Question about Ezonics EZCam Webcam

1 Answer

PROBLEM TO INSTAL DRIVER TO WEBCAM

AI NIDE INSTAL DIVER TO EZONIC III

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Normal 0 Did you install the software with the camera connected to the computer? Disconnect the camera from the USB port and reinstall the software. When the program asks you to connect the camera, do so, and it should work. Hope this is of some help. Bud

Below is info for setting up Audio & Video to chat on line after you install , either Skype or a messenger program.


Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:

After downloading and installing Skype set it up as follows:

  1. Go to TOOLS, then OPTIONS, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if installed properly will come up and show a picture.
  4. Then on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now see and talk to you.

B. Yahoo Setup:

After downloading and installing Yahoo Messenger set it up as follows:

  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.

C. Windows Live Messenger:

  1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
  2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
  3. Next go to the Menu Bar on right side, click on “ “Action.”
  4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: You audio and video shoud work. Enjoy.

When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

Posted on Jan 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have losed my ezonic webcam cd.how will i be able to install without a cd


The EZonic Web Camera people should not be manufacturing or selling their Web Camera's if they won't provide the Web Camera drivers free. Instead people who have purchased the EZonic Web Camera's have to pay
for them.
My suggestion to those who have purchased an Ezonic Web Camera is to ditch it and get it from Microsoft
or Logitech who provide support and driver availablity. That goes for Sony and a nmber of other manufactures.

Copy one of the sites below and paste it into your ADDRESS BAR and hit ENTER to check out how easy it is
to get the drivers you need to support the Windows operating system (ie. XP, Vista, & Windows 7).

Microdoft Site:

http://www.microsoft.com/hardware/download/download.aspx?category=ICEbd

Logitech Site:

http://www.logitech.com/index.cfm/405/&cl=us,en?prodcrid=405

My recommendation: Why pay for the drivers, you'd be money ahead to purchase one of these cameras.

Hope this is of some help and is not only my opinion but plenty of other Technicians. Bud

May 19, 2010 | Ezonics EZCam Webcam

1 Answer

EZCam III Personal Web Camera: i lost my cd and i want to instal with no cd...


1st You download Webcam Driver.
EZCam III Personal Web Camera
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

May 16, 2010 | Ezonics EZCam III Webcam

1 Answer

I badly need a drive for installing Vebcam Ezonic S120H.Would U please help me how to get it on screen


1st You download Webcam Driver. Ezonics Webcam Driver After this install the webcam driver in the system.
Installation of Webcam Driver
  • Go to the control panel
  • Click on the System Icon
  • Click on the Hardware Tab
  • Click on the Device Manager then
  • Select the Unknown Device where yellow Question Marks sign on it.
  • Right click on it and uninstall it.
  • After this go to the top of the device manager and click on scan for hardware changes.
  • Driver installation Wizard start.
  • Brows Your Driver from the Hard Disk and click on next.
  • Driver will be instal

Dec 25, 2009 | Ezonics EZCam Webcam

1 Answer

My DVD ROM doesn't recognizes my ezonic webcam


you could try to download the drivers from ezonics website.

Sep 12, 2009 | Ezonics EZCam III Webcam

1 Answer

My ezonic web cam when running, video screen is green. Help!!!!


Try to reinstall the driver. This usually happens with Ezonic webcams.

Jul 16, 2009 | Ezonics EZCam III Webcam

1 Answer

Lost disk ez cam 11


1st You download Webcam Driver. Ezonic Driver After this install the webcam driver in the system.
Installation of Webcam Driver
  • Go to the control panel
  • Click on the System Icon
  • Click on the Hardware Tab
  • Click on the Device Manager then
  • Select the Unknown Device where yellow Question Marks sign on it.
  • Right click on it and uninstall it.
  • After this go to the top of the device manager and click on scan for hardware changes.
  • Driver installation Wizard start.
  • Brows Your Driver from the Hard Disk and click on next.
  • Driver will be install.

Dec 26, 2008 | Ezonics EZCam III Webcam

1 Answer

Ezonic


i need softeare of installationship ezonics webcam III Ez-307 SPCA561A

Aug 11, 2008 | Ezonics EZCam Webcam

1 Answer

Need a driver for my ezcam to work wir xp


1st You download Webcam Driver. Ezonic Cam After this install the webcam driver in the system.
Installation of Webcam Driver
  1. Go to the control panel
  2. Click on the System Icon
  3. Click on the Hardware Tab
  4. Click on the Device Manager then
  5. Select the Unknown Device where yellow Question Marks sign on it.
  6. Right click on it and uninstall it.
  7. After this go to the top of the device manager and click on scan for hardware changes.
  8. Driver installation Wizard start.
  9. Brows Your Driver from the Hard Disk and click on next.
  10. Driver will be install.

Apr 03, 2008 | Ezonics EZCam III Webcam

Not finding what you are looking for?
Ezonics EZCam Webcam Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ezonics Webcams Experts

micky dee

Level 3 Expert

2624 Answers

Teet Bergmann

Level 3 Expert

565 Answers

Shahzad  Waseem...
Shahzad Waseem...

Level 3 Expert

746 Answers

Are you an Ezonics Webcam Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...