Question about Computers & Internet
Not sure of the game console, but many routers have port forwarding, NAT config, or even DMZ bypass. Instead of getting all techy try this site. It has everything, and with pics.
Direct link for COD BO for Cisco Linksys-E1550.
Posted on Dec 08, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: ps3 nat type 3
In order to achieve NAT 2, you are going to have to set your PS3 to a static IP address and forward ports on your router.
detailed instructions on how to do this and configure your ps3 can be found here:
In order to get into your router settings, go to 192.168.0.1 OR www.routerlogin.net (the router sets up its own DNS) and putting in your username and password. If you have not set up a password, the default username and password for this router is "admin"/"password". Follow the instructions in the page I posted once you are logged into the router's webmin.
Hope this helps!
Posted on Jul 21, 2008
SOURCE: I need to change my nat settings
Type into the address bar www.whatismyip.com copy and paste your ip address into the address bar, a username and password will be required to access the page, most default usernames and passwords will be admin and password, for sky users the password may be sky, if these don't work then dont worry there are websites that have a list of all routers default usernames and passwords. once on the router setup go to security setup, and go to where it says WEP, click disable WEP and accept changes. if it is for gaming make sure that the UPnP is clicked on. and there you go, bare in mind that your pc may stuggle to connact to the router at this point because of the change, so just change the settings on your computer to suite the routers settings and there you are an open NAT and internet that still works. hope this works for you!
Posted on May 15, 2009
i will repost my guide for opening nat and firewall on a zyxel ...
it will help for sure ...
you can't just say nat is now OPEN :)
let's say you have a pc with IP of 192.168.1.33
you are running a emule (hehe) on that PC
you want to use port 12345 for your emule
this is what you need to do:
1. go to webinterface of your router (usually http://192.168.1.1)
2. go to menu network/nat/port forwarding
3.go to service->user define
4. in new window click "active", name it emule, start port 12345, end port 12345, server ip 192.168.1.33
5. click ok, apply, whatever and go to menu security/firewall/rules
6. choose packet direction wan to wan/router
7. click on ADD
8.change following fields: destination address - change to single addressand change 0.0.0.0 to 192.168.1.33 and click on add, then close to itsays ANY, mark it and click on remove
9. on same page under services click on edit customized services
10. choose number 1 or 5 or whatever :)
11. service name: emule rule, service type TCP/UDP, type single, port 12345
12. click on apply
13. go to menu maintenance/tools/restart
14.just in case restart the box and your zyxel is now accepting incomingconnections on port 12345 and forwarding them to 192.168.1.33 (your pc)...
i hope i helped
Posted on Sep 11, 2009
Instead of changing the NAT type, it is effective to forward ports on the router for your PS3. Perform the steps as mentioned in the below link:
I hope this information allows you to resolve this issue.
If I have helped you, please help me, and rate this suggestion the highest FixYa rating. If you cannot rate this post with the highest rating, then please comment to this post and I will try to help you further.
Posted on Oct 09, 2009
SOURCE: i cant change my nat
Step 1 : Check the IP Addressof the PS3 And take a note of it
Step 2 : Open RSP By typing 192.168.2.1 on the Address bar of the internet explorer
Step 3 : On the left side Click Firewall
Step 4 : Leave the Password blank and click Submit
Step 5 : Disable it And Apply Changes
Step 6 : On the left side Under Firewall Click DMZ
Step 7 : Add the IP Address of the PS3 in DMZ
Step 8 : Click Apply Changes
Step 9 : Restart the Router
Step 10 : Test the Connection
Posted on Aug 01, 2010
Tips for a great answer:
Feb 27, 2015 | Computers & Internet
Aug 18, 2011 | Computers & Internet
Feb 06, 2011 | D-Link Xtreme N DIR-655 Wireless Router
Nov 30, 2010 | Belkin F5D8236-4 Router
Jun 22, 2010 | Siemens SpeedStream 4200 (13A4200001)...
Feb 05, 2009 | Zyxel P660HW-D1 Router
Nov 11, 2008 | Zyxel P660HW-D1 Router
73 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: