Question about Home Security
Was setting up admin password using remote The password not put in correct and was saved dont know what it is
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
In the C:\Windows and look for DVR2.ini file. Open the file and scroll to the "Users" section and look for admin and replace all of the information next to the "=" with:
This will replace the current password with a blank password.
Posted on May 26, 2010
SOURCE: Some body was chaged the
Obtain the manual for the mother board. Look for the CMOS reset jumpers the diagrams, it should be three pin with a plastic jumper on two. Move the jumper from the first two pins to the last two pins, then turn on the computer. This will reset the bios. Turn the computer off, then place the jumper back in it's original position so you retain any new changes you make.
If that is not possible, or seems over your head, look for a button battery the between the size of a nickel and a quarter. It usually lies flat on the board, but sometimes is mounted standing on its edge. Pull this battery out of the board while the power cord is unplugged. Press the power button a few times, then wait a while (I've waited a few hours, but 20 minutes or so should be enough.). Without replacing the battery, plug the power cord and turn it on. CMOS should be reset, allowing you to do what you need.
Posted on Apr 12, 2011
Testimonial: "thank ' s very much "
Tips for a great answer:
Jan 15, 2018 | Lorex Home Security
Feb 01, 2016 | Lorex Eco 8-channel Dvr Security System W...
Jan 24, 2015 | Lorex ECO2 16-Channel Security System,...
Jan 17, 2015 | Lorex ECO 16Channel Security DVR with 16...
Oct 08, 2014 | Lorex ECO 4 Channel Security DVR with 4...
After system boot-up, hold a right mouse click
button and there will be login window. Hold a left
mouse button to click the order of "Account", and
input correct account. Then left click the order of
"Password" and input correct password. At last
left click "Login" to enter system. There is one
factory-preset login "account/password"
"admin/111111" at admin level. The user can
use it to login the system for the first time
May 22, 2011 | Ganz DR4NC-160 DVR DIGITAL VIDEO RECORDER...
Nov 11, 2010 | Lorex (L3501090)
Nov 05, 2010 | CSi Speco Speco DVR-T4IP 4-Channel Triplex...
625 people viewed this question
Usually answered in minutes!