Question about Kenneth Cole KC9004 Mens All Black Automatic Watch

Open Question

Kenneth Cole KC9004 stopped working - Kenneth Cole KC9004 Mens All Black Automatic Watch

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: Kenneth Cole KC3081

Hold the reset button and press the start/stop to go into the setting mode. Then press/hold the start/stop to adjust the second hand and the reset button for the 30-minute one. Then do the reset+start/stop combo again to return to normal mode.
I found this out myself in 5 minutes. Cool watch :]

Posted on Oct 27, 2007

  • 1 Answer

SOURCE: Kenneth Cole KC3754

www.genevawatchgroup.com will come up on google, I got it to come up today, 20 Nov. '07 and clicking on the first heading that came up, "geneva Watch Groiup" I got on and was able to print out a repair service sheet for Kenneth Cole

Posted on Nov 21, 2007

  • 3422 Answers

SOURCE: Kenneth Cole KC1104 wristwatch

Hi,

You can contact Kenneth Cole in the address below:
Kenneth Cole Geneva Watch Co Inc
47-50 33rd
Long Island City, NY 11101
Phone: (718) 729-8600
Fax: (718) 729-8761
They will direct you to their parts department.

Goodluck..

Posted on Apr 05, 2008

  • 2 Answers

SOURCE: Kenneth Cole Reaction watch date set problem

I just dug my watch out after not wearing for a few years and had the same problem. There is an easy way to adust this watch's time and alarm, basically one way to enter both.

1) With the watch in the regular time display mode (doesn't matter if 12 hour or military time), depress and hold the lower left hand button (mode button). After a few seconds the watch appears to shift to alarm mode and it is blinking. This puts you into the mode for adjusting the alarm.

2) If you want to adjust time, date, etc rather than alarm time, after you have done step one, simply press that same lower left button again, and then it will put you into the time mode, but this time the time mode is blinking and you can adjust the various components (seconds, minutes, hours). You can only move minutes, hours, etc forward, no way to move backward. You will start off with the second display blinking, probably skip that unless you need to adjust seconds. Depress the upper right button to shift to the next option (minutes) and you will see the minute display blinking. Adjust the minutes by depressing the lower right button. When finished depress upper right button to move to next option (hours) depress the lower right button to move the minutes/hours/month/date forward as necessary, when you finish just press the lower left button again and it pulls you out of adjust mode and you are back in regular time viewing.

I had to post this because I've had this problem in the past and it killed me. Its kind of intuititve after you get into the adjusting mode by pressing the lower left button- remember, initially it will put you into adjust alarm mode, but press again and you will get into adjust time mode.

Posted on Nov 12, 2008

escapement
  • 2334 Answers

SOURCE: Kenneth Cole Wrist Watch unable to remove link

First you have to find out what sort of pins or even screws are used to keep links together.
Examine both bracelet sides and find the side where pin ends have a groove.
Start with a tiny screwdriver and start to unscrew one of the screws. If it turns, but doesn't come out, that means you have a pins instead.
For removing pins the best would be pin removing tool (approx.5GBP on ebay), but it's possible to do the job without it.
Take a hardened steel needle and blunt the sharp end to the approx. size of pin end diameter using any sharpening stone or sandpaper. Get an old towel and fold it to make a soft base for work (like small cusion). As you don't have a special bracelet holder you will need a pair of helping hands to hold the bracelet steady upright. You will need small hammer and pair of flat nose pliers as well.
NOTE: The pins MUST be driven split end out first, not vice versa. Make sure that the grooved pin ends are facing towel, not the needle and hammer!!!
Now place the watch on the folded towel, take that needle and smallest hammer you have and start driving the pin out using light blows. Do Not hit hard, as you will brake the needle, scratch your watch or even injure yourself. Watchmakers are using 45 gram hammer, so, calculate your strength of blows.
After a few blows check if the split end is coming out and when you see that the end is long enough to grab it with pliers, pull the pin out with pliers. When pulling, do NOT turn pliers, as pins tend to brake when twisted. Use firm grip and your strength to pull the pin without twisting.
After shortening the bracelet,make sure that the pins go back EXACTLY the same way as they came out- the blunt end first in the hole and the split (grooved) end last. Before doing that check remaining pins in bracelet to make sure that you put them back from the right side of bracelet.
It is recommended to use plastic hammer to drive pins back in or you will scratch or damage bracelet. If plastic hammer is not available use an old toothbrush handle (or some plastic item) as an absorber. Simply put pin into the hole as deep as you can with your fingers, put the toothbrush handle on split pin end and hit handle, not the pin.
Make sure that pin ends are flush with bracelet. If needed- hit few more times.
Job done!

