Question about Hardware & Accessories
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Use the top button to adjust the current time & then push the bottom button once to save. Next is the time you want the lights to turn on & push bottom button once to save. The last setting is the time you want the lights to turn off. Don't forget to use the . (period) indicator for the pm setting. (I had the same problem and had to search the net to find someone else who had posted the instructions.)
Posted on Dec 14, 2008
The backup battery is a rechargeable battery located inside the unit and cannot be changed.
When the battery goes bad, the timer needs to be replaced.
Posted on Nov 03, 2010
ET525C is UPM timer
UPM ET525C Manual
Instructions are 14 pages. It is impractical to re-write 14 pages of instructions.
If you have a problem, add a comment and say exactly which programming you want to set, and I will respond.
-Timer can be programmed for ON and OFF times, for Dawn-Dusk, for Countdown, for Daylight countdown, for daylight saving, and for Random. Each different programming option has 8-12 steps shown in manual.
Posted on Nov 29, 2010
All Woods timers and manuals
N1506 is heavy duty outdoor timer with display screen.
Plug timer in and display flashes C.
Set current time: press Time button once and display shows 1 am
Keep pressing time button until current time with am pm displays.
Dot in lower right corner corresponds to pm hours.
To set timer program:
Press Mode button, display flashes P
Press Time button until desired ON time displays.
Press Mode button again and display flashes E
Press Time button until desired OFF time displays
When programming is finished, press Mode button and display shows current time.
To reset timer, unplug timer for 10 seconds and re-program timer.
Timer must be reset after power outage. Display will warn by flashing C.
Plug lights into timer.
If lights have a switch, switch must be on.
For manual override, press Mode button, and display shows O and lights will be ON until next program change.
To use timer function, press Mode button until current hour displays.
Posted on Dec 12, 2010
Tips for a great answer:
Nov 20, 2016 | Hardware & Accessories
Dec 09, 2013 | Hardware & Accessories
Nov 24, 2012 | Hardware & Accessories
Dec 12, 2010 | Solar Noma 7 Day, 6 Event Outdoor Timer -...
Dec 06, 2010 | Solar Noma 7 Day, 6 Event Outdoor Timer -...
Nov 30, 2010 | Solar Noma 7 Day, 6 Event Outdoor Timer -...
Nov 28, 2010 | Solar Noma 7 Day, 6 Event Outdoor Timer -...
Dec 21, 2009 | Solar Noma 7 Day, 6 Event Outdoor Timer -...
Dec 01, 2008 | Solar Noma 7 Day, 6 Event Outdoor Timer -...
Aug 21, 2017 | Hardware & Accessories
90 people viewed this question
Usually answered in minutes!