Question about Computers & Internet

Open Question

What is the username for witribe wifi interface configuration?

I wanna secure my wifi modem i.e. password protected

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: Configuring DLink Wifi router for Reliance broadband

Reliance Wimax will be Dynamic (DHCP)

Step 1 :

Connect the Wimax wire from the wall outlet (power adapter provided by Reliance) to the computer directly. The computer must be in DHCP mode.
Check the IP Address of the Computer. It should be a public IP Address.

Step 2 :

Open a web browser. If you try to open any page, it will take you directly to the Reliance Broadnet Login page. Login with your Reliance User ID and Password. Then Log out.
Close the web browser.

Step 3 :

Now, connect the wimax wire to the WAN Port on the Router and the computer to any LAN port. You can open the Router Setup Page. Do MAC Cloning. Then, save changes. Run DHCP on the Router.
Also you can configure wireless network, by changing the SSID and security.

Step 4 :

On the wired computer, open web browser, go to Reliance Broadnet login page and login and start enjoying the service.

One problem, you might face is when the Router is turned off in between. You may have to repeat the Steps 1,2 & 3 to get the connection back.

Posted on Oct 20, 2008

  • 13 Answers

SOURCE: MAKING A WIFI MODEM SECURE

Change the "settings password" from default password to a complex one. Next make sure u set the wireless security to WPA or WPA 2 and password protect it too. (to go to settings of your modem type 192.168.1.1 in internet explorer)

Posted on Mar 18, 2009

SOURCE: My dataone WA3002G4 (BSNL) modem is not connecting to internet

You need to configure the pppoe connection in the modem.

Posted on Jul 24, 2009

  • 163 Answers

SOURCE: i need router configuration password for Zyxel P-660H-D1 modem

Download a userguide from http://us.zyxel.com/Support/Download-Library-Result.aspx?mif=20050726121025

I think the password is 1234 for admin mode

Posted on Aug 01, 2010

  • 65 Answers

SOURCE: i want to change the

You should not have to restart your modem after changing the password. Once you change that password you might be promt to enter your new password in to establish an internet connection following the password change. The preferred method to to access your modem is through your computer with the modems IP address.By default most of the afaq shamels passwords are as follows:
Default IP: 192.168.1.1
Username: Afaq_shamel
Password: stccpe_2007

Type in that IP address in any internet browser (Fire Fox, IE, etc) You should be prompt to enter in a user name and password. If the one mentioned above does not work try:
Username: admin
Password: password

I hope that this helps you along the way. let me know if there is anything else I can do to assist you.
Thank you

Posted on Jul 05, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to put password on my wifi settings


Open router configuration page by opening 192.168.1.1 in any browser and type admin as username and password. Now in the new page that appear, click on wireleass and in security tab you will get options to put security key. Choose password, level of encryption and click apply and reboot. Now your wifi is password protected.

Nov 28, 2012 | Computers & Internet

1 Answer

I was setting my configuration for my wireless modem to my internet modem using my disc I keyed in a wrong username and password how can I change it to the correct one please?


You can access the router through web interface and configure it. All you have to do is connect the router. Follow the steps given below: -
First you have to access the router through web browser (Internet Explorer) by typing the IP address of your router in the address bar, which is usually 192.168.1.1 or 192.168.0.1 (written at the back of router) depending upon the make/ model of your router
(unless you've configured otherwise, the default username is admin and the password admin OR password.) and lookup for the security options to do the following: -

Next step is to secure it:
1.On the left-hand side, under Setup, click "Wireless Settings" 2.Under "Security Options", select your desired encryption method (preferably WPA2-PSK)
3.Choose a Network Key - it can be anything, as long as it's 8-63 characters in length
4. Click Apply
Also make the following changes (recommended): -
1. Change the SSID (Name) of the router
2. Change the default administrative user name and password (unless you've configured otherwise, the default username is admin and the password admin OR password.)
(The above step would prevent unauthorized access to your router)

Now your router and your connection would become secure and the user has to provide the network key to access the internet.

