Question about Toshiba 40RV52U TV

Open Question

40rv52u toshiba tv's menu keeps coming on

When watching a show, the menu program comes on and starts a channel search. Over and over again, by itself.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 159 Answers

SOURCE: Toshiba TV fails to recognize HDMI input

If the tv does all those symptoms but after some seconds the tv works and stays doing the job. THen the tv has a slow microprocessor to recognice the different resolutions or video inputs.

But if the tv cannot do anything and stay aout of signal forever. send the tv to the waranty. (no waranty? you have to use the component input instead to have digital signal reproduced

Posted on Apr 24, 2009

  • 1274 Answers

SOURCE: How do I add a channel to the toshiba 19hlv87 when

you need to go into menu then setup then auto program

Posted on Feb 14, 2010

budmrtn
  • 11361 Answers

SOURCE: My toshiba problem.

You may have bad T-CON board, try cooling it with small fan blowing on the vents of the TV.
If you are going to DIY and have proper tools and know safety precaution then please read on:
Please see my basic troubleshooting guide here:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

http://s807.photobucket.com/home/budm/allalbums

http://en.wikipedia.org/wiki/Capacitor_plague

Parts: www.shopjimmy.com

Posted on Jun 30, 2010

  • 8909 Answers

SOURCE: We have just received a

Hopefully, if you were to press the menu button and somewhere on the screen will be DTV. Select DTV and then you can run search again.
Hope that makes sense.

Posted on Mar 11, 2011

  • 1 Answer

SOURCE: i bought a TOSHIBA 32KV500B tv. At the Initial

I had this problem and searched the internet for hours looking for an answer and was given the initial same reply as this and it does not work. To solve this problem all you simply need to do is press source button on the controller followed by pressing the DTV/USB option. All your digital channels will come back to you and you will find the menu setup options you are looking for!!!

Posted on Jul 23, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the code for I can no what channel im on and for my letters and numbers to show on my 7"wide screen lcd tv with atsc tuner tv


      Select and highlight INPUT CONFIGURATION and press ENTER. Using the left/right arrow buttons, select Antenna or Cable as desired, then select DONE. Press the CH RTN button to go back to the TERRESTRIAL menu. Select START SCAN to begin the Channel Program.Aug 7, 2013

      How To: TV Auto Program / Channel Scan - TOSHIBA FORUMS

      forums.toshiba.com/t5/Televisions...To-TV...Program-Channel.../345660
    Feedback

    LG LED TV won't show program information or channel name ...

Jan 13, 2016 | Televison & Video

1 Answer

When I use my channel + button my TV returns to channel 2. HELP


It means that you haven't program there channels on your TV. Just about everybody use cable services, which in terms means that those people donut search for TV's channels, they usually have the TV set at HDMI1 or HDMI2. Press menu, under menu strength for channels, from death for new channels. Best time you use the control remote you'll be able to change the channel to other than 2. Good luck.

Jan 31, 2015 | Toshiba Televison & Video

1 Answer

Cleared my TV by mistake know have no channels


Press the menu button and find the auto search programs. wait till the end of searching then you can watch all the channels.

Oct 01, 2014 | Toshiba 36A40 36" TV

1 Answer

Toshiba tv 40rv525u has started to change channels


My TV 40RV525U changing channels, menus itself for few months ( I use antenna).
my son tried to stop the channel scrolling by enter weird number into the channel to stop it scrolling such as 555, 777..
later, it turn on off by itself and unable to hold on a channel
I call Toshiba customer service and they ask money $25 for troubleshooting but I denied since I do not want to waste money and time.

Now, I found how to fix it myself.

In my case, something was wrong with the signal comes from the button control on the left side of the TV.
========================
What I did
========================
unplug the power cord.
Remove back cover.
Look into the motherboard ( biggest green at the center).

First, I disconnect a connector on the motherboard come from the IR board that receive the wireless signal control ( meaning the remote is disable).
I turn on the TV, press on Menu button on the TV side. Menu is still scrolling.

I turn off TV, disconnect power cord and connect the IR connector back to the motherboard.
I then disconnect the nearby connector that comes from the side control buttons.

Turn on the TV by remote, press menu button on the remote to check. The menu stays.

DONE.

