Question about Canon i9100 InkJet Photo Printer
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Canon i9100
ahh that lights might signifies that some consumable parts of the printer is near end of life like the service station or the waste tank. i suggest that you should download a resetter for that model of printer you have.
Posted on Sep 20, 2007
The POWER Lamp Flashes Orange
Eight flashes: Waste ink tank almost full
The printer has a built-in waste ink tank for the ink used during print head cleaning. Eight flashes indicates that the waste ink tank is nearly full. Press the RESUME/CANCEL button to cancel the error so you can continue printing. Before the waste ink tank becomes completely full, contact a Canon service representative.
Canon recommends that you call for service as soon as this error occurs. Once the waste ink tank becomes completely full, printing will no longer be possible.
Posted on Sep 14, 2009
1. Press power button while plug in the power cord – green lamp.
2. While hold the power button press resume button twice – orange blink and return to green.
3. Release the power button, Then the PC will recognize new printer install.
4. You need the software for permanent reset.
5. Run the software and select printer port.
6. Then select Set Destination
7. Click MAIN and PLATEN button to reset waste ink counter to zero.
8. Finally test print by click TEST PATTERN button.
Posted on Oct 19, 2009
According to the manual found here:
7 orange lights represents a bad print head, and the printer will need serviced or replacement. Since printers are so cheap lately, I would just go shopping. Hope this helps! Thanks!
Posted on Oct 21, 2009
It's mean "Print head not installed/Defective print head".First open cover and remove the ink cartridges.Then open holder and remove the print head.Clean the contacts on printer and print head using piece of cotton and some alcohol.Then put back all again.If the problem persist you need to replace the print head.It's part number now is QY6-0064, because the old QY6-0042 is discontinued.
Posted on Oct 30, 2009
Tips for a great answer:
Aug 14, 2012 | Canon BubbleJet i9950 InkJet Photo Printer
Nov 12, 2010 | Office Equipment & Supplies
Feb 02, 2010 | Canon i9100 InkJet Photo Printer
Jan 27, 2010 | Canon BubbleJet i560 InkJet Printer
Jan 02, 2010 | Canon BubbleJet i9950 InkJet Photo Printer
Oct 21, 2009 | Canon BJC S300 InkJet Printer
Jan 13, 2009 | Canon i950 InkJet Photo Printer
Oct 04, 2008 | Canon BubbleJet i560 InkJet Printer
Jan 24, 2008 | Canon i9100 InkJet Photo Printer
231 people viewed this question
Usually answered in minutes!