Question about Yahoo Diamond Vision DVDC803-04 DVD Player

2 Answers

Code for remote / Diamond Vision DVD Player model: DVD807-04

I have a Diamond Vision DVD player that worked fine until I had hooked up Rogers cable. I do not know the program code to set up on the Rogers remote. Is there a code and instructions on how to solve this problem. Thanks to anyone that can help.

Posted by on

  • postiepeggy Dec 21, 2007

    This is an old player , but works great. I too need a code for the diamond vision (modle # DVDV807-04A) .I lost the remote & have a universal RCA remote & it doesn't have a code listed for this brand,let alone the modle #.

    I tried the code retrival & auto search, and none of these methods seem to be working.

    thanks in advance peggy

  • Anonymous Nov 02, 2008

    i have a dvd dimond vision dvd player and i got a universal remote and can't find the code for the dvd

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I found the code! It is 0736. The company is now called AudioLogic.

Posted on Dec 30, 2007

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 934 Answers

Diamond vision is a little pickey with handing out their code access. And Rogers doesn't have a whole lot about accessing components like DVD players. But try this: 1. Turn on DVD player 2. Press the AUX button at the top of the remote 3. Press and hold the SETUP button until the LED light blinks twice. 4. Press 9-1-1 in sequence, the LED will blink twice again. 5.Aim the remote at the DVD player and slowly alternate pressing POWER and AUX. Stop when DVD turns off. 6. Press SETUP to lock the code in memory. It may take several minutes of alternating between POWER and AUX to find the appropriate code - be patient... If after ten minutes you haven't got it try programming it as a VCR - steps 1 through 6 above and substitute VCR for AUX.. Good Luck Bill

Posted on Jun 11, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sanyo tv,RCA universal remote,Diamond Vision player--compatible?


Sorry it took so long to respond to your request for assistance. You can find the instructions and codes you need to program your television at the RCA customer support website [http://www.rcaaccessories.com/rcaaccessories/ ] Copy this web address and paste it into the address bar of your web browser. This will take you to the RCA main customer support page. Just go to the universal remote control section and find your model remote control. Use the model number to find the technical support information page. On this page will be a copy of the owners manual and the remote control codes to use with your products. I hope this information helps you with your problem of needing instructions and codes to use your remote with your products. Thank you for using FixYa and have a nice day!

Jan 12, 2009 | RCA 3-Device Universal Remote with...

1 Answer

DVDV809-04


You need to convert your machine to an all-region player. The following hack works for Diamond Vision models 803 and 807 - there's a good chance it will work for the 809 provided they've used the same firmware for this model.

The region-free hack works as follows:

1.) Turn on the power and wait until the 'NO DISC' message appears, then press OPEN/CLOSE on the unit itself to open the door of the DVD player

2.) On the remote control, press SETUP. A menu will appear onscreen.

3.) Enter the following number sequence via remote: 1 3 8 9

4.) A different menu will appear. Your cursor should now be sitting in a box with the current region displayed. Use the UP and DOWN arrow keys on the remote control to display a specific region's numerical code, or select '0' (this is the number zero - not the letter o ... this is the region-free setting).

5.) Press ENTER and then SETUP to exit.

6.) Your DVD player will now play DVDs from all other regions. The code only has to be entered once. Powering down will not cause the Diamond Vision to lose its region-free setting. An added plus: it automatically senses PAL/NTSC signals but it will output to an NTSC tv set.

Sep 02, 2008 | Yahoo Diamond Vision DVDC803-04 DVD Player

1 Answer

Diamond Vision DVD Player 803-04


call number of back of manuel and they can sent you one for 12. If you need number you can message me or look it up,

Jul 06, 2008 | Yahoo Diamond Vision DVDC803-04 DVD Player

1 Answer

Diamond Vision Progressive Scan DVD Player


The only Diamond Vision Codes I can find are these.
Hope one works for you.

0622, 0496, 0810

Have a nice day!

Feb 24, 2008 | Televison & Video

5 Answers

Diamond Vision TV/Remote


SOLUTION: I had the same problem with a Diamondvision DTV3913. After trying many universal remote controls, I found one that worked. The RCA universal remote CRCR3273 / CRCR3373 (also referred to as RCR3273 / RCR3373) was the answer. It has 3 codes (1232, 1233,1234) for DiamondVision TVs and the first one worked. It gives me all the control I needed including the hard to get ones like input selection, main setup menu etc. It also has codes for DiamondVision DVD players and VCRs. I see it at BestBuy for $8.

Jan 10, 2008 | Yahoo Diamond Vision DVDC803-04 DVD Player

1 Answer

Code for universal remote


This must be a duplicate post. And because I'm not sure which one you'll check I'll just post the answer here too... Diamond vision is a little pickey with handing out their code access. And Rogers doesn't have a whole lot about accessing components like DVD players. But try this: 1. Turn on DVD player 2. Press the AUX button at the top of the remote 3. Press and hold the SETUP button until the LED light blinks twice. 4. Press 9-1-1 in sequence, the LED will blink twice again. 5.Aim the remote at the DVD player and slowly alternate pressing POWER and AUX. Stop when DVD turns off. 6. Press SETUP to lock the code in memory. It may take several minutes of alternating between POWER and AUX to find the appropriate code - be patient... If after ten minutes you haven't got it try programming it as a VCR - steps 1 through 6 above and substitute VCR for AUX.. Good Luck Bill

Jun 10, 2007 | Yahoo Diamond Vision DVDC803-04 DVD Player

Not finding what you are looking for?
Yahoo Diamond Vision DVDC803-04 DVD Player Logo

7,444 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yahoo Televison & Video Experts

Craig Butler
Craig Butler

Level 3 Expert

1723 Answers

richie46

Level 3 Expert

12962 Answers

Ernest
Ernest

Level 3 Expert

333 Answers

Are you a Yahoo Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...