a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need. goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The eye maybe out of alignment. First try this. Turn ON your PS3. Go into the menu with all the scrolling menus Go into system settings and make sure auto-play is on. Press
the PS button on your controller until you see the stand-by type menu.
The screen has a dark filter on it and it should say "TURN OFF
CONTROLLER, TURN OFF SYSTEM Insert disc
How to jailbreak PS3(PlayStation 3)? chips available at www.ndsireland.webs.com
Follow the complete step by step guide posted below to jailbreak your PlayStation 3 to enable you to create backups of original discs. Pre-requisites are as follows: * Any (FAT or SLIM) PlayStation 3 Console running firmware 3.41 or above. * PS Jailbreak USB Modchip. * An external USB drive formatted to FAT32 with the "Backup Manager" file on it which you can download from here. * Original disc of any PS3 game which you want to backup. Step 1: Power off your console and make sure that there isn't any disc in the Blu-ray drive. For the SLIM Model: Remove the power chord before plugging in the USB. For the FAT model: Turn off the power switch found at the backside of the console.
Step 2: Now insert the USB based PS Jailbreak Modchip to any USB port of your choice on the console. Once the USB is in place, Power ON the console and immediately press the "Eject" button. There should now be two LEDs turned-on on the USB as the console is loading. If the LED light on the USB turns green, you are good to go as the PS Jailbreak has been successfully loaded. If the LED turns red, then it means that the PS Jailbreak Modchip didn't load successfully. This usually happens when the Power and Eject button sequence wasn't performed properly. Start from Step 1 again if you end up having the red light. Step 3: Once the console has finished booting up with the PS Jailbreak Modchip, plug-in the external USB storage device which has the "Backup Manager" setup to the console's USB port. Step 4: Now navigate to the "Game Menu" and select the option "Install Package Files" and then select "manager.pkg" file. This will basically install the "Backup Manager" application that you download earlier to your hard drive. Step 5: When the "manager.pkg" file is done loading, scroll all the way down in the "Game Menu" and there you should see a new application called "Backup Manager", run it. Step 6: Now we're in the Backup Manager app. Insert the game in the console's optical drive which you want to backup. Press "O" and you will be asked where to make the backup, on the internal HDD or the external storage source connected via USB. This process is further elaborated by the following screenshots. Step 7: In order to play a game via the backup you just made, insert any original game disc into your console (To emulate the loading process), run "Backup Manager" in the "Game Menu". Press "X" to play the selected backup game. Step 8: Now you will be taken back to the main menu. In the "Game Menu" you will see the game which you have backed up. Now you can select the game, and run it without having the disc in the console's drive. Oh and you must make sure that the PS Jailbreak USB Modchip is connected to your console at all the times when you are playing the games via backups. Disclaimer: This guide is for educational purposes only. I'm not responsible for any loss of important data or malfunctioning of your Game Console.
I had a similar problem. My PS3 did not load the disk based games.
Those disk based games were not visible in the game menu.
I did not
have problems with the normal movie DVDs or Movie Blu Rays. Those were
working fine. Also downloaded games were working ok.
In case you have the similar problem, you should try the following steps;
The PS3 has a special Recovery Menu, which you can access in the following way;:
1. Turn off Playstation 3. 2. Hold the power button down; the system will turn on and turn off once again. 3. Once the System has been shutdown, re-press you finger until you hear 2 consecutive beeps 4. When you hear the 2 beeps take finger off power button. 5. You will be prompted to plug in your controller via USB and then hit the PS button 6. The Recovery menu will pop up.
The current Recovery Menu supports:
• Restart System: Restarts the PLAYSTATION 3 System.
• Restore Default Settings: Reset all system settings back to default.
• Restore File System: Checks for corrupt/missing system files.
• Rebuild Database: Rebuilds the OS for the PLAYSTATION 3.
• Restore PS3 System: Fresh restore; Deletes everything and starts from Scratch.
• System Update: Update the PLAYSTATION 3 System
Select option "Rebuild Database".
PS3 has executed the DB rebuilding operation, the disc games will be
visible again in the menu and are starting automatically when inserted
This is a common problem which is usually fixed by following these steps. Turn ON your PS3. Go into the menu with all the scrolling menus Go into system settings and make sure auto-play is on. Press the PS button on your controller until you see the stand-by type menu. The screen has a dark filter on it and it should say "TURN OFF CONTROLLER, TURN OFF SYSTEM" Insert disc
1) Turn on machine
2) Open Tray
3) With tray still open hold the reset until the tray closes.
4) Tap the reset once.
if there is a format disc error, it says "Please insert a Playstation
or Playstation 2 format disc." It is accompanied by a sound similar to
the browser, but with a more tense noise. This is caused by a disc
being so badly scratched that it completely fails to recognise the
format, or if there is a problem with the laser.
Auto-Diagnosis (PlayStation 2 system)1. Turn on the system without a disc inside.2. Once at the Main Menu, press the triangle button to enter the Version Information Screen.3. Highlight the "Console" option, and then press the triangle button again.4. Next, press the X button, highlight "On", and then press the X button once more.5. Now press the circle button twice to return to the Main Menu.6. Press the eject button on the front of the console, and insert a disc.7. Now close the disc tray, but DO NOT reset the system.8. Highlight the Browser option from the Main Menu, and then press the X button.9.
In the Browser, an icon of the disc should appear on the screen.
Highlight this icon, and then press the X button to read the disc.10. If the auto-diagnosis is successful, the disc should load properly at this point.NOTE: The auto-diagnosis feature will return to "Off" the next time a disc is inserted.