Hope it'll help.

Regards

Arthur

Posted on Dec 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is it original or fake?


take to a jeweler and they can tell you right away, press the helpful button and check link below
Reason to Buy Kenneth Cole New York Mens KC9004 Automatic Contemporary...

Jan 10, 2016 | Kenneth Cole KC9004 Mens All Black...

2 Answers

Kenneth Cole KC1104 wristwatch


Hi,

You can contact Kenneth Cole in the address below:
Kenneth Cole Geneva Watch Co Inc
47-50 33rd
Long Island City, NY 11101
Phone: (718) 729-8600
Fax: (718) 729-8761
They will direct you to their parts department.

Goodluck..

Apr 05, 2008 | Kenneth Cole KC1104 Wrist Watch

1 Answer

Unlisted Kenneth cole ul 1069 all other functions work except hands they stopped when trying to set date. what do I do to get hands working again?


your watch has two battery.
one battery for Digital
other one for Analogue
perhaps battery for analogue died
you need to change one battery

Sep 24, 2014 | Kenneth Cole Unlisted Ana-Digi watch

1 Answer

How do o set the time on a Kenneth Cole watch kc1687?


Hi! Welcome to FixYa!

I was able to find a link that details on how to set time on a Kenneth Cole watch. Please on the link: http://www.ehow.com/how_5930839_set-time-kenneth-cole-watch.html

Hope this helps.

Jun 21, 2011 | Kenneth Cole - Ladies Watches - RK4087

2 Answers

Scew missing from band that goes attach to the watch


I would try a local watch repair place first to see if its a standard type pin. If not you will need to follow this advice.
Watches bought from Kenneth Cole or a Kenneth Cole retailer are covered by a limited lifetime warranty. The warranty does not cover repairs needed because of normal wear and tear. You will need :
  • Padded envelope
  • Check or money order for $8.50
  1. Step 1 Write your name, address, phone number and a description of the problem on a sheet of paper.
  2. Step 2 Put the watch and the paper with your information in a padded envelope.
  3. Step 3 Mail your package to:

    Kenneth Cole Productions Inc.
    Attn: Returns Department
    229 Hollie Drive
    Martinsville, VA 24112

Aug 09, 2010 | Kenneth Cole Watches

1 Answer

My watch simply stopped working. It refuses to work regardless of how much I wind it. Where can I go to get it fixed?


www.watchrepairusa.com/kenneth-cole/watch-repair
The best place to send a watch is to the original vendor as they can keep any warranty in tact also. KC has a great watch repair.

Jul 15, 2010 | Kenneth Cole Automatic KC3773 Watch for...

1 Answer

Cracked glass on the dial


I have no idea how the things work in India, but any Kenneth Cole dealer shop must be able to sort your problem ( at least it is worldwide experience ). So, visit your nearest Kenneth Cole store and ask for help.
Do not forget to rate, please.

Feb 06, 2009 | Kenneth Cole RK5034 REACTION

Not finding what you are looking for?
Kenneth Cole KC9004 Mens All Black Automatic Watch Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenneth Cole Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Jimmy Accardi

Level 2 Expert

101 Answers

TIC TOCK SERVICE
TIC TOCK SERVICE

Level 2 Expert

61 Answers

Are you a Kenneth Cole Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...