Question about Nokia IP 260 (2 Pack) (NBC0260000) Firewall

1 Answer

Nokia IP 260, allowing a remote office having a direct connection

Hi
We have a Private WAN Frame Relay connecting all our office. We have the Nokia IP260 in the central head office (Nokia LAN IP Address 192.100.100.250). The local LAN users with in head office can comminicate directly to the IP260. However we will like to the remote offices (IP Address 192.100.105.254/24) to be able to access the IP 260. I have already added a static route in the
Voyager, and allowed a rule within checkpoint for the IP range 192.100.105.x, but the remote office still dosen't have access. All help will be appreciated. thanks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

You should disable NAT between your local networks in the Checkpoint NAT policy (Create a NAT rule above all and put all your networks in the source and destination - as a group)the leave Original in the translation column.

Posted on Feb 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

3crevf100-73


Configure the 3COM to direct all incoming 3389/TCP traffic to 3389/TCP on the "private" IP-address (192.168.xx.yy) of your server.
Configure your server to "allow" Remote Desktop connections, and add the ID/password details that will be allowed to login to your server.

Apr 23, 2014 | 3Com OfficeConnect (3CREVF100-73-ME)...

2 Answers

How to connect my MSSQL server through VPN by using PPTP


192.168.1.X is a local ip address ,, i trust that thhe vpn is in seperate places and is done with the wan ip over an internet connection?????

OK maybe the problem isnt on your side but the main office building,, when connecting , have someone looked for repeated attemps to connect by observing the fire wall,, if it appears to be blocked byu the firewall simply diasable any and try it out.. If it works then all you need to do is set the firewall correctly..

I was reading the ip address in your original post and those are local address,s are you certin the VPN is correct ???? did you use the correct STATIC IP ADDRESS ASSIGNED BY YOUR ISP??

Jan 20, 2008 | Cyberguard SG300 (00852503000366) Firewall

1 Answer

Wan ip not pinging


There may be some problem in your net connection or problem in that ip.Check your connection again and then do ping for some familiar ip's like Google,Yahoo,and so on in cmd.If it works well,check with the IP you need.If it shows the same error again,then sure the problem is on the Ip.You can do ping in cmd by typing ping website name.You can also do ping test at Whoisxy.com .

Mar 26, 2013 | SonicWALL TZ 210 (01SSC8786) Firewall

1 Answer

Linksys router problem


This sounds like a route problem. This can happen if the settings to the WAN are correct. If you are using a dialup DSL router check to make sure that it is connecting to your ISP. Same for a cable modem. Once you have verified that it is connected properly then set your WLAN gateway to point to the WAN IP number. if you are using DHCP for IP addressing for your wireless devices make sure that the gateway address is set correct also. Check DNS settings sometimes the ISP's DNS servers are not setup correctly or are not stable try using googles free DNS numbers of 8.8.8.8 or 8.8.4.4

May 28, 2012 | Linksys E1200 Wireless Router - Ieee...

2 Answers

I have two Cisco routers one is a 501Pix(located at branch Office), the other is a 515E Pix (located at main office). I've configured a vpn tunnel to the router at the main office. The router at the branch...


Hi,
  1. Please check whether the Tunnel Phase 1 and Phase 2 are Up.If Not Proceed Next, if Yes Proceed to point 4
  2. Please check the peer IP is reachable
  3. Please check the configuration and the encapsulation method used
  4. Check whether in the Match Address whether the IP has been Allowed If Yes Proceed Next
  5. The Branch PIX will be in the Outside interface of the Main PIX, security Level will be enabled so do NAT. If Yes Proceed next
  6. If unable to ping enable the Inspect ICMP in the global policy to enable ping If Yes
  7. If all The above are done. please check the routes between the 2 remote computer.
Please check all the above point, surely your problems will be solved

Feb 26, 2011 | Cisco PIX 501 Firewall

1 Answer

I need to add an ip range to my sonicwall tz 170


This is not directly possible to do with a TZ170 as the device will only allow configuration for 1 static or dynamic IP at a time for the WAN port.

