- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
for heavy machinery cars etc. luckily there are many websites
that can help you repair
for eg site like reliable-store is very active in this.. instant help, emails and all that's fantastic
tried and tested !
That number is the signal strength indication. IF you get four beeps when that shows up and it could be E instead of 8, the unit has detected something wrong.
hello my name is kenrik. About a year i bought a radar detector everything work good for like 8 month after that my radar don't make any detection i went by a cop using a laser gun and the radar didn't detect anything so what i can do ? the model is cobra xrs 9345
Press and hold Dim and City buttons for four seconds
Voice Response with say, "Pop On" or "Pop Off"
Tone Response will be, Pop On = Two Beeps, Pop Off = One Beep
You can find the full manual here:
http://www.manualnguide.com/manual/cobra-xrs-878-manual/
It should alarm to known locations such as door openers as these operate on the same band as police radar (X band and sometimes K band). That model is no longer serviced but you can trade it in for a newer more powerful Whistler however. For more information contact whistler at [email protected]
replace the speaker cobra sells them for a few dollars 773-889-3087 or cobra.com also if you want a new detector you can send your old one in and they will upgrade to the next higher model at a good discount ( a lot cheaper than buying through the stores . the speakers are easy to install just plug in no soldering required .
I looked at the 9700's instruction manual, and I could not find any method for resetting the 9700 to its factory default settings. My guess is that the display has failed since there are several other posts for various other Cobra RDs where the display suddenly stopped working.
×