Feel free to contact me for further assistance

CreativeTECH

Aug 05, 2011 | Computers & Internet

2 Answers

I want to find out how to secure my network. My neighhbours ar loggin in on because I pay for high speed access. The router is Belkin g Plus MIMO 180170


it depends on what you specifically want to password-protect: a. protecting the network from unauthorized users? b. protecting the network's admin interface?
for a. - log into your network's admin interface (usually http://192.168.0.1) - go to the category of wireless security - select the type of network protection you are looking for (strength - i.e. wep, wap, wpa2) and set your password following the steps listed within your router's admin interface...
for b. - log into your network's admin interface (usually http://192.168.0.1) - if you have never done this before, then your username should be filled in as Admin and leave password blank and hit enter.... from there, you are able to change or at least add a password to the interface from unauthorized access (usually under category security)

Jun 06, 2011 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

How to put password to wifi?


You cannot a put a password to the wireless card, but you can put a password for the wireless router/modem... You need to login into the router's interface and you need to configure the router by enabling the security.

May 23, 2011 | Encore ENLWI-N3 Wireless N 150 Desktop PCI...

3 Answers

Hello , I am having STC afaq shamel internet modem , model 007 . Can anyone please tell me what is the default password of WIFI of that modem. I restored the default settings of this modem and now i...


Hello ,
I am having STC afaq shamel internet modem , model 007 .
Can anyone please tell me what is the default password of WIFI of that modem. I restored the default settings of this modem and now i cannot place the security in my WIFI.
Can anyone please help me on that ??

May 06, 2011 | Computers & Internet

5 Answers

How do I password protect this router?


You want to set a password for the configuration utility INSIDE the router or set up a password secured WIFI network??
You should eventually do both. Both are accomplished via the web interface. Point your browser at my.router or 192.168.1.1 (if your network is "normal" for a home network).
User ID is admin Password is on a sticker on the router.

Mar 03, 2011 | Linksys WRT160N Wireless Router

2 Answers

How do i put a password on my connection


Hello,
please write your address box the below link,
http://192.168.1.1
Then, it opens your user interface of the modem.
You can manage your modem now.
Find your Wifi Protected Access (WPA) and Pre Shared Key (PSK)
Choose one of encryption techniques. I use TKIP.
Wireless Protected Access with a Pre-Shared Key: The key is a password, in the form of a word, phrase or series of letters and numbers. The key must be between 8 and 63 characters long and can include spaces and symbols. Each client that connects to the network must use the same key (Pre-Shared Key).
Put a password to your connection settings and save it.
I hope this will be helpful.

May 02, 2010 | Linksys WRT54GX2 Wireless-G Broadband...

1 Answer

Bought a Belkin router model # f5d8326 4 v2 was told this worked for cable modems not working yet


Make sure the modem is configured properly so it would detect the router. Most of the time, modems now has DCHP capability, meaning it has the ability to hold the username and password you ISP has provided you. The most effective way of making modems work with routers is to bridge the modem first before connecting the router.

Bridging the modem is done by opening the interface of the modem. To pull up the interface of the modem, type the default gateway of the modem in the address bar of your browser(intenet explorer)

Look for the "connection configuration" button and choose "bridge ethernet" as the connection type.

Once the modem is bridged, connect the router to the modem, then configure the router to set the connection type to pppoe. Once done, type your username and pw your ISP have provided the save the settings. This should cpnnect you online..

May 12, 2009 | RCA DCM425 DIGITAL CABLE MODEM (RCADCM425)

1 Answer

Nat 3


access ur interface of the modem
go to ur command prompt and type
ipconfig | get the defaultgareway | enter that in address bar
username and password should be admin | go to advanced | pinhole
thats how u set up the nat
rate me please !



JULY

Feb 27, 2009 | Netopia (3347NWG-ENT) Router (3347NWGENT)

3 Answers

Default Password


the default password for your westell 327 is username: admin and password: password, the admin admin combination is what usually isp providers such as verizon tells you to put in after configuring it for the first time. 192.168.1.1 is the url add for you to be able to access your westell 327. after accessing your modem you can find the WEP key below the modem, after enabling the security of your network the WEP kep is your default security password

Dec 12, 2007 | Westell Wirespeed VersaLink...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

538 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...