Question about Whirlpool Washing Machines

1 Answer

I have a front loading washer ghw9100lw2

The power comes on but the washer won`t run.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Make sure the detergent/softner/bleach drawer is all the way closed and the small slider on it is secure.

Posted on Jan 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a front loader whirlpool duet #ghw9100lw2


The filter on your pump is probably clogged with lint and stuff. You have to remove the bottom front panel, 3 torx screws underneath. The panel will drop and come off. Drain off the excess water from the drain pipe you see. The white filter cover is right in front. Get yourself a good plastic bag to collect water. Unscrew the filter cover and twist the filter out. Clean out all the stuff and put it back in carefully. Check your pump too, comes after the filter.

Apr 08, 2009 | Whirlpool Duet GHW9150P Front Load Washer

2 Answers

Vibrating Whirlpool ghw9100lw2


At Lowes you can purchase foam rubber pads 4"X5" pack of two for $3.50. If walking forward and after cecking level and washer pads are tight, place half of one pad under each of the two front feet. Place the sticky side against washer feet. Solved my problem.

Feb 15, 2009 | Whirlpool Duet GHW9150P Front Load Washer

2 Answers

Squeeking noise on whirlpool washer duet ghw9100lw2


replace your belt in back easy.every year if still has smell buy warranty your rear bearing is going bad."less soap plz"

Nov 13, 2008 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool washer model number GHW9100LW2,SER# CSR2021497


Central Control Board part 8182221. You can go online repairclinic.com to order parts.
Good luck

Jun 27, 2008 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool front load model#ghw9100lw2 Sour smell in trao


TRY RUNNING A COUPLE OF HOT LOADS(EMPTY) WITH DISHWASHER DETERGENT THIS WILL HELP BREAK UP THE MILDEW BUILT UP IN THE MACHINE
DO NOT USE DISH SOAP!!!!!!!

Feb 21, 2008 | Frigidaire ATF6000ES Front Load Washer

1 Answer

Whirlpool ghw9100lw2 front load washer doesn't use both hot and cold


first make sure the hoses aren't reversed hot on cold or cold on hot next turn off cold water remove the hose from the washer and check to see if the screen on the washer is clogged if not get a bucket turn on cold water and see how strong the water is then let me know what you find dont rate me till we are done

Jan 10, 2008 | Whirlpool GHW9100L Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...