Question about Computers & Internet

Open Question

"the port is not connected check it" Printer Samsung CLP 320

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

bronk50
  • 27725 Answers

SOURCE: "the port is not connected

You might have to uninstall the printer restart your computer then reinstall your printer
click start control panel administrive tools computer management device manager scroll to ports(COM&LPT) + to expand you should see a communication port and Ecp printer port you might see a yellow?question mark this will mean you need to install a new driver for this device right click you will have options to update driver,disable,uninstall or select properties again you will have the similiar options also you can troubleshoot the device
hope this helps

Posted on May 03, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error message appears please install supported driver or port


ok So I did alittle research for you.... you either have the wrong driver or your printer is set to the wrong port via the printer properties in windows but here is the driver download page and a manual download as well http://www.samsung.com/ca/consumer/office/printer-multifunction/colour-laser/CLP-310/XAA-support

Oct 10, 2013 | Samsung CLP-310 Series

2 Answers

The printer port is not connected however wps light is on


I would recoment to reload the drivers. Just delete the driver first before you re install it again. this will save a lot of frustration.

Oct 03, 2012 | Samsung CLP 300 Laser Printer

1 Answer

Samsung clp 320 'door open' problem


If the printer was just powered up and immediately gave the door open error, look for a paper jam. When this happened to me, that was the problem, even though it was saying that the problem was an open door.

Aug 01, 2012 | Samsung CLP320 AllInOne Laser Printer

8 Answers

Counter reset of samsung scx 3201


we have solution for all model of samsung printers
ML 1640/2240/2245/1911/2525/2526/1660/1665/2580/2850
SCX 4300/3200/4824/4828/4600/4623F/4623FN ETC
CLP 315/320/310/325 ETC
info@nakshatraworld.com

Jan 19, 2011 | Samsung Office Equipment & Supplies

1 Answer

CLP-315 - CLP-315 Laser Printer: Printer says it is online and ready to print. All ...


Hi,

you may want to run a repair on the printer driver. by going to windows START -> all programs -> Samsung CLP 310 -> Maintenece - > repair and follow the onscreen next till finish.

this could help some time when you swap USB cable or port or PCA main been replace or updated.

May 17, 2010 | Samsung CLP 315 Laser Printer

1 Answer

Samsung CLP-300 printer is not recognized on any computer. Turns on fine, green light, prints test page offline, but when plugged in USB to either a mac or PC, never recognized. Reinstalled software,...


If you have the green light and test prints OK, check the condition of the USB connector in the back of the printer. The pins inside get damaged by being too close to the wall or something like that, broken connections to the logic pcb, You can solder a new connector on if that's the problem, otherwise you may need a new circuit board.

Feb 07, 2010 | Samsung CLP 300 Laser Printer

2 Answers

Samsung CLP-350N installation problems


Normal 0 Could have a corrupt driver.
Disconnect the printer or at least be sure it is turned off. I'd do both and when the CD software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud

Dec 31, 2008 | Samsung CLP-350N Laser Printer

1 Answer

CLP-550N problem with MacOS 10.4.7


Don't know if this would work:

from: http://www.macintouch.com/tigerreview/incompatibility.html

"I have one and have just finished preliminary testing. I have a CLP-550N and use the network port to connect the printer to our wired network. Using Bonjour (a.k.a. Rendezvous) does not work. I can successfully setup the printer, but it will not print. LPD, however, does work fine. You may need to reinstall the PPD files from the CD, or download them from there (sic) website." Brad Scheider reports: "Samsung no longer supports a CLP-500 driver. But I've found that the CLP-510 Driver works in Tiger and fixes many problems I had with the CLP-500 driver on Panther. Works great now."

Apr 09, 2008 | Samsung CLP-550N Laser Printer

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...