Question about Home Security
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Make sure you are working the dial properly for this type of safe. With the door lever fully counter clockwise, turn the dial clockwise a couple turns to start. It should turn quietly. Then turn the dial counterclockwise (LEFT) to the first number in the combination. Now turn the dial clockwise (RIGHT) a full turn passing the first number again, and additionally clockwise to the second number. Then turn the dial counter clockwise from the second number directly to the third number. Try to open with a sharp movement of the door lever clockwise. If this does not work the first time try adding or subtracting ONE to each number in the combination in case the mechanism is worn. If it still does not work it is time for a drill and a power saw to cut the thing open!
Posted on Mar 15, 2009
I finally ignored the poorly-written instructions for programming a personal code and simply entered the factory code first and then pressed the prog/enter code button. The safe opened. The instructions tell you to push the prog/enter code first and then enter the factory code or personal code to open the safe. Wrong! Do it my way should this problem happen to you.
Posted on Mar 23, 2009
Being a master locksmith we see this problem all the time on the Sentry Safe F3300 What happens is this Sentry Safe has a waterproof seal that sticks the door shut to prevent watter damage. But in doing so makes it seem like it will not open. We suggest pushing down on the left rear corner to pop the front of the lid open
Posted on Aug 05, 2010
SOURCE: Sentry S3807 safe-cannot open
locksmiths agree on how to install sentury safe batteries
slide open the battery cover located just below the keypad.
Insert a paper clip or pen point into the small hole in the cover. Push in while sliding cover to the right. Disconnect and remove the battery holder. Insert the 4-batteries as indicated.
reconnect the connector and put back the battery holder. Slide the cover back in place.
How do I insert the batteries on my advanced electronic lock safe?
to install batteries, turn the electronic lock case to the right and remove.Insert four new batteries as indicated, replace the electronic lock case and turn to the left to reassemble.
Posted on Aug 09, 2010
Tips for a great answer:
Jan 16, 2016 | Sentry Fireproof Safe
Jan 05, 2016 | Sentry Safe Fire-Safe .8 Cubic Ft....
Dec 28, 2015 | Home Security
Oct 27, 2010 | Sentry Fireproof Safe
Nov 03, 2009 | Sentry Fireproof Safe
Oct 05, 2009 | Sentry Fireproof Safe
Aug 10, 2008 | Sentry Fireproof Safe
226 people viewed this question
Usually answered in minutes!