Question about Zhone (6218-I2-200) Router
Setup WEP Security Access....
Click on Wireless
Set/CHANGE SSID (save)
click on Wireless Security
Change Disabled to WEP
choose 64 bit or 128 bit
create PASS PHRASE - any common word, about 8 characters long REMEMBER THIS
this will deliver a series of KEYs. Write (1) KEY down and bring it to your known wireless devices (laptops, desktops, etc).
Save & power cycle all devices connected (this will reset all wired connections as well)
go over to your wireless devices, re-identify connection. you will need the KEY. Carefully enter in all letters and confirm. save these settings.
This should cure your problem. and never run a nekid wireless system unless you want others to access.
in Basic Setup, around the DCHP Setup you can also limit the number of users. My calculations are normally - Number of Wired Connections + Number of Laptops +1 for emergency service. This will allow X+1 connections, therefor limiting the number of potiential users to be able to grab an IP Address.
Best of luck!
If you have further issues, please contact me at 906-495-1707 or via YIM firstname.lastname@example.org or through this website.
Posted on Jan 13, 2009
Tips for a great answer:
Aug 09, 2011 | Cisco Linksys Wirelessn Router Black...
Mar 21, 2011 | D-Link AirPlus DI-614+ Wireless Router
Jan 30, 2011 | NetGear DGN2000-100NAS Router
Dec 05, 2010 | Routers
Dec 30, 2009 | Belkin (F5D7230-4) Router (587009)
May 27, 2009 | Belkin Wireless G Plus MIMO (F5D9230-4)...
165 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: