Question about HP PSC 1210 All-In-One InkJet Printer

1 Answer

PRINTER DISPLAYS 00C515C4 MESSAGE AND ALL LIGHTS BLINK. CANNOT TURN OFF OR STOP. MUST UNPLUG TO CHANGE. HAS DONE IN PAST, UNPLUGGED, WAIT A MOMENT OR TWO, REPLUG, ALL WORKS.. THIS TIME, NOT RESPONDING.

Posted by on

  • wobbie_t Jan 14, 2009

    i have the sameproblem can any one avise me wht i can do

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • HP Expert
  • 297 Answers

Here is a link that shows the different blinking light patterns and their meanings:

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00861481&lc=en&dlc=en&cc=us&product=90764&rule=21439

Posted on Jan 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Its giving me error code 0x000234


Step 1: Reset the printer

1. Without turning off the printer, disconnect the USB cable from the rear of the printer.

The USB cable connects to the port on the rear of the printer. The port is labeled with the USB icon . If your printer has a network or wireless connection, ignore this step.

2. Remove the ink cartridges from the printer.
3. Wait until a message to insert the ink cartridges displays. If you do not see a message within a few minutes, skip to step 4 to disconnect the power cord.
NOTE: If your printer does not have a control panel, wait until the ink cartridge lights blink. If the ink cartridge lights do not blink within a few minutes, skip to step 4 to disconnect the power cord.
4. Disconnect the power cord from the rear of the printer.
5. Wait 60 seconds.
6. Reconnect the power cord. If the printer does not automatically turn on, press the Power button.
7. Reinsert the ink cartridges, and then close any open doors on the printer.
8. If you receive a prompt to print a calibration page, do so.
9. If you disconnected the USB cable, reconnect it to the rear of the printer.
10. Try to print.
These instructions come from the HP trouble Support Pages at
HP Inkjet Printers Ox or C2 Error Code Displays When Printing
If you need more help, try going there.

Nov 09, 2015 | HP Deskjet 6500 Series

2 Answers

Printer trouble


Try following this steps:

Disconnect the Universal Serial Bus (USB) cable from the back of the product, but leave the product turned on.
Open the cover of the product and remove the print cartridges.
Close the cover and wait for the Insert Ink Cartridges message to display.
Disconnect the power cord from the back of the product and wait for one minute.
Reconnect the power cord. If the product does not automatically turn on, press the Power button.
Open the cover and reinsert the print cartridges.
Close the cover. If prompted, print a calibration page.
Reconnect the USB cable, and try to print a print job from the computer.

Hope that helps........

