Question about Toys

1 Answer

Aeroquest gold edition 3channel heli lost one of the upper control buckles can't find any rePlacement parts???

Posted by on

  • 1 more comment 
  • brian mcdonald Dec 28, 2012

    I am not sure if you are referring to the piece that looks like a chain link that connects the stabilizer and the upper rotor blade,I have also lost that part. If you find and place to buy the part, please e-mail me at brianmcdonald@wideopenwest.com. Our only option may be to take it back to HD.

  • Peter Tonderys Jan