Question about Logitech Harmony 520 LCD Remote Control

1 Answer

How to select the correct device in drop-down box when programing

I have a 520 remote.
I am connected to the internet. I am trying to enter the devices the remote will control. I am not sure about some of the terms/abbreviations in the drop down boxes. I have a TV (Samsung LN52A850) and Dish Network (VIP622) entered on the add devices screen. Does that include our Dish DVR???
I need to add the following devices but I'm not sure which is the proper selection in the drop down box to enter; the Sony Home Theater System (HTCT100), Samsung Blue-Ray DVD Player (BD-P1500), and a VCR Orion (VR5000A).

Posted by on

1 Answer

Sony Home Theater System - 'Mini System' Samsung Blue-Ray DVD Player - 'DVD' VCR Orion - 'VCR'

No matter what you enter the devices as, the software will determine what it actually is and set the type.

Hope that helps.

Posted on Apr 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Looking for code for my sylvania tv for my one for all access 4 u remote


Hello
Universal remote codes for Sylvania TV with One for all URC - 3300 remote control are:
0054, 0030, 0171

Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).

NOTE: Please read steps 2 through 4 completely before proceeding.

Highlight or write down the codes and device you wish to program
before starting step 2.

On the remote control,press a device key once (i.e., DVD/VCR,
CBL/SAT,or TV).

NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,

or TV/VCR/DVD Player Combo press DVD/VCR once.After programming

a VCR Combo device, you will be able to control channel selection,

volume, and VCR functions.

NOTE: To program control of a DVD Player,DVD Player/VCR

Combo, or TV/DVD Player Combo, press DVD/VCR once.After programming

a DVD Combo device, you will be able to control channel

selection, volume, and DVD functions.

NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)

Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.

Press and hold SET until the LED (red light) blinks twice,

then release SET.

4. Use the Manufacturer's Codes (starting on page 18) to

locate the type of device and brand name and then enter

the first four-digit code for your device. If performed correctly,

the LED will blink twice.

NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.

Aim the remote control at the device and press POWER

once.The device should turn off. If it does not, repeat

steps 2 through 5, trying each code for your brand until

you find one that works. If it still doesn't work, try

Searching For Your Code on next page.
NOTE: If the device does not have a POWER key, press PLAY

Repeat steps 1 through 5 for each device you want to control.

For future reference,write down each working device
code in the following boxes
OK.

Jul 13, 2011 | One For All URC-3300 Remote Control

1 Answer

Hot to program the remote for a mitsubishi tv


Hello
Codes for Mitsubishi with one for all URC 4220 are:
0093, 0150, 0178, 1250

The One For All 4 Device Universal Remote Control is preprogrammed at

the factory to operate an RCA TV, a Toshiba DVD player, aMotorola cable

box, and an RCAVCR.To control devices other than the default brands,performthe

following steps; otherwise skip this section:

1. Turn on a desired device (e.g.,VCR or DVD player) and, if

applicable, insertmedia (e.g., cassette or disc).

NOTE: Please read steps 2 through 4 completely before proceeding.

Highlight or write down the codes and device you wish to program

before starting step 2.

2. On the remote control,press a device key once (i.e., VCR/PVR,

DVD,CBL/SAT,or TV).

NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,

or TV/VCR/DVD Player Combo press VCR/PVR once.After programming

a VCR Combo device, you will be able to control channel selection,

volume,andVCR functions.

NOTE: To program control of a DVD Player,DVD Player/VCR

Combo, or TV/DVD Player Combo, press DVD once.After programming

a DVD Combo device, you will be able to control channel selection,

volume, and DVD functions.

NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)

Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)

Combo, press CBL/SAT once.

3. Press and hold SET until the LED (red light) blinks twice,

then release SET.

4. Use the Manufacturer's Codes (starting on page 36) to

locate the type of device and brand name and then enter

the first four-digit code for your device. If performed correctly,

the LED will blink twice.

NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter

the same code again.

5. Aimthe remote control at the device and press POWER

once.The device should turn off. If it does not, repeat

steps 2 through 5, trying each code for your brand until

you find one that works. If it still doesn't work, try

Searching For Your Code on next page.

NOTE: If the device does not have a POWER key, press PLAY.

6. Repeat steps 1 through 5 for each device you want to control.

For future reference,write down each working device
code in the following boxes:
OK.