However this being the case, I suggest setting the SonicWALL up as a perimeter firewall and place devices that require the other public IPs form the additional IP range behind the TZ170. Basically the SonicWALL becomes the gateway for the other IPs needed as long as the range of the IP block is contiguous.

This would involve using the 4 ports of the LAN on the back of the TZ170 to connect directly to the other devices or if it is more then 4 devices, using a switch connected to the LAN side of the SonicWALL to provide connectivity to the multiple devices behind it. Most TZ170 are licensed for 10 connections on the LAN side and if you require more then 10, additional licenses will need to be purchased.

I would be careful pushing too much traffic through a TZ170 as it is designed for Small Business use and will quickly become overloaded with too much traffic causing high latency/traffic bottlenecks and in extreme cases connections being dropped. This is especially true for multiple VPNs.

Jan 23, 2010 | SonicWALL TZ 170 SP Firewall

1 Answer

DFL-260 Fierwall setting for Static IP


All of these info below are available in the owner manual that you can download here :
D-LINJK DFL-260 Firewall

You can either do it true command line or with the web interface.

Apr 09, 2009 | D-Link NetDefend DFL-200 Firewall

1 Answer

Private network > VPN > network firewll > priv net


Add a static route on the Sonicwall 2040 : 192.168.1.0/24 with the RV082 as gateway (the ip of the network shared between the RV082 and the Sonicwall)

Another solution is to enable NAT on RV082 for 192.168.1.0/24 network. Routing is preferable.

Feb 14, 2009 | Linksys RV082 10/100 8-Port VPN Router...

2 Answers

I need configuration aid for the DFL-210


Dear Sir/Madam,

Please check this link for more details. It may be help you.....



ftp://files.dlink.com.au/products/DFL-860/Manuals/NetDefendOS_2.12_User_Manual_v1.05.pdf

Thanks


Don't forget to rate the solution

Mar 06, 2008 | D-Link NetDefend DFL-200 Firewall

2 Answers

Sonicwall Pro 300 DMZ Problem


If you're within a network and try connecting to computers on it with the WAN public IP, it simply won't work - you must use the network IP. On an external Internet connection, it should connect fine to the public IP. If you have access to an external machine (remote desktop), or if you know of an FTP proxy, you can try it that way. I also believe http://www.webftp.co.uk/ a web based FTP client would act as somewhat of a proxy, you could try that with the public IP and see how you go.

Aug 09, 2007 | SonicWALL PRO 300 Firewall

Not finding what you are looking for?

Open Questions:

0 Answers

Not able to connect to Smart server through Dash board Hello, Let me briefly tell the details of problem. Recently I changed the IP address ( EXT) provided by our ISP on ext interface of the Nokia appliance. I followed below steps. Login to the Dashboard via your Internal IP address 2. Define external IP address for the Firewall object. 3. Login to appliance via voyager (Internal IP)change the external IP address. 4. Change the default routes. 5. Login to dashboard and get click the button get "Interfaces with topology" or you can manually change the IP address. 6. Push the policy. After this I see that Internet access is withdrawn and no access to internet and other firewall located at USA. I restored the old IP address in Nokia and Check point also and power off and powered on (thorugh power button) and I got access to Internet and VPN all apllications started running, but problem occured with dashborad connectivity with smart server, we have NOkia IP 260 with Check point R55. We have done basic truoubleshootng with Nokia applicance and loged call with Nokia TAC. The error message is " connection can't be initiated, please make sure the server is up and running and that you are defined as GUI client". As R55 is outof support hence Check pint TAC is not able to provide solution. I tried running cpconfig and cpstart command in hyperterminal of Nokia but it says command not found, I am very perplexed and not sure what is wrong can any one advise ,what is over looked or what is the solution of this proble, I shall be highly grateful on your support. sincere regards, Manoj Network Admin

Apr 22, 2009 | Nokia IP 260 (2 Pack) (NBC0260000)...

Nokia IP 260 (2 Pack) (NBC0260000) Firewall Logo

Related Topics:

299 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nokia Network Security & Firewall Devices Experts

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Ann Moroz
Ann Moroz

Level 2 Expert

82 Answers

Are you a Nokia Network Security and Firewall Device Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...