06, 2013
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I have a Konica Minolta CSPRO EP1054 (in the Middle East)
I accidentally plugged the EP1054 copier into a 110V outlet instead of the 220V. Immediately the malfunction code (error code) of "C05" appeared along with the "Call Tec Rep" indicator light (wrench).
I followed the instructions posted by "Soul Visitor" ... i.e., I found the "Trouble Reset Switch" (not shown in the user manual) by opening the upper back panel and pressing the small black button in the lower right hand corner of the middle circuit board (green).
It worked perfectly!
Posted on Jan 16, 2009
This model has a tendency to fold corners. Have the tech. check the input guide to the fuser unit and also to check the door on the right hand side above the bypass tray. Its a fairly common issue. Also have them search konica-minolta's website for other techs having this problem. Good Luck !
Posted on Aug 11, 2011
Tips for a great answer:
May 07, 2014 | Konica Minolta Office Equipment & Supplies
Apr 17, 2014 | Konica Minolta Bizhub C360
Feb 18, 2014 | Konica Minolta Bizhub C360
Jan 21, 2014 | Konica Minolta Office Equipment & Supplies
Oct 12, 2013 | Konica Minolta Bizhub C360
Aug 06, 2013 | Konica Minolta Bizhub C360
Nov 16, 2010 | Konica Minolta bizhub 350 All-In-One Laser...
May 13, 2010 | Konica Minolta bizhub C250 All-In-One...
Feb 11, 2010 | Konica Minolta bizhub 350 All-In-One Laser...
8,893 people viewed this question
Usually answered in minutes!
Level 3 Expert
Level 3 Expert
Level 2 Expert
Step 2: Please assign your manual to a product: