Question about SanDisk Sansa e250 MP3 Player

1 Answer

I can't do anything

I plugged it into the computer and it turned on but it wasn't detected, then the screen faded to a white color but you could still make out what it said. I tried to turn it off but it can't turn off, so I can't even get to the recovery mode. None of the buttons work and now the screen is white with blue lines down it. I don't know what to do so can someone please help me?

Posted by on

  • Raven Cote Jun 11, 2007

    I figured it out, It wouldn't turn off so I left it on all night. The battery then died over night. In the morning I tried turning it on but it was dead, so I plugged it in the computer and it works now. so it this happens to you wait until it turns off and just charge it, then it should be fine.



1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi mate, this might not solve your problem but i do know that this model can be hard-reset by holding the power button down for 15 seconds. its worth a try! cheers joe

Posted on Jun 11, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Tv powers on, see three birds in color then flickers and fades to white

The problem must be with its main digital processor board. It will be best to make it confirm. Contact any service technician. Try this link. There are more than two thousand and four hundred posts. All are related to television and other domestic electronic equipment service help.

May 20, 2013 | ViewSonic N1930W 19 in. LCD TV

1 Answer

Red lines on Samsung UN46B7100. Is this the TCON board or the panel?

Have you checked all cables first? Color fluctuations and problems of this nature can be caused by a bad VGA/HDMI/Component cable. Try plugging your source device into other inputs and see if you get the same result. If that happens you more than likely have a bad video card.

Aug 31, 2012 | Samsung UN46B7100 45.9 in. LCD TV

1 Answer

My LCDTV has a problem, Model number is 6626LCT, Now on to the problem, While doing yearly cleaning on my tv as normal, after i plugged it in it was normal for 40 seconds, It flickered and the screen went...

Only suggestion is if set was plugged in when you did what you did--unplug it and any box or receiver plugged in and wait a while--plug back and let the equipment try to reboot.

Jun 06, 2012 | Sylvania Televison & Video

1 Answer

Lg flatron w1943tb color fades in and out to a blue green

Follow the following solutions, this should fix up your trouble
1. Turn yourmonitor on. It should be on for at least 20 minutes before you continue.
2.Press the"Auto/Select" button on the front of your computer's monitor. Thescreen will be wavy while the adjustment happens. When the screen stops beingwavy, the faded colors should no longer be visible.
Follow steps 1 and 2 if you do not have a disk for the monitor.

Nov 24, 2011 | LG Computers & Internet

1 Answer

My ViewSonic monitor is having an issue with blurring lines. Anything on the left or middle of the screen blurs to the right in a faded color, extremely noticable when I open MS Paint and fill the left...

This is a tipical flyback defect circuit, the lines can 1st appear on top/bottom of screen, then can increase to center. Send monitor to repair center, for check and repair. You can test with a tv test signal.

Dec 11, 2009 | Computers & Internet

1 Answer

Bizzare problem with the color

Sounds like something may be wrong with your cable line might need to have it checked.

Aug 19, 2009 | Sony KV-32FS13 TV

1 Answer

My sansa turns on but dissapears and comes back again

does this device gets detected by the computer? if yes then do a formware upgrade. this is due to firmware problem.

Jul 27, 2009 | SanDisk Sansa e250 MP3 Player

Not finding what you are looking for?
SanDisk Sansa e250 MP3 Player Logo

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top SanDisk Audio Players & Recorders Experts


Level 3 Expert

102366 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Gyula Lacz

Level 3 Expert

484 Answers

Are you a SanDisk Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides