Question about Proform Power 995 Treadmill

Open Question

Treadmill belt curled on edge

The edge of the belt is slightly curled and rubs on plastic making noise

Posted by Anonymous on


5 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: my treadmill makes noise every 30 seconds when

We took it apart and cleaned it :-)

Posted on Jan 29, 2010

  • 832 Answers

SOURCE: I have a Proform 380 Treadmill. When the treadmill

If the walking belt is off-center, first remove the key and UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the allen wrench to turn the left rear roller bolt clockwise 1/2 of a turn; if the walking belt has shifted to the right, turn the bolt counterclockwise 1/2 of a turn. Be careful not to overtighten the walking belt. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is centered.

Posted on May 24, 2010

  • 832 Answers

SOURCE: ProForm 380i Treadmill: How to repair frayed edge of Walking Belt

Discription: WALKING BELT W/FASTENERS, Part # 193575, Model # PCTL49820, Price $48.83
In humble opinion you should replace the part, it sounds like an accident waiting to happen Call Icon Fitness @ 800-999-3756 and give them the info above.

Posted on Jul 19, 2010

  • 12223 Answers

SOURCE: My proform crosswalk treadmill makes

Of course after you did step and the problem persist, you must test the main motor complete, mechanical and electrical trouble.

Posted on Nov 15, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My dell 2350 dn feeds to much paper causing jam

Step 1: Try fanning the paper at the feed edge before placing it in.
Step 2: Ensure that the paper is placed in with the edge curl up. When holding a bunch of paper between two fingers, the paper will naturally have a curl to it. It should be placed in "happy" (Edges up).
Step 3: Inside the printer's paper tray and where the feed mechanism is, locate the feed rollers and static feed pad. These will all be rubbery or "foam"-like. They should always be slightly tacky when rubbed against, however paper dust will eventually cause them to become slippery instead. Rubbing alcohol can be used to clean them with care and a Q-tip and recover the slightly rubbery, tacky feeling, thus resolving misfeeds.

Mar 28, 2014 | Generic Laser Compatible Dell 2330 2350...

1 Answer

I've taken the drive belt off my roger black silver treadmills and when I turn the motor pulley by hand every .75 of a turn it offers slight resistance with a scraping noise

Must be rubbing on the walking platform check the rollers is on right and tight up belt to motor and not to tight other wise motor will strain

Nov 17, 2013 | Exercise & Fitness

1 Answer

Can the plastic sheet under the walking belt be purchased . My belt is making a "squealing" noise as it is rubbing off the plastic sheet,which has become "pitted" and worn,This plastic...

we named this sheet deck and it is not plastic but it is wood coated MDF you can measure it and buy any wood shop.
we would be glad help you by smartphon contact us 00989195116738

Sep 10, 2011 | Proform 790T Treadmill

1 Answer

My v fit los angeles 2 treadmill belt is slipping not sure if it is the running belt or the drive belt causing the issue?

Might be both.

Generally, with your drive belt, you should be able to twist it over 45 degrees but no more than 90 degrees.

Then with your running belt, you can increase the tension by tightening evenly both sides. Do it gradually by half turn increaments, and test. If it "curls" on the edges, it is too tight.

Hope this helps.

Mar 04, 2011 | Exercise & Fitness

1 Answer

I have a used Weslo Cadense 927 treadmill. I need to adjust the the tread, it's rubbing the side.

When you purchased the treadmill it came with an allen wrench to assemble the machine. That is the adjustment tool.
Inspect the rear plastic cap (the adjustment bolts are there) make sure it is not damaged. If the plastic is broken, it will need to be replaced. This job is not easy. If it is not broken, adjust the belt as follows..
If the belt is already rubbing, locate the adjustment screw at the back of the treadmill on the side that is rubbing.Adjust that screw tuning it 1/2 turn clockwise. Move the belt manually 3 full rotations.. If it is still rubbing, turn another 1/4 turn. Again move the belt manually 3 rotations. Once the rubbing stops, run the machine slowly and watch the belt from the back of the machine..

Dec 16, 2010 | Cadence Weslo 927 Treadmill Walking Belt

1 Answer

Belt makes noise, like it is scrapping something!

Do you have a three year old in the house?? Our ProForm 795 treadmill started making noise when the belt was rotating. Come to find out, he had hidden a plastic clothes hanger inside where the drive roller spins the belt. That was our scaping noise.
Otherwise, is your belt tensioned correctly? If not, it could be tracking to one side or the other.

Nov 17, 2009 | Proform Crosswalk 500 Treadmill

1 Answer

While running on the treadmill there is loud noise

Probablt don't need a new belt. You need to isolate noise. Listen and look for any signs of rubbing in the area that noise is comming from.

Jul 27, 2009 | Stamina Products InMotion Treadmill

1 Answer

Tread is sliding and rubbing agianst right side of track.

Make sure treadmill is running when you adjust belt. The treadmill belt tracks as the belt goes around. I usually put machine on 2-2.5 if belt is not rubbing instantly. If belt is already against plastic, turn adj. counterclockwise on the opposite side about one full turn. You can usually move belt with your foot to see if it aligns any with turning on the treadmill. Once belt is not rubbing, turn treadmill on and continue alighing the belt.

Jul 20, 2009 | Nordic Track NordicTrack Treadmill, A2550

1 Answer

I hear noise in my new treadmill

where did you buy the unit. you still be under warranty. noises are funny sometimes, you think it is hear but then its over hear. There will be noise fron under the belt that is normal. sometime it is louder in a house then in a store. you may need some waxon the deck as well. culd be plastic rubbing in the belt.

Apr 11, 2009 | FreeMotion Treadmill t7.3

Not finding what you are looking for?
Proform Power 995 Treadmill Logo

Related Topics:

570 people viewed this question

Ask a Question

Usually answered in minutes!

Top Proform Exercise & Fitness Experts

Ross Metcalfe
Ross Metcalfe

Level 2 Expert

128 Answers

Matt Olenzek
Matt Olenzek

Level 2 Expert

293 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Proform Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides