Question about Toshiba Tecra 8000 Notebook

1 Answer

Changing power outlet on pc

How do i take the tecra 8000 apart to change the power outlet

Posted by on

  • jtcrook Jan 13, 2009

    i want to change where you plug the power supply into

  • DEKR
    DEKR May 11, 2010

    Do you mean changing power supply

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toshiba Master
  • 2,404 Answers

Take out all of the screws on the bottom. Remove the hard drive and the dvd drive. Take out the keyboard, take out the screws from the top cover, remove the screws to the lcd assembly and take that out and any wires that are connected to the lcd.

Once this is done then take the top cover off and make sure you disconnect the ribbon cables before taking off the top cover.

Then after taking off the top cover remove any screws holding down the motherboard. After you get the motherboard out then find where the dc jack is and then you can either change it out with a new one or resolder the exising one back into place.

Then when your done you can put it back together again.

Posted on Jun 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am trying to reboot my computer


you should call your costumer support for recovery disk.
it will work.

Jun 03, 2010 | Toshiba Tecra 8000 Notebook

1 Answer

Toshiba Tecra 8000 Laptop has been stored for 1 year, never had a password, now when turned on just sits there asking for a password, pulled it apart and disconnected 2? batteries but made no difference


Try accessing the BIOS screen when it boots up by pressing either the ESC or F1 keys repeatedly and there should be a password or supervisor password section where you can disable all the passwords.

Mar 05, 2010 | Toshiba Tecra 8000 Notebook

1 Answer

How do I switch from battery to power on my Toshiba Tecra 8000?


Mama,
You do not have to switch from the battery to power as long as the powwr adapter is plugged intp the wall socket and the laptop. When the battery goes low it starts charging while running the laptop and when not charging it runs the laptop alone. I hope that relieves you of your worries?

Nov 05, 2009 | Toshiba Tecra 8000 Notebook

1 Answer

The power was turned off. Now get a warning: system resume failure. What to do to restart?


When you get the resume failure message, push and hold the power button until the unit turns itself off (usually around 5 seconds). Once it is turned off, press the power button again to turn it on and it should boot right into windows for you.

Jun 03, 2009 | Toshiba Tecra 8000 Notebook

1 Answer

My toshiba tecra 8000 will not power on


What you need to do to test this is the following:

1 - Check if its the battery : Remove the battery, plug in the laptop and try to power on the machine, if it powers on then your battery is dead and the system board is fine

2 - With the batter in and the laptop plugged in you should get a charging LED light up somewhere on the laptop, if you do not then the board is most likley gone.

If removing the battery and plugging the laptop in still fails to start the board of spin the fans and you hear no beeps, then the board is gone.

Hope this helps

May 26, 2009 | Toshiba Tecra 8000 Notebook

1 Answer

Tosiba Tecra 8000 (reset Button)


Do you mean like bringing the computer to the (OOB) out of the box state?
If yes you need to know if your notebook came with a recovery cd or HDD partition
you can visit pcsupport.toshiba.com
You need to have your product number.

Sep 11, 2008 | Toshiba Tecra 8000 Notebook

1 Answer

Wirerless


toshiba tecra 8000 does not have built in wireless, you need to install an external wireless adapter (usb or pcmcia), and use the software provided with the wireless adapter to configure it

Jul 06, 2008 | Toshiba Tecra 8000 Notebook

1 Answer

Tecra 8000 PCMCIA driver XP


wooe

i have an old Tecra 8000 happily running XP picks up everything IRDA,sound and PCMIA Ethernet card. i used a 3com one

Apr 19, 2008 | Toshiba Tecra 8000 Notebook

1 Answer

Upgrading my tecra 8000 mother board


You don't have to change or replace your motherboard ..

just go to toshiba website........select your model by its serial No. and download the all available Drivers like Sound, Video, bios, management etc.....

install all these Drivers on your Laptop......... your motherboard will be up-to-date.

Mar 19, 2008 | Toshiba Tecra 8000 Notebook

Not finding what you are looking for?
Toshiba Tecra 8000 Notebook Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba PC Laptops Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

john smith

Level 2 Expert

366 Answers

Are you a Toshiba PC Laptop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...