Feb 26, 2011 | One For All URC4220 Remote Control

1 Answer

I have an old RCA TV (about 20 years old). I got the TV from a friend and she could not find the remote. I bought this remote but I cannot find the correct code to get it to work. Are there other codes...


HI,

Direct Code Entry:

Find the code your device.


1. Press and hold "CODE SEARCH".


2. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.


3. Enter the 3-digit code number.


4. Release "CODE SEARCH".


5. With the device on, press another button to test (volume control/power button).If it does not work, repeat steps 1 to 5 with other codes which you have.

follow the below steps to set remote without codes


Code Search:

1. Turn on the device you wish to control.

2. Press and hold "CODE SEARCH".


3. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.


4. Release "CODE SEARCH".


5. Press ON/OFF repeatedly until the device turns off.


6. When the device shuts off press and release ENTER.


7. Try using the remote. If it does not function repeat steps 1 through 6


To Get The Code Please Go To Below Website:

http://www.rcaaccessories.com/remotefinder/

You need to select the following information from the drop down list

1.Model of the remote
2.Type of device to which you want to program(TV/DVD/VCR)

Thank you

Sep 13, 2010 | RCA RCU410MS Remote Control

1 Answer

I have a zenith tv , n i have a digital stream converter box connected , the remote. Got un programmed i need.the code to program the remote to the tv , can you help me ?


HI,

Direct Code Entry:

Find the code your device.


1. Press and hold "CODE SEARCH".


2. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.


3. Enter the 3-digit code number.


4. Release "CODE SEARCH".


5. With the device on, press another button to test (volume control/power button).If it does not work, repeat steps 1 to 5 with other codes which you have.

follow the below steps to set remote without codes


Code Search:

1. Turn on the device you wish to control.

2. Press and hold "CODE SEARCH".


3. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.


4. Release "CODE SEARCH".


5. Press ON/OFF repeatedly until the device turns off.


6. When the device shuts off press and release ENTER.


7. Try using the remote. If it does not function repeat steps 1 through 6


To Get The Code Please Go To Below Website:

http://www.rcaaccessories.com/remotefinder/

You need to select the following information from the drop down list

1.Model of the remote
2.Type of device to which you want to program(TV/DVD/VCR)

Thank you

Aug 04, 2010 | RCA 3-Device Universal Remote

1 Answer

I DROPPED MY REMOTE AND THE BATTERYS CAME OUT AND NOW I CANT TURN THE CHANNEL SO I NEED TO KNOW HOW TO PROGRAM MY REMOTE


Hi.

Manual Programming:


1. Turn on the device with which you want to use the remote control.

2. Locate a 3-digit code for your device.

3. Press and hold the corresponding button on the remote control
(TV, VCR, SAT, DVD, CAB or AUD) for approximately three seconds unitl the POWER INDICATOR illuminates.

4. Enter the 3-digit code for your device within 30 seconds. The POWER INDICATOR shuts off.

5. Press power button to verify correct code entry. If the device shuts off, the code was entered correctly. If the device does not shut off, repeat steps 3-4, using a different code.





Automatic Programming

With automatic programming, the remote control tests all the codes available on the Code List and assigns the correct code for the selected device.

1. Turn off the device with which you want to use the remote control.

2. Press and hold the corresponding button on the remote control(TV, VCR, SAT, DVD, CAB or AUD) until the POWER INDICATOR illuminates. The remote control is in programming mode.

3.Press and release power button. The POWER INDICATOR flashes once and stays on
indicating the unit is in Power Scan mode.

3. Press CHANNEL UP or CHANNEL DOWN repeatedly until the device turns on.

4. When the device turns on, press OK to store the code.

5. Press any other button. If the device responds, the remote control has been programmed. If the device does not respond, repeat steps 2-5.


Thanx

Jul 29, 2010 | Hitachi CLU-5713TSI Remote Control

1 Answer

Harmony 520 no sound control for tv


I can help you program your Logitech Harmony 520 remote for your TV.

The Logitech Harmony 520 remote control is programmed through the Harmony Setup Software you can download from here.

Once installed, you will simply run the software, and select the devices you would like to control from menus. The software finds the right codes for you and loads them into your remote control.

I hope that helps.
_____________________________________________
Harmony 520 Manual Download
Logitech Harmony Firmware Update
Harmony Win Software Download
Logitech Harmony Safe Mode Fix
Harmony Remote Glow Light Fix

Sep 28, 2009 | Logitech Harmony 520 LCD Remote Control

1 Answer

I connected my Harmony 520 to my MacBook ... now what? where are the codes? Do I need a disc? because I don't have one. I have all the components info but I guess I don't know the site to go to. When I...


