Question about Samsung Washing Machines

1 Answer

Samsung ji253gw/xeu washing machine

My machine floods on all setting except the spin any ideas

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

There is a plastic tube in some washers that automatically detect when the unit is at proper fill. Sometimes these tubes fall off, so the machine does not know when it is filled. If you have a newer unit, perhaps the "float switch" is out, or a wire off, and that would confuse the washer and let it continue to fill up. You should not be experiencing anything in the spin cycle, since the unit is not taking water in, but pumping it out, thus not utilizing the float device.

Posted on Jan 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wf1124xac/xeu. Why isn't the drum turning?


If you are certain that the motor failed, replacement may get the machine working again. Before replacing the motor, go to www.repairclinic.com and enter Wf1124xac/xeu to see a list of common replacement parts and possibly a video to help troubleshooting.

Apr 06, 2016 | Samsung Washing Machines

1 Answer

Kenmore topload washing machine that wont switch to drain


This assumes that you have a basic Kenmore / Whirlpool top load, direct drive, neutral drain (it doesn't spin until the pump removes most of the water) machine.

First, see the Sears parts site for your washer:
http://www.searspartsdirect.com/partsdirect/index.action

Enter your model number (###.#######) and you'll see a list of major sub-components with diagrams and parts.

Then, see the Whirlpool / Kenmore Service Manual for top load, direct drive washers.

https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/f7e2147fa98b28cf85257122007475cb/$FILE/L-55.pdf

Normally, this would appear to be a Lid Switch or Neutral Drain problem BUT since it is re-filling , it sounds like a Timer problem.

See the Service Manual for how to test / replace the timer.

Apr 16, 2010 | Kenmore Washing Machines

1 Answer

Washing machine comes up with error code se and won't drain the water or perform a spin, on model Samsung J1453SGS/XEU


I am not a repair professional. I am just a 78 year old man who has been making his own repairs for about 50 years. Therefore the washer ID doesn't mean
anything to me. It's been about 55 years since I had experience with front load washers. However I can refer you to www.applianceaid.com where they have very good trouble shooting and repair information on front loaders. I think you'll find what you need there. Don't worry about the timer, they hardly ever go bad. Good luck with it. If I have helped you, please rate my advice on fixya.

Nov 25, 2009 | Washing Machines

1 Answer

Washer does not rinse & spindry after getting submerged in water.


everything needs to be checked from the timer control button to the motor, im guessing it agitated through the wash cycle but wont spin now right? your flood could have damaged any number of items... run through ( with the machine unpluged ) and test the components for continuity and/or resistance.

Oct 26, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Washer just started on fill cycle to start and continued filling


you have a hose that came loose to the pressure switch or the tub or you have a bad pressure switch
or the fill cup is blocked

Apr 22, 2009 | GE WJSR2070B Top Load Washer

1 Answer

Washer Froze, Spin Cycle Sounds like Jet Engine


when it goes into a high spin does it sound like a freight train in your house if so your bearings are going bad

Dec 29, 2008 | Frigidaire GLTF2940ES Front Load Washer

1 Answer

Zanussi 1245w fails to spin


suspect it may not be rotating on wash either. check the moor brushes

Mar 30, 2007 | Zanussi F1245W Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Washing Machines Experts

easy alberta
easy alberta

Level 2 Expert

132 Answers

The Knight
The Knight

Level 3 Expert

69878 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Samsung Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...