Question about Televison & Video
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: one for all remote control
Hello, you can try the search method,
you do this by either holding down the device button eg: TV or if you have one the "magic" button for three seconds, a light should then flash twice to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)
Posted on Dec 21, 2007
If you don't have a code you can do these steps to get your universal remote working with pretty much any tv:
1.) Turn your TV on. Then on your remote press the set button, it's the small gray button above the green button that says TV.
2.) Press the TV button. There should be a red light to the right of the SET button. This means that your remote is ready for the TV code.
3.) To find the TV code, press the + or - on your remote. This is located above the orange buttons. Once the volume on your TV goes up or down, stop pressing the + or - button.
4.) Then press the SET button again to set that code for your TV.
If the above steps do not work, keep trying. It will work! ;)
Posted on Jan 30, 2008
most universal remote would work like this... press butons tv and power on at same time till red light of remote lights still. then press 110. then presto, it works... i hope i help in a way.
Posted on Aug 31, 2009
On most universal remote control, you will find the procedure to enter the builder code OR a procedure to pass through all the code of the remote, one by one and pass to the other TILL you find the right one.
Posted on Oct 08, 2009
Tips for a great answer:
Jun 01, 2015 | HCDZ General Remote Replacement Control...
Oct 14, 2014 | TCL L32D20
Jan 25, 2014 | TCL 50 Class LED HDTV - 1080p, 1920 x...
Oct 22, 2012 | Televison & Video
Jun 29, 2012 | Televison & Video
Sep 10, 2011 | Universal Remote Control Remote Control
Sep 24, 2009 | Tvone TV-207 Television
Nov 28, 2008 | Akira EPM-420A 42 in. Plasma Television
Jan 30, 2008 | Televison & Video
Jan 30, 2008 | Universal Remote Control Remote Control
105 people viewed this question
Usually answered in minutes!