Question about Uniden Cordless Phone EXAI985
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
This is because of the following reasons
1.The handset is far away from the base unit.Try to bring the hand set near the base unit and try.
2.The base unit is not plugged in to the power supply.Please check it.
Posted on Jul 27, 2010
I had a similar problem which I finally fixed. You did not say if any of your phones registered.
First try the following recommended by Uniden Support:
Your phone(s) should be fully charged before putting them on the main base.
Unplug the battery from the phone by removing the battery cover and removing the connector. Then, push the # and * key together and hold while you plug the battery back in (requires some dexterity). Continue to hold the two keys until you hear a confirmation tone. This will force the phone to reregister. Put the phone on the main base (if you are sure it has a fully charged battery) and see if it will reregister it to solve the problem.
That did not work for me. So, I followed the instructions to de-register the handset (even though it hadn't really registered). But, I also pretended like the Base was not available (because using the base in this step also failed).
1) Press and hold the hang up and # keys for at least 5 seconds.
2) Move the cursor to select Base Unavailable and then press Select.
3) Select the base you want to deregister from, press Select and then move the cursor to Yes and select.
This causes the phone to delete any of its base information.
At this point, again insure that your phone shows the battery is fully charged and if it is not, put it on the stand alone charger base (not the main base). With the battery fully charged, place it on the base and try registering again by placing it in the main base.
If neither of these approaches help, contact support at Uniden.com.
However, my problems were cleared when I cleared the handset with the second set of instructions.
Posted on Apr 26, 2009
30 seconds with a search engine got this page http://www.uniden.com/index/manuals_results.cfm?cat=59
Put in your model number and you're good to go.
Posted on Aug 27, 2008
Tips for a great answer:
May 10, 2015 | Uniden D1484-4 Dect Cordless Phone With...
Feb 22, 2015 | Uniden Dect2188-3 Dect 6.0 Cord/cordless...
Jun 16, 2014 | Uniden DECT 6.0 Cordless Telephone...
Jan 11, 2013 | Generic Uniden BT1021 Cordless Phone...
Jan 11, 2013 | Uniden DECT 6.0 Cordless Phone ID
Feb 29, 2012 | Uniden Cordless Phone
Feb 17, 2012 | Uniden D1680 Cordless Phone
Jun 24, 2010 | Uniden DECT15805 Cordless Phone
Apr 16, 2009 | Uniden 5.8GHz Expandable Cordless Phone...
3,235 people viewed this question
Usually answered in minutes!