Question about Lands Phones
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If you have listened to all messages on the answering machine, then this is the "tone" that the phone company sends out for those people who have paid voicemail with the carrier.
Page 41 of the manual - "if the handset still indicates there are new messages even after you ahve listened to all new messages, turn it off by pressing and holding [OFF] until the handset beeps.
Page 40 of the manual - "Turn VM tone detection on/off - the default setting is "ON" 1. [Menu], then press #332 then choose [OFF] - now when the phone company sends a tone out to your phone it will be ignored.
Posted on Jun 17, 2008
SOURCE: "no link to base" error message
Sounds like the antenna is not working, and signal is not getting to the cordless sets.
Try unplugging your base station (unplug everything; power and phone cable - the basestation were all the cords are plugged into) and leave it unplugged, pull out all the batteries in the phones, and then start by putting all the batteries back into the phones.
Once the phones are back and powered up, plug in the base station again, and see if that helps.
All this is doing is re-setting the phones and base station and forcing them to re-link to each other.
I hope this helps.
Posted on May 01, 2009
Panasonic KX-TG1050N Cordless Phone. Base handset (No. 1, KX-TGA100N) does not work, no keypad response or dial tone. Green indicator message light ON (should only work with the TG1000N base unit) all the time till battery runs down. Display shows message ?C533?. Can still send and receive calls on extension phones 2 and 3.
Posted on Sep 10, 2009
Testimonial: "This responder did nothing but repeat my initial post and yet gets credit for a solution?"
if answering machine is on phone , go to messaging menu it should have a setting for number of rings... make sure toll saver option is off!
Posted on Nov 09, 2009
Tips for a great answer:
Jan 12, 2016 | Panasonic KX-TG6531B Digital DECT 6.0 1X...
Jan 14, 2011 | Panasonic KX TG2267 Cordless Phone...
Jan 08, 2010 | Panasonic Lands Phones
Nov 08, 2009 | Panasonic Lands Phones
Jul 28, 2009 | Panasonic KX TG5100M Cordless Phone
Nov 11, 2008 | Panasonic KX TG1000N Cordless Phone
Oct 25, 2007 | Panasonic KX TG2257S Cordless Phone...
275 people viewed this question
Usually answered in minutes!