Question about Hotpoint Repair Pcb / Module Wm72 ultima 1200

Open Question

What does A8 code mean on Hotpoint Ultima dishwasher?

Error code A8

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: hotpoint fdw20p dishwasher

You need the control panel to reset before anything else can happen. To do this TURN OFF THE PLUG SOCKET FIRST AND UNPLUG. Then you need to drain ALL the water from the machine. Turn off the water supply feed and place the wastage pipe as low to the floor as poss ( 1-2" off floor). Water will gush out so use a large shallow tray and keep emptying the tray. Tilt the dishwasher over slightly to make sure all the water is out.
This will allow the control panel to reset itself which wouldn't normally happen if the base of the dishwasher was holding even a small amount of water.
Re connect the water, plug back in , select the RESET setting on the dial and close the door and switch on.
Leave for about 20 seconds and then turn off.
Rotate the selector switch to "A" Intensive wash and switch
I found this on another site and it really did work for me

Posted on Feb 23, 2008

  • 1 Answer

SOURCE: Hotpoint FDW 85 Dishwasher

You just need to switch the machine off for approx 30 seconds from the mains and switch it back on again!!

AL99 means that there is a communication error within the machines software.

Posted on Jun 16, 2008

  • 93 Answers

SOURCE: what does code al99 mean

AL99 is a communications error.
check PCB(s) cabling, connectors .

Posted on Jul 28, 2008

  • 1 Answer

SOURCE: Hotpoint Ultima dishwasher dwf70

hotpoint dwf 70 start the machine 2 minuites later stops light comes on al05 appeers water starts to leek out.

Posted on Oct 13, 2008

  • 1 Answer

SOURCE: Hotpoint Ultima BF71 Dishwasher 'F' code

clean out all the filters at the bottom of the dishwasher thorouly and the saltcontainer as well.
the f code is for filters.

Posted on Jul 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ihave a hotpoint SDD910 dishwasher. showing error A8 sometimes a10. any help please


Hello Jack Poole,

What I'm getting (here in USA) seems to indicate a UK
appliance ... Really does not matter... The base principles remain the same just the "PARTS" search turns into a "SPARES" search.

Your unit is complaining about the heater element not functioning... which could be the heater or the logic which drives it... and EVERY CONNECTION in between.

Look on your schematic for your heater and logic board
part numbers... and search for those... HOPEFULLY you will also find "helpful videos" from the VENDORS...

The ones on youtube .. VARY WILDLY (from planet to planet).

Hope this helps.

https://www.bing.com/search?q=SDD910+dishwasher.+showing+error+A8+sometimes+a10&FORM=EDGNNC&PC=DCTE

http://parts.hotpoint.co.uk/shop

Hotpoint SDD910 Hoses

http://www.ukwhitegoods.co.uk/forumsphpbb3/hotpoint-fdf780-error-t79703.html

Nov 20, 2016 | Hotpoint Dishwashers

1 Answer

Error code A8 appears on my hotpoint Dishwasher


Hello,
On my sheet of error codes i dont see a A8 for Ge/Hotpoint dishwasher(ge makes the hotpoint brand) i do see a C8 which i assume is the same thing and that says the detergent cup was blocked and couldn't properly open

Aug 13, 2011 | Dishwashers

2 Answers

F 05


Hello,F05 means that the pump is not getting rid of the water.
You to locate and clean the filter, and or check the pump for a blockage or restriction.

Thanks

May 23, 2010 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

My Hotpoint Ultima super silent is occasionally showing the warning sign F11. Can you tell me what this sign means?


F11 means the pump cannot be activated.You may have a loose conection or faulty pump. For Hotpoint error codes go to http://www.selfix-uk.co.uk

Jul 08, 2009 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Hotpoint WF860 Washing Machine displaying error F-65


there is no F65, perhaps it's F05 which means it will not empty water (not oumping out). Should av gone to specsavers !

Apr 12, 2009 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Error message f-01 on hotpoint ultima wt741 washing machine


F01 is a motor faulty normally caused by the module,but sometimes thewiring to the motor plug that works loose as its to tight,give them alla good wiggle make sure there all in!
check this link for other error codes of hotpoint machines
http://www.hotpointservice.co.uk/hs/pages/content.do?keys=FAQ:ERROR_CODES

Dec 15, 2008 | Hotpoint Ultima WD72 Front Load...

1 Answer

Hotpoint Ultima BF71 Dishwasher 'F' code


clean out all the filters at the bottom of the dishwasher thorouly and the saltcontainer as well.
the f code is for filters.

Nov 16, 2008 | Hotpoint 24 in. BF72 Built-in Dishwasher

1 Answer

What does code al99 mean on hotpoint ultima dishwasher


AL99 is a communications error.
check PCB(s) cabling, connectors .

Jul 27, 2008 | Hotpoint Dishwashers

1 Answer

HOTPOINT ULTIMA 1200 WM72 Error Code


f30 code means there is a problem within the motor curcuit,check connections at the motor and check motor brushes are not worn.

May 05, 2008 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Alarm Code 10 - Meaning Please?


You can download the manual from this link

http://imagebank.indesitcompany.co.uk/brochures_online/pdf/Hotpoint/Laundry/HB00503_WF840_860_865_19504206802_jan05.pdf

You will need to contact the service helpline for the explanantion of the F10 display

Dec 30, 2007 | Hotpoint Ultima WF860 Front Load Washer

Not finding what you are looking for?
Hotpoint Repair Pcb / Module Wm72 ultima 1200 Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Dishwashers Experts

AcmeUK

Level 1 Expert

25 Answers

yadayada
yadayada

Level 3 Expert

75744 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Hotpoint Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...