I can help you program your Logitech Harmony 520 remote using your MacBook.

The Logitech Harmony 520 remote control is programmed through the
Harmony Setup Software Download for MAC.

Once installed, you will simply run the software, and select the devices you would like to control from menus. The software finds the right codes for you and loads them into your remote control.

I hope that helps.
_____________________________________________
Harmony 520 Manual Download
Logitech Harmony Firmware Update
Harmony Win Software Download
Logitech Harmony Safe Mode Fix
Harmony Remote Glow Light Fix

Jul 11, 2009 | Logitech Harmony 520 LCD Remote Control

1 Answer

Cannot add new 722 dishnetwork satellite box to remote


I can help you program your Logitech Harmony 520 remote for your Dish Network satellite box.

The Logitech Harmony 520 remote control is programmed through the Harmony Setup Software you can download from here.

Once installed, you will simply run the software, and select the devices you would like to control from menus. The software finds the right codes for you and loads them into your remote control.

I hope that helps.
_____________________________________________
Harmony 520 Manual Download
Logitech Harmony Firmware Update
Harmony Win Software Download
Logitech Harmony Safe Mode Fix
Harmony Remote Glow Light Fix

May 23, 2009 | Logitech Harmony 520 LCD Remote Control

5 Answers

Cannot program Dish Universal Remote for Emerson TV


This worked for me. I had to scan down quite a few times but eventually my tv turned off and I set the code with the # button. It may work for you too and save you some money on a UR.

http://www.satellite-tv-planet.com/DishNetworkRemoteControlProgramming.htm
Scan For Device Codes If the code for the device you are programming is not listed in the user manual or on this site, try these steps to scan the remote controls memory for device codes.

1) Turn the power on the device on

2) Select and hold the mode button for which you are programming, such as the TV button, on the remote until you see all the lights of the mode buttons flash. Once you let go, that mode button that you chose should now be blinking. When using the Aux mode button only use the number pad to enter 0 for a second TV, 1 for a second VCR/DVD, 2 for a amplifier, tuner, or cable box. Then press the STAR (*) button.

3) Press the power button on the Dish Network remote control.

4) Repeatedly press the UP or DOWN button on the remote to scan for the correct code (do this slowly so you do not skip over the right code for your device). When the correct code is reached the device will turn off.

5) Press the POUND (#) button to store the code in the Dish Network remote.

6) Press the power button to turn the device back on and try using other buttons on the remote to make sure that they also work. Sometimes the power button will work while others may not.

Jan 06, 2008 | Universal Remote Control DIRECTV Universal...

1 Answer

Charter cable box


Could not find box on list but here is your product manual:
http://www.ofausa.com/remote_manual/CTGAE3P%203021%20anual%20booklet.pdf

PROGRAMMING DEVICE CONTROL
The One For All 3 Device Universal Remote Control is preprogrammed at
the factory to operate an RCA TV, a Toshiba DVD player, and a Motorola
cable box.To control devices other than the default brands,perform the following
steps; otherwise skip this section:
1. Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before starting step 2.
2. On the remote control,press a device key once (i.e., DVD/VCR,
CBL/SAT,or TV).
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,
or TV/VCR/DVD Player Combo press DVD/VCR once.After programming
a VCR Combo device, you will be able to control channel selection,
volume, and VCR functions.
NOTE: To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD/VCR once.After programming
a DVD Combo device, you will be able to control channel
selection, volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.
3. Press and hold SET until the LED (red light) blinks twice,
then release SET.
4. Use the Manufacturer’s Codes (starting on page 18) to
locate the type of device and brand name and then enter
the first four-digit code for your device. If performed correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.
5. Aim the remote control at the device and press POWER
once.The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works. If it still doesn’t work, try
Searching For Your Code on next page.
NOTE: If the device does not have a POWER key, press PLAY.
6. Repeat steps 1 through 5 for each device you want to control.
For future reference,write down each working device
code in the following boxes:

Dec 11, 2007 | One For All URC-3021 Remote Control

Not finding what you are looking for?
Logitech Harmony 520 LCD Remote Control Logo

391 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Remote Controls Experts

bill tarkulich

Level 1 Expert

33 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

netbot

Level 1 Expert

2 Answers

Are you a Logitech Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...