Aug 09, 2008 | Office Equipment & Supplies

1 Answer

My printer has error f7.jpg


Try resetting the printer before anything else.
Solution one: Reset the product
  1. Without turning off the product, disconnect the USB cable from the rear of the product. NOTE: The USB cable connects to the port on the rear of the product. The port is labeled with the USB icon (?javax.portlet.sync=18962720e044f124c04ed0b232a15c01&javax.portlet.tpst=efb5c0793523e51970c8fa22b053ce01_ws_bi&javax.portlet.prp_efb5c0793523e51970c8fa22b053ce01=wsrp-navigationalstate%3ddocid%253demr_na-c00489814-33%257cdoclocale%253den_us&javax.portlet.rst_efb5c0793523e51970c8fa22b053ce01=wsrp-url%3dhttp%253a%252f%252f16.193.225.56%253a50002%252fsp4tssearch%252fimageservlet%253fdocid%253demr_na-c00489814-33%252fc01424575.gif%26wsrp-navigationalstate%3ddocid%253demr_na-c00489814-33%257cdoclocale%253den_us%26wsrp-requiresrewrite%3dfalse&javax.portlet.begcachetok=com.vignette.cachetoken&javax.portlet.endcachetok=com.vignette.cachetoken ). If your printer has a network or wireless connection, ignore this step.
    Figure 1: Example USB connection (your product might not look exactly the same as this example)
    ?javax.portlet.sync=18962720e044f124c04ed0b232a15c01&javax.portlet.tpst=efb5c0793523e51970c8fa22b053ce01_ws_bi&javax.portlet.prp_efb5c0793523e51970c8fa22b053ce01=wsrp-navigationalstate%3ddocid%253demr_na-c00489814-33%257cdoclocale%253den_us&javax.portlet.rst_efb5c0793523e51970c8fa22b053ce01=wsrp-url%3dhttp%253a%252f%252f16.193.225.56%253a50002%252fsp4tssearch%252fimageservlet%253fdocid%253demr_na-c00489814-33%252fc01651067.gif%26wsrp-navigationalstate%3ddocid%253demr_na-c00489814-33%257cdoclocale%253den_us%26wsrp-requiresrewrite%3dfalse&javax.portlet.begcachetok=com.vignette.cachetoken&javax.portlet.endcachetok=com.vignette.cachetoken
  2. Remove the cartridges from the product.
  3. Wait until a message to insert the cartridges displays. If you do not see a message within a few minutes, skip to the next step. NOTE: If your printer does not have a display, wait until the cartridge lights blink. If the cartridge lights do not blink within a few minutes, skip to the next step.
  4. Disconnect the power cord from the back of the product.
  5. Wait 60 seconds.
  6. Reconnect the power cord. If the product does not automatically turn on, press the Power button (?javax.portlet.sync=18962720e044f124c04ed0b232a15c01&javax.portlet.tpst=efb5c0793523e51970c8fa22b053ce01_ws_bi&javax.portlet.prp_efb5c0793523e51970c8fa22b053ce01=wsrp-navigationalstate%3ddocid%253demr_na-c00489814-33%257cdoclocale%253den_us&javax.portlet.rst_efb5c0793523e51970c8fa22b053ce01=wsrp-url%3dhttp%253a%252f%252f16.193.225.56%253a50002%252fsp4tssearch%252fimageservlet%253fdocid%253demr_na-c00489814-33%252fc01602202.gif%26wsrp-navigationalstate%3ddocid%253demr_na-c00489814-33%257cdoclocale%253den_us%26wsrp-requiresrewrite%3dfalse&javax.portlet.begcachetok=com.vignette.cachetoken&javax.portlet.endcachetok=com.vignette.cachetoken ).
  7. Reinsert the cartridges, and then close any open doors on the product.
  8. If you receive a prompt to print a calibration page, do so.
  9. If you disconnected the USB cable, reconnect it to the rear of the product.
  10. Try printing again.

Apr 08, 2014 | HP Deskjet 6940 InkJet Printer

1 Answer

Show error


E indicates an Error condition.

1.Without turning off the product, disconnect the USB cable from the rear of the product.

NOTE:The USB cable connects to the port on the rear of the product. The port is labeled with the USB icon ( ). If your printer has a network or wireless connection, ignore this step.

Figure 1: Example USB connection (your product might not look exactly the same as this example)


2.Remove the cartridges from the product.

3.Wait until a message to insert the cartridges displays. If you do not see a message within a few minutes, skip to the next step.

NOTE:If your printer does not have a display, wait until the cartridge lights blink. If the cartridge lights do not blink within a few minutes, skip to the next step.

4.Disconnect the power cord from the back of the product.

5.Wait 60 seconds.

6.Reconnect the power cord. If the product does not automatically turn on, press the Power button ( ).

7.Reinsert the cartridges, and then close any open doors on the product.

8.If you receive a prompt to print a calibration page, do so.

9.If you disconnected the USB cable, reconnect it to the rear of the product.

10. Try printing again.


1.Without turning off the product, disconnect the USB cable from the rear of the product.

NOTE:The USB cable connects to the port on the rear of the product. The port is labeled with the USB icon ( ). If your printer has a network or wireless connection, ignore this step.

Figure 1: Example USB connection (your product might not look exactly the same as this example)


2.Remove the cartridges from the product.

3.Wait until a message to insert the cartridges displays. If you do not see a message within a few minutes, skip to the next step.

NOTE:If your printer does not have a display, wait until the cartridge lights blink. If the cartridge lights do not blink within a few minutes, skip to the next step.

4.Disconnect the power cord from the back of the product.

5.Wait 60 seconds.

6.Reconnect the power cord. If the product does not automatically turn on, press the Power button ( ).

