Question about Husqvarna Sewing Machines

1 Answer

I am in the middle embrodiering a design and the machine seems to not have remembered where is was up to when I changed colour

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Husqvarna Expert
  • 104 Answers

Did it go back to the beginning of the design or what? If it went back to the beginning, advance the design through the various color changes until you're back to the one you need. With d-cards, the arrows on the right hand side of the card advance/reverse either the colors or the stiches. I'm not familiar with other models but I'm sure there is a similar provision.

Posted on Jan 22, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Design will not complete resets to start


You did not mention what brand of machine you have. If it is a singer 150-350 turn off the machine and manually move the embroidery unit as far as it will go toward you and to the left, it must move about another 1/4 after it seems that it won't move any further. restart the machine and resend the embroidery design.

Feb 20, 2013 | Sewing Machines

1 Answer

What do you do if your hoop misaligns during embroidery?


you may have to take the machine to a sewing machine shop & have
it checked to see if it needs to be realigned

Jun 11, 2012 | Brother Sewing Machines

1 Answer

Machine embroidery needle changes position


truthfully I think their something wrong with the computer in the machine because
the bobbin locked up. sometimes when a sewing machine jams it can make
the machine jump time.
but the needle moved positions, some part of the machine is changed during the
jam up, even tho you reset it.
embroidery machine are expensive, my suggestion is to have the machine checked

Apr 05, 2012 | Sewing Machines

1 Answer

EMBROIDERY STOPS IN MIDDLE OF DESIGN. PRESS RUN AND IT WILL RUN FOR A SECOND AND STOP AGAIN


Are you sure you are not "double-pressing" the Start/Stop button? The machine might think you have said Go and Stop straight after? Try embroiderying using the foot pedal - see if that works for you. I guess you are aware that the machine will stop for thread colour changes. Do an experiment on any old piece of fabric - load the design and press the Stop button (not the one mentioned above, but the one of the left-hand side above Fix). The light should go out. This will eliminate the colour changes - the design will sew out in one single colour only. See if it keeps running and completes the design.

I would also "park" the embroidery arm, turn off the machine, remove the arm, replace the arm, turn machine back on and try again. Sometimes it just needs to start all over to get things back on track.

Jun 14, 2010 | Husqvarna Designer I

1 Answer

My futura machine when in operation is pulling the bobbib thread up to the picture being embrodiered. what do I need to do to fix this problem, I have purchased new needles, I have redone the bobbins.


Do you have your machine set on E?
Are you using the correct needle for the fabric?
Are you using the correct stabilizer?
I only use the chromium or titanium needles when embroidering, again size according to fabric. There are some great, free guides out there I can point you to if interested.
Are you using embroidery bobbins?
If you answer yes to all of these I'm out of ideas!

Aug 05, 2009 | Singer CE-100 Futura Computerized Sewing...

1 Answer

Futura CE-200 Stops in middle of design and says wrong hoop size


Dear cjnations
Firstly we must all remember that the CE200 is a very particular machine and requires that you follow certain procedures in order for it to run smoothly. When using the small hoop, firstly you must make sure that the small hoop is selected on the screen by going to Tools, Select Hoop & clicking on small frame. Once this has been done and the design selected, you must then attach the small hoop before sending the design to the machine. If you attach the hoop after sending the design, the machine will give you the error message.
Good Luck!

Nov 16, 2008 | Singer CE-200 Quantum Futura Computerized...

2 Answers

Feed dogs


What machine do you have? Have you tried manually raising the feed dogs with the switch? (Need to know which machine you have to help you find the switch.)

Dec 16, 2007 | Husqvarna Viking 1

4 Answers

Husqvarna Viking Designer 1 Beeper


You can't. Believe it or not, it is supposed to be helpful! I know it is annoying though. I have owned my Husky for 10 years and it isn't something you can get rid of.

Nov 17, 2007 | Husqvarna Designer I

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Sewing Machines Experts

Douglas Plant
Douglas Plant

Level 2 Expert

184 Answers

Tally Girl
Tally Girl

Level 3 Expert

1129 Answers

Derek Massey

Level 2 Expert

92 Answers

Are you a Husqvarna Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...