Question about Hoover Dryers

Open Question

Hoover nextra 8 manual hnc 382 t repair manual required

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

canwoodjc
  • 3301 Answers

SOURCE: i have a hoover nextra

the filter care light comes on when the machine is over heating so the "brain" thinks the lint trap is full , clean the entire venting system, including the outside vent cover and remove any debris , then unplug the machine for a few minutes and see if it resets

Posted on Jul 04, 2011

hards327
  • 30 Answers

SOURCE: How do i replace belt on condenser tumble dryer

you need to remove the whole front of the machine by removing the : top by the 3 screws at the back,then unscrew the screws across the front of the top of the bezel then remove,then open the door,remove the circle of screws then put the machine on its back,remove the screws at the bottom front of the machine,then lift the front bottom of the machine and slide it upwards then you should be able replace the belt then refit in reverse order good luck.

Posted on Mar 17, 2008

vickygomar
  • 460 Answers

SOURCE: Noisy when running need to check belt and bearings

i need the serial # to assist you better 
thank you

Posted on May 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

5 Answers

User's Guide HOOVER HNWL 7146 Nextra 6 Washer Dryer


Hi if you give me your email address I will send you a nextra 6 user guide

Dec 01, 2011 | Washing Machines

1 Answer

I have a hoover nextra dryer hnc 170. The drum will not turn, and both the lights for filter care are on. I assume the reason it is not turning is because of the filter care light. Is there anythin i...


the filter care light comes on when the machine is over heating so the "brain" thinks the lint trap is full , clean the entire venting system, including the outside vent cover and remove any debris , then unplug the machine for a few minutes and see if it resets

Jul 04, 2011 | Dryers

2 Answers

Hoover Nextra 6 1400 6+4kg - the tumble dryer


under top cover there are 2 thermal cut outs to reset.situated centre front

Sep 12, 2009 | Hoover Nextra HNWL 3136 Front Load Washer...

1 Answer

We are looking for a Programme Selector for a Hoover Nextra HNWL 3136


hi there my best advice is phone gias in rochdale go to gias website for number when you ring tell them you repair washing machine so you get a trade price

Jun 23, 2009 | Hoover Nextra HNWL 3136 Front Load Washer...

1 Answer

Noisy when running need to check belt and bearings


i need the serial # to assist you better 
thank you

May 14, 2009 | Dryers

1 Answer

Hoover Nextra 8 dryer making a squealing noise


you have to open the dryer and lubricate the rollers, these are the parts that normally make the squealing sounds.

tnx 4 using fixya,

drcool

Oct 07, 2008 | Dryers

1 Answer

I have just started to fit a new hoover nextra 8 washer dryer following the instruction to the letter. When tipped up to remove internal packing, the base was missing, the internal packing did not exists...


photograph everything
contact the dealer with photographs
contact hoover with photographs
do not attempt to self repair, they are demons on warranty exclusions

Aug 22, 2008 | Hoover Washing Machines

1 Answer

How do i replace belt on condenser tumble dryer


you need to remove the whole front of the machine by removing the : top by the 3 screws at the back,then unscrew the screws across the front of the top of the bezel then remove,then open the door,remove the circle of screws then put the machine on its back,remove the screws at the bottom front of the machine,then lift the front bottom of the machine and slide it upwards then you should be able replace the belt then refit in reverse order good luck.

Mar 14, 2008 | Dryers

Not finding what you are looking for?
Dryers Logo

Related Topics:

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Dryers Experts

Tim Whalen

Level 3 Expert

3072 Answers

yadayada
yadayada

Level 3 Expert

75030 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Are you a Hoover Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...