Question about LG WD-12126RD Front Load Washer / Dryer

5 Answers

LG Intellowasher 7kg WD-14125RD shows DE error

I have an LG Intellowasher WD14125RD and there's a DE error message and doesn't start a cycle.After starting any program the DE error comes on, the water starts running but after a few minutes stops, the drum doesn' turn, and then the miachine turns off - the DE error stays on, what can be wrong? where can I find a manual?

Posted by on

5 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Thanks

Posted on Jan 31, 2015

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Your washer machine works fine it's a position problem of the drain hose. LG official solution:
dE is drainage failure this means that the water will not be drained when drain hose is not correctly connected. Please see the image in this link of official LG site: LG Help Product Support and Troubleshooting LG Africa
Other error codes and solution you can find here:
Product Support

Posted on Jan 27, 2015

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

For all those who have LG machine and donot have a match for the door especially top loading this de error means the magnet of ur door is missing which right in front of u in a plastic mould . Search for it in the machine or else attach a new magnet . This is again only for top loading fully automatic without latch door LG model wf t7066mn. Thanks

Posted on Sep 08, 2014

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 66 Answers

Problem with the door switch. kindly check door switch ,same harnest door swich & drain motor. if door swich is ok. drain motor & door swich wire might shorted.

Posted on Mar 14, 2014

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • LG Master
  • 9,472 Answers

DE is for a door lock error and you will need to replace the lock. Here is the part to order.

Posted on Dec 07, 2012

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 6277 Answers

SOURCE: I have a LG Intellowasher

Hi from retired Englishman in SW France,
'dE' stands for 'drain Error'.
I would gently suggest as a first step that you clean the drain motor/pump lint tray/filter. So many 'faults' are caused by blocked filters and many machines will not even go to rinse or spin or release the door lock if there is any water still left inside.
Following are my complete and generic guidance notes for checking both the drain motor filter and the drain motor ;-0)
REMOVE POWER AND ENSURE YOU HAVE A WATER RECEPTACLE/RAGS TO SOAK UP THE WATER WHICH IS BOUND TO POUR OUT (alternatively use a wet vac as sensibly suggested by VinnyB1234!)
If you are unsure where the filter is, it is often behind the front lower (kick) panel (or in some machines at the rear in an awkward position!). These panels are either held on by (plasic) screws or will just pull off. Most filters are held in by a round cover/knob. Sometimes the filter will not come out with the cover and you will have to persuade it to come out to play.

It's surprising what people have found in theirs! It is always worthwhile checking it on a regular basis.
Now- whilst the filter is removed it is normally possible to see the drain motor and ensure it is not jammed by a foreign object such as a needle or a toothpick. It should be able to be turned by hand/finger- the power IS OFF!
At this point it is also possible to test if the motor works. No clothes or water in the machine, select a spin cycle and put the power back on. You should be able to see the motor turning at some point, possibly straight away. Using something suitable like a glove see if it is easy to briefly slow the motor down. If it is easy then the motor is malfunctioning.

If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck!
John C

Posted on Aug 01, 2011

  • 4 Answers

SOURCE: my washing machine turns on but will not start. It will only make a click sound then another click sound. Please help

Your timer swicth is defective or fuse inside but check first the cord if it not broken before you go to fuse and timer

Posted on Jun 15, 2012

  • 1 Answer

SOURCE: my lg intellowasher 7kg WD-1059 FB will not pump

Pump motor is probally shot, Mine is 4 years old I'm replacing mine again. Yes I've replaced it twice

Posted on Feb 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

LG Intellowasher WD-8026C having problems with the door latch, I keep getting an error message. Latch appears not to be connecting and locking the door. to start the machine.


The DE error or fault code indicates that the door is not latching properly. Check the lid or door operation to be sure it's not binding and that the door alignment is correct. Also, check the door/lid hinges to be sure they're not binding. Finally, make sure the door catch is in place and not broken. You may need to replace the door hook/catch or the door lock assembly

Jan 31, 2015 | LG Washing Machines

1 Answer

LG intellowasher 7kg wd-8015c


SURE VINEGER IS VERY GOOD ON CLEANING WASHER

May 02, 2014 | Washing Machines

1 Answer

My washing machine turns on but will not start. It will only make a click sound then another click sound. Please help


Your timer swicth is defective or fuse inside but check first the cord if it not broken before you go to fuse and timer

Jun 15, 2012 | LG Washing Machines

1 Answer

My LG INTELLOWASHER 7KG 1460FHD stops after 3 min of trying to fill and go back to the start a message came up of LE


Hi from retired Englishman in SW France,
'LE' stands for Lock Error. There is likely to be a problem with either the door solenoid/lock or the 'door closed' sensor requiring a service engineer's attention I suggest ;-0(
If this has assisted and/or clarified the situation for you please consider a 4 thumbs up on our rating.
Thanks and good luck!
John C

Jun 22, 2011 | Washing Machines

2 Answers

LG INTELLOWASHER DD 7KG


You may need to have the door switch replaced but before that should be done, make sure the wire connector is securely in place.

Sep 02, 2008 | LG WM1814CW Front Load Washer

Not finding what you are looking for?
LG WD-12126RD Front Load Washer / Dryer Logo

2,387 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...