7.Reinsert the cartridges, and then close any open doors on the product.

8.If you receive a prompt to print a calibration page, do so.

9.If you disconnected the USB cable, reconnect it to the rear of the product.

10. Try printing again.



If that doesn't work you can log on to HP.com/Support and Drivers.
Find your device and search the error codes listed.
You can also download a real good Utility, HP Print and Scan Doctor.

Apr 27, 2012 | HP DeskJet F380 All-In-One Printer

1 Answer

I have a HP C5180, receiving error message 0xc18a0206 Ink System Has Failed. I have replaced all cartridges, unplugged power supply and USB cable for reset and am still receiving error message. Help! ...


Issue An 0xc18xxxxx or 0xc19xxxxx ink system error code displays on the front panel. The printer cannot copy, receive faxes, or print. Solution

  1. Press the On button to turn the printer off.
  2. Unplug the power cord from the back of the printer.
  3. Remove all the ink cartridges.
  4. Wait two minutes.
  5. Plug the power cord into the back of the printer.
  6. Press the On button to turn the printer on.
  7. Install the ink cartridges when prompted.
If the error code does not display, the issue is resolved. If the 0xc18xxxxx or 0xc19xxxxx ink system error code displays on the front panel, service the printer.

Mar 09, 2011 | HP Photosmart C5180 All-In-One InkJet...

1 Answer

I am getting error message 5100....can't locate the manual...Any ideas? Thanks!


Error 5100 indicates "carriage jam". The carriage is the assembly that contains the print-head and ink cartridges. This error can be difficult to solve because various things can cause it.

Make sure the ink cartridges and print-head are installed properly. Remove them and re-seat them.

Check the gears as best you can for any obstructions.

If the carriage moves to a center position when you open the cover as if to change cartridges, try a reset to clear the error message :

1. Turn off printer (use button, don't unplug)
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal

Sometimes you have to try this a couple of times, if you've never done it before. If this does not work, unplug, wait 3-4 minutes, then re-plug in.

Jan 15, 2011 | Canon PIXMA iP1600 Printer

1 Answer

Flashing lights and 00C515C4 error message


Hello,

According to Hp's website the product needs to be restarted in a particular way. The link below will give you step by step instructions.

http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00489814&dlc=en&product=3204464

Thanks

Aug 10, 2008 | Office Equipment & Supplies

1 Answer

00C515C4 error message


Hi, First I unplugged power cord from back of printer for about 60 seconds....then I plugged power cord back in to printer....next I held down the Power button on printer and it seemed to do a Reset of the Printer....All has been well every since.....Good Luck....

Jul 10, 2008 | HP Photosmart C5280 Printer

4 Answers

Printer trouble


Power cycle the printer. If problem remains, try a partial reset. You can do the partial reset as follows:
1. Unplug and replug the unit.
2. when lights flash on power up, hold down the ON/RESUME and PAGE SIZE buttons together.
3. When only the ON/RESUME button light flashes, you can release the buttons.
4. When the lights stop flashing, the reset is all done!

If problem remains, you are fully justified to ask HP to replace the unit for you (well, if you're still in warranty!). Good luck :)

Jan 18, 2008 | Office Equipment & Supplies

5 Answers

Printer trouble


Hi,

Find this in the web

http://h10025.www1.hp.com/ewfrf/wc/document?cc=hk&docname=c00489814&dlc=en&lc=en&jumpid=reg_R1002_HKEN

Use the instructions below to resolve the issue by restarting the product.
  1. Disconnect the Universal Serial Bus (USB) cable from the back of the product, but leave the product turned on.
  2. Open the cover of the product and remove the print cartridges.
  3. Close the cover and wait for the Insert Ink Cartridges message to display.
  4. Disconnect the power cord from the back of the product and wait for one minute.
  5. Reconnect the power cord. If the product does not automatically turn on, press the Power button.
  6. Open the cover and reinsert the print cartridges.
  7. Close the cover. If prompted, print a calibration page.
  8. Reconnect the USB cable, and try to print a print job from the computer.

Nov 29, 2007 | Office Equipment & Supplies

Not finding what you are looking for?
HP PSC 1210 All-In-One InkJet Printer Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...