Question about RCA P60828 TV

1 Answer

62 rca rear projection tv

Sound will come on but picture does not. can change channels and volumes still. the 3 tubes glow a the bottom a little.

Posted by on

  • 2 more comments 
  • barrettclay Jan 13, 2009

    my ctc p60752eb for the rca 62' rear projection

  • barrettclay Jan 13, 2009

    and chassis # ptk169pec

  • barrettclay Jan 14, 2009

    how much does will it cost me?

  • Daniel Conklin
    Daniel Conklin May 11, 2010

    can you post the CTC number on the back of the set ???

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 240 Answers

Ok with set runing unplug ac cord and plug back in. will audio come on for a short time ???
if so replace IC1602 part number is 207828.

Posted on Jan 13, 2009

  • Daniel Conklin
    Daniel Conklin Jan 13, 2009

    check conection from yoke to main circet board

    check c701 or 7001 for good solider sum units had this part with one pin no soldier.

    and q7001 will go bad.

    hope this info helps you.

    regards

    daniel.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Connecting rca tv model#F20352SF to a tv converter box


  • Connect ANTENNA OUT of STB to antenna terminal on rear of TV OR, for better picture, connect 3-wire cable to color coded L AUDIO, R AUDIO, and video outputs on rear of STB and connect other ends to L AUDIO, R AUDIO, and video inputs on rear of TV.
  • If STB connected to antenna terminal of TV, set CH 3/4 switch on rear to whichever channel is NOT used in your area.
  • Connect antenna to ANTENNA IN of STB
  • Connect STB to power and use STB remote to turn on
  • Turn on TV
  • If STB connected to antenna terminal of TV, use TV remote to select channel 3 (or 4).
  • Use STB remote to select SETUP and perform channel search.
  • Use STB remote to change channels.

Oct 23, 2016 | RCA Televison & Video

1 Answer

Hello my mother's rca tv is stuck on channel 91. when i turn it on and use the channel keys on the set, they don't change the channel. i'm trying to get it on channel 3 so she can watch her cable.


Press Setup until you see AutoProgram... press Volume ... you will see the channels start to change. It will cycle to ch 62 or so, then go back and do the lower channels. as soon as it hits 3, quickly press Setup. it will stay on ch3, if not do it again. Once you get it on ch3, press setup until you see Channel Add/Del ... press Volume to add it. Press setup until screen is cleared. Ch /- should now toggle between 3(cable) and 91(a/v in)

May 17, 2010 | RCA Televison & Video

1 Answer

The rca tv and converter box were working. Now only fuzz on the


one try is to unplug the tv and then hold the power button in for 20 seconds then plug the tv in an see if this works. I had a 32 in rca tube an this worked for me

Mar 17, 2010 | RCA 27F650T 27" TV

2 Answers

Turn it on i hear a click but no picture, about 10 seconds later the tv clicks again like it's turned off


Sounds like your tube is out. To fix it would cost more than the TV. Try to unplug it overnight and try agian. Post again when you try that and we can try something else.

Mar 17, 2010 | RCA 27V530T 27" TV

1 Answer

RCA TV picture bigger than screen


if the tv width is ok try entering to service menu (do not use remote control) as follow:
1) turn the set on.
2) press the menu button and hold it down while pressing the power button.
3) while holding down the menu button release the power button and press
the volume + button.
4) The screen will display a one line menu, on the left the parameter P00,
and on the right the value of the parameter V00
5) release buttons.
6) using the volume + button change the right parameter until 76
7) using the channel down button change the left parameter until 06 (vertical size)
8) whith the volume + or volume - adjust the screen size.
9) when your tv is OK back to parameter 00 using the channel up button.
10) press menu button.
and trouble solved.

Mar 05, 2010 | RCA F32650 32" TV

1 Answer

TV won't come on.


I Have this same problem, Open the box on the top of your tv and unplug the wire with the white plug. The tv will switch on but u can't change channel. Hope u have receiver to change channel. If u have solution for the volume, tell me please. Ty

Oct 06, 2009 | RCA F32650 32" TV

1 Answer

Rca 62" PROJECTION FLATSCREEN - COLOR PROBLEM/FLICKERING SCREEN


Sounds like the red picture tube could be shorting internally which would cause the "all red" condition. In which case you'd have to replace the red tube. Are there horizontal (slightly slanted) lines through the picture as well when this is happening and a very very bright screen? If so it's most likely the tube.

Oct 06, 2008 | RCA F36645 TV

1 Answer

Powers on by itself


TV worked FINE for the past 2 yrs---this morning we woke up and the screen is totally BLACK! No sound..nothing. REmote doesn't do anything to the TV. Red light says ON unless we unplug it. Remote won't turn off the TV.
Any advise? Picture tube??
Worked great w/out any problems until we woke up today!

Thanks,
Tina

Jun 01, 2008 | RCA 32V420T 32" TV

Not finding what you are looking for?
RCA P60828 TV Logo

Related Topics:

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69808 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...