I use electric tape to seal off the connector and let it hanging there.
Close the TV back panel

I have been watching TV for 3 nights without menus/channels scrolling.
NO AVAILABLE red message when watching DVD is no longer existed.

Hope this help someone else.

Jan 20, 2012 | Toshiba 40RV525U 40 in. LCD TV

1 Answer

I live in Tahiti and have a coship N6760B digital set top box decoder with sky pacific smart card. I have a 2.3 metre satellite dish with Cband lnbf. From the digital meter point of view I got a really...


Jason478. I would be surprised you are picking up the signal from the Spot beam which Sky Pacific uses. I do not believe even the spill is reaching Hawaii. Best to get a refund of your money as you will definitely loose the signal when the replacement satellite kicks in on Dec 2011. Be careful of the Sales people in Sky Pacific. http://www.intelsat.com/flash/coverage-maps/sat_foot.html?sat=IS-701%20at%20180%BA%20E&display=map&spot=0

Jun 25, 2011 | Coship CDVB2000E

1 Answer

Hi my web cam is not working any more. i have searched for it but it is not there. i have toshiba satellite a300 and i need my web cam back :(


Hi

maybe this will help its worth a try

go to Start
Run
type in MSCONFIG
go to the start up Tab and the services tab.
tick the camera program
then select apply
system will reboot
then windows will open saying you made changes to the startup menu
tick the bottom left where it say's don't show again
hopeefully you will now have your webcam in the start menu again

if not go to

www.toshiba.com

go to support/downloads
find your model and operating system
search for the webcam driver
download it
install it
then restart laptop

hopefully all will be good

if not please come back to us again

many thanks

Jun 21, 2011 | Toshiba Computers & Internet

2 Answers

I bought a TOSHIBA 32KV500B tv. At the Initial Installation mistakenly I selected "yes" for 'do you want to search analogue channels?' guestion. And then I lost all my automatically selected...


I had this problem and searched the internet for hours looking for an answer and was given the initial same reply as this and it does not work. To solve this problem all you simply need to do is press source button on the controller followed by pressing the DTV/USB option. All your digital channels will come back to you and you will find the menu setup options you are looking for!!!

Feb 12, 2011 | Toshiba Televison & Video

1 Answer

I cant program any channels on my tv. Toshiba 42'' plasma. Do i need the remote or can i do it directly from the tv?


Which specific model from Toshiba do you have? There are several 42" TVs released with the Regza name. Most of the manuals can be found on the Toshiba support web site. http://www.tacp.toshiba.com/customersupport/

The one that I have allows for the channels to be set from the On-Screen Menu. In the TV mode, press Menu (there is a Menu button on the side of the TV). Navigate with the arrow keys (CH+, CH-, Vol+, Vol-) to the Setup menu and highlight Installation and press Enter (the Menu button is also the Enter key when using the buttons on the TV). Then highlight Channel Program and then Start and press Enter. When the search is done, press Ch+ or Ch- to view a station. To add or delete channels, use the Channel Add/Delete that is one line below Channel Program. Use the enter key to change the check mark status next to a channel. If adding a digital sub-channel not previously found, enter the number manually on the remote using the 100 key to add the dash. If the channel isn't found, an error message will result.

I hope this helps.

Cindy Wells

Jul 28, 2010 | Toshiba REGZA 42 in. Flat-Panel LCD HDTV

1 Answer

Digital TV Converter Box


I have a Panasonic TV with built-in VCR, I had Comcast put in a converter box and was given instructions on how to set up the system to record my wife's programs, I had to select the program (in advance of scheduled time) to be recorded through the TV & converter box to the VCR. Next styep- select "Show" and I received a menu the first of which was "R" I clicked the "R" and a menu for selecting Repeat record start/stop times appeared Click OK and was then directed to to set up the VCR according to Panasonic VCR instructions. Worked for a day then the "R" menu on the converter box disappeared. Both the VCR and TV had to be set to Ch 3 to get it to work, But that's history. When it quit working ("R" menu), I had Comcast come get their box . PS The tech who showed up to pick up the converter box knew nothing about any "R" (record) menus except on the most ecpensive converter box. That cinched my decision, Oh Wel!. Sign me Tom with less trash to watch.

Jul 29, 2008 | Toshiba MV19N2 19 in. TV/VCR Combo

Not finding what you are looking for?
Toshiba 40RV52U TV Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74106 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...