- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
In most cases this error has something to do with the printers LVPS (Low Voltage Power Supply ). If the printer is connected to power surge, try to connect it to an outlet from the wall. Do an An AC power check - check the AC line voltage at the end of the AC line cord. If the Ac line cord is incorrect, replace the cord. Also check if the cord is in good condition. if not, replace the cord. If you still get the same errror, you may need to replace the printers' LVPS. For further assistance assistance please contact Lexmark Technical Support.
did you uninstall the driver?
when you hook your cable to USB port, you pC should detect your printer. Try to cycle power your PC and try to hook your cable to another USB port after you uninstall the driver
SolutionStep one: Perform a power reset and connect the printer directly into the electrical outlet Remove all the paper loaded in the main input tray.Make sure that the product is turned off. Disconnect the USB cable from the back of the product. Disconnect the power cord from the product. Disconnect the power cord from the electrical outlet and wait 10 seconds. Reconnect the power cord directly into the electrical outlet and check for the following. Make sure that the power cord used is the one provided with the product. If a computer is connected to the product, make sure that the computer is connected to a grounded (three-prong) wall outlet. Make sure that the power cord is firmly connected to both the product and the power supply. Reconnect the power cord to the back of the product. Press the power button ( ) to turn on the product. Reconnect the USB cable to the back of the product. If the issue is resolved, proceed to Step six: Print a self-test page. If the issue continues, proceed to the next step.