Question about Yahoo Diamond Vision DVDC803-04 DVD Player

1 Answer

Code for universal remote

Me again, The model number for the Diamond Vision I have is DVDV807-04. Does anyone have a code and instructions as to have my player controlled from a rogers remote? Thanks to anyone that can help.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 934 Answers

This must be a duplicate post. And because I'm not sure which one you'll check I'll just post the answer here too... Diamond vision is a little pickey with handing out their code access. And Rogers doesn't have a whole lot about accessing components like DVD players. But try this: 1. Turn on DVD player 2. Press the AUX button at the top of the remote 3. Press and hold the SETUP button until the LED light blinks twice. 4. Press 9-1-1 in sequence, the LED will blink twice again. 5.Aim the remote at the DVD player and slowly alternate pressing POWER and AUX. Stop when DVD turns off. 6. Press SETUP to lock the code in memory. It may take several minutes of alternating between POWER and AUX to find the appropriate code - be patient... If after ten minutes you haven't got it try programming it as a VCR - steps 1 through 6 above and substitute VCR for AUX.. Good Luck Bill

Posted on Jun 11, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sanyo tv,RCA universal remote,Diamond Vision player--compatible?


Sorry it took so long to respond to your request for assistance. You can find the instructions and codes you need to program your television at the RCA customer support website [http://www.rcaaccessories.com/rcaaccessories/ ] Copy this web address and paste it into the address bar of your web browser. This will take you to the RCA main customer support page. Just go to the universal remote control section and find your model remote control. Use the model number to find the technical support information page. On this page will be a copy of the owners manual and the remote control codes to use with your products. I hope this information helps you with your problem of needing instructions and codes to use your remote with your products. Thank you for using FixYa and have a nice day!

Jan 12, 2009 | RCA 3-Device Universal Remote with...

1 Answer

WRONG DISK


get a refund. This fault is a can of worms mate. A road you do not want to go down

Dec 24, 2008 | Yahoo Diamond Vision DVDC803-04 DVD Player

1 Answer

DVDV809-04


You need to convert your machine to an all-region player. The following hack works for Diamond Vision models 803 and 807 - there's a good chance it will work for the 809 provided they've used the same firmware for this model.

The region-free hack works as follows:

1.) Turn on the power and wait until the 'NO DISC' message appears, then press OPEN/CLOSE on the unit itself to open the door of the DVD player

2.) On the remote control, press SETUP. A menu will appear onscreen.

3.) Enter the following number sequence via remote: 1 3 8 9

4.) A different menu will appear. Your cursor should now be sitting in a box with the current region displayed. Use the UP and DOWN arrow keys on the remote control to display a specific region's numerical code, or select '0' (this is the number zero - not the letter o ... this is the region-free setting).

5.) Press ENTER and then SETUP to exit.

6.) Your DVD player will now play DVDs from all other regions. The code only has to be entered once. Powering down will not cause the Diamond Vision to lose its region-free setting. An added plus: it automatically senses PAL/NTSC signals but it will output to an NTSC tv set.

Sep 02, 2008 | Yahoo Diamond Vision DVDC803-04 DVD Player

1 Answer

Diamond Vision DVD Player 803-04


call number of back of manuel and they can sent you one for 12. If you need number you can message me or look it up,

Jul 06, 2008 | Yahoo Diamond Vision DVDC803-04 DVD Player

1 Answer

Diamond Vision Progressive Scan DVD Player


The only Diamond Vision Codes I can find are these.
Hope one works for you.

0622, 0496, 0810

Have a nice day!

Feb 24, 2008 | Televison & Video

2 Answers

Code for remote / Diamond Vision DVD Player model: DVD807-04


I found the code! It is 0736. The company is now called AudioLogic.

Jun 10, 2007 | Yahoo Diamond Vision DVDC803-04 DVD Player

Not finding what you are looking for?
Yahoo Diamond Vision DVDC803-04 DVD Player Logo

505 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yahoo Televison & Video Experts

Craig Butler
Craig Butler

Level 3 Expert

1723 Answers

richie46

Level 3 Expert

12962 Answers

Ernest
Ernest

Level 3 Expert

304 Answers

Are you a Yahoo Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...