Question about Fisher and Paykel (IWL12)

1 Answer

Fisher & paykel smart drive agitator placement

Have replacement agitator. Have unscrewed wingnut on old one, but it seems to be stuck. It won't lift out. Now what do I do?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Fisher and P... Master
  • 17,129 Answers

Use some de-greaser spray like WD-40 to loose the jammed nut. Also a slight heat with a gentle tap can release the jammed nut.
Do not try to use excess force to damage the head but give it time to sink in so that it will release. Use clockwise and then counter to release the jamming.

Posted on Dec 11, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Fisher and Paykel 6.5 smart drive washer

My F & Paykel washer did this. There was a baby sock under the wash basin. I called for repairman and he found the problem.

Posted on Jan 11, 2008

IFIXALL
  • 868 Answers

SOURCE: washing machine

motor is starting to wear out ,replace it .

Posted on May 26, 2008

  • 10 Answers

SOURCE: Fisher & Paykel GW612 Top Loading Washing

Hi there
That fault is the pump blocked error (no change in water level).
i have a quick and easy way to solve this problem.

first turn the machine off then tilt the machine back and lean it on something(a chair or wall), look underneath, in the top right hand corner of the plastic outer boul you will see a small pump motor it has a fan on it spin this fan and if it is hard to turn that means there is somthing stuck in the drain pump keep turning the fan and try to free whatever is stuck in the pump, then try the machine on spin again all goin well the object in the pump should come out with the drain water(doing this will not harm the machine) if the object is still stuck you will need to get the water out of the machine (bailing or siphioning will work) and tilt the machine back again and take the wires off the pump and there should be a white tab on the boul holding the pump on pull this tab and twist the pump anticlockwise about a quarter turn(you will need a few towels or a boul or bucket to catch the water) and it should come off exposing the blockage.
Hope this solves your Problem.

Nick

Posted on Aug 03, 2009

  • 1 Answer

SOURCE: Fisher & Paykel smart drive 708 filter

my machine swiches on but wont let it fill with water.
Any ideas?
adrian

Posted on Apr 18, 2010

  • 713 Answers

SOURCE: machine stops when gets to the spin cycle- last

Hi just read your posting.Is the machine draining any of the water?If it is not draining then bail some of the water out with a small bucket or pot, just enough so you can look under the machine without it leaking everywhere.Now when you are looking under the machine look to the front right and you will see a red or black fan.This is your pump.Turn the fan clockwise and anticlockwise a few times to loosen it if it is jammed.The fan should turn freely.If the pump turns freely then put the machine back on its feet and select a spin cycle and push start.The machine should now drain the water and then it will spin.Please reply on how you got on or if the machine still does not drain.Looking forward to your reply.

Posted on Jul 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can't secure agitator wingnut on 7.5kg Fisher & Paykel top loader.


try rotating the agitator some and see if it drops into place on the shaft .

Oct 26, 2015 | Fisher and Paykel Washing Machines

2 Answers

My fisher & paykel 7.5 kg excellence smart drive doesn't spin


Check the out of balance switch (under the larger Grey board)
for corrosion on the terminals and replace if faulty.

9f16c24b-b2e5-47c5-96e4-cee2ec2bf2e0.jpg

Jul 03, 2012 | Fisher and Paykel Washing Machines

1 Answer

Fisher & Paykel washing machine excellence 6.5 smartdrive 8


see this possible causes: God bless you
see the diagrams
Lid switch
test for defective or open
Motor coupler
replace coupler motor for defective
Belts
worn belt
Clutch
wears replacement
Drive motor
one winding burn , run with one winding in one direction and another with the other winding.
Drive pulleys
frozen pulley, worn.
Transmission
broken gear+ shifter defective
Agitator
worn agitator replace

5_16_2012_7_59_29_pm.gif5_16_2012_7_59_43_pm.gif5_16_2012_7_59_54_pm.gif5_16_2012_8_00_26_pm.gif

May 16, 2012 | Fisher and Paykel Washing Machines

2 Answers

Something is stuck underneath the agitator in m Fisher & Paykal Aquasmart. How do I remove the agitator?


Hi - with aquasmarts there is a plastic dome like fitting in the middle of the agitator & unscrew this to remove the unit.

Jul 08, 2011 | Fisher and Paykel WL37T26D Top Load Washer

1 Answer

Fisher Paykel washing machine Smartdrive 703 Advance, Power and Start buttons are non responsive when pushed. Is there a part that can fix this. Does the control panel have to be replaced?


Fisher & Paykel Smart Drive beeps and stops during rinse cycle. If I hit pause and wait and restart it eventually continues. It seems like it has problems detecting water level.

Apr 13, 2011 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Fisher & paykel 501 smart drive washing machine


It does not seem like a problem of the unit. It might be a loose connection of supply code. Keep the supply code pressed to the unit in different directions and see if the unit takes power. If so, replace the supply code. It's not that expensive.

Jul 05, 2010 | Washing Machines

1 Answer

How do you remove inner tub to get to the outer tub of Fisher & Paykel gwl11


You need 2 people for this.. Unscrew plastic wingnut down the centre of the agitator.(2) undo 2 phillips head screws under little rubber covers just under lid at front top edge.(3)lift top of machine like a car bonnet,get someone to hold it up for you.(4)Unclip big round plastic ring on top of the bowl,you may find its attached with a spring at the front left hand corner,just lay the plastic ring over front of machine & let it hang.The bowl should just lift straight out.Be carefull,the outside of the metal bowl is like a cheese greater trust me! PS when you put it back together & you lower the top of the machine(make sure that little white plastic lever hanging down) the right hand rear go's outside the righthand rear of the tub NOT squashed on top.Its an out of balance lever & it needs to dangle outside of the bowl/tub right rear.GOOD LUCK!

May 27, 2010 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Washing machine stuck between wash and rinse.


first remove agitator by taking top of agitator off and putting your hand down the centre of it and unscrewing the wingnut holding the agitator to the main drive shaft. once the nut is loose pull the agitator out and bail the water out by hand using a pot or jug. once the bowl is empty u can look underneath. to the right hand side front of machine u will see a red or black fan that is attached to the pump. turn the fan clockwise and then anti clockwise and hopefully that will unjam the pump. the fan should turn freely. then put machine back on its feet.refit agitator. turn on unit select spin and it should start draining.if it doesnt reply back and i will help u more. please turn off power to unit b4 u work on it. good luck

Apr 12, 2010 | Fisher and Paykel GWL11 Top Load Washer

2 Answers

F & P Kelvinator Smart Drive 708 - Faulty power switch and cycles


I have a smart drive 708 that will turn on but won't fill, any suggestions?

May 25, 2009 | Fisher and Paykel Fisher Paykel Intuitive...

2 Answers

Fisher & Pykel Smart Drive 9


Spin the fan on water pump (you can acess with difficulty from bottom of washer) if it has a little sand in it, it may clear. It is possible to remove water pump if mechanically minded and see if something small eg staple or 5c coin is stuck in it if this dosn't work or you may find you need to replace water pump.

Aug 19, 2008 | Fisher and Paykel Fisher & Paykel Washer

Not finding what you are looking for?
Washing Machines Logo

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Owen Barnes

Level 3 Expert

867 Answers

marley mcelhinney

Level 3 Expert

490 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...