Question about NEC MultiSync MT1050 Multimedia Projector

Open Question

NEC MultiSync MT1040 projector, Color Alignment

Dear HDTV Guru,

someone recently asked you how to align the colors on
his projector, you responded:

I can assist you with that if you want. It is very tedious, but can be done. You need a cross hatch pattern generator or something with vertical and horizontal lines to lineup the LCD Panels again. Tricky little procedure if your not familiar with it. Let me know if i can assist you and hopefully save you agravation at the same time. Thanks Jay

I would greatly appreciate a detailed, step by step solution to this person's problem. (misaligned color in a NEC MultiSync MT1040, possibly requiring manual realignment of the screws)

please email me at daniel.fullwood@gmail.com

Thank You

Posted by on

4 Suggested Answers

HDTV GURU
  • 261 Answers

SOURCE: Alignment (convergence) of color panels MT1050

I can assist you with that if you want. It is very tedious, but can be done. You need a cross hatch pattern generator or something with vertical and horizontal lines to lineup the LCD Panels again. Tricky little procedure if your not familiar with it. Let me know if i can assist you and hopefully save you agravation at the same time. Thanks Jay

Posted on Jan 31, 2008

vicer
  • 32 Answers

SOURCE: NEC MT800 Projector with Vertical Lines in picture

try cleaning the filter on the bottom of the unit, might be overheating issue

Posted on Mar 16, 2008

Marrie
  • 563 Answers

SOURCE: NEC VT 460 LCD Panels & Fly Eye Lens

HI there

Firstly this ghosting image will NEVER be caused by your LCD's , so do not take them out.

Have you tried using a different cable ?

If you have and the problem still occurs , you will have to look at replacing the Mainboard.

Posted on Apr 15, 2008

sam_ajayi
  • 74 Answers

SOURCE: Need Help! Have a NEC VT660 projector that is

check the cable connetor

Posted on Nov 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Alignment on the MT1050


You need to take it to a NEC service center or a local professional to get the lcds alinged again.

Jul 18, 2008 | NEC MultiSync MT1050 Multimedia Projector

1 Answer

Red color seperating


If you mean the red light is displaying offset from the blue and green then the red LCD panel inside the projector needs to be physically adjusted. If you take the projector apart you'll notice that the light source is split into red, green and blue light by passing through an optical splitter. Each color then passes through it's own LCD panel. Next, each color is joined back together by another light splitter to be projected to your screen. The red LCD panel is misaligned.

Jun 03, 2012 | NEC MultiSync MT1050 Multimedia Projector

1 Answer

Alignment (convergence) of color panels MT1050


I can assist you with that if you want. It is very tedious, but can be done. You need a cross hatch pattern generator or something with vertical and horizontal lines to lineup the LCD Panels again. Tricky little procedure if your not familiar with it. Let me know if i can assist you and hopefully save you agravation at the same time. Thanks Jay

Jan 12, 2008 | NEC MultiSync MT1050 Multimedia Projector

1 Answer

Double vision-without viewing under the influence


Their are adjustments on the main video board of the projector for alignment of the three LCD screens, But these should only be made by a qualified professional as they can make it worse if done wrong.

Dec 07, 2007 | NEC MultiSync MT830 Multimedia Projector

2 Answers

LCD PRojector has pinkish color for entire image


How many hours are on your bulb? If it is near 2000 it is time to change it.

Nov 21, 2007 | NEC MultiSync MT1050 Multimedia Projector

1 Answer

How do I align the color on an MT850


Hi

pls check the board before the color wheel, as it is noticed that this problem comes with the main PCB Board.

Viren

Nov 19, 2007 | NEC MultiSync MT850 Multimedia Projector

1 Answer

Color Alignment


reset the settings to factory default. then re-solder the fingers on the edge of the power supply board where it goes into the main board edge connector.

Nov 14, 2007 | InFocus Proxima DP6155 Multimedia...

Not finding what you are looking for?
NEC MultiSync MT1050 Multimedia Projector Logo

Related Topics:

527 people viewed this question

Ask a Question

Usually answered in minutes!

Top NEC Multimedia Projectors Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

5653 Answers

The Knight
The Knight

Level 3 Expert

68301 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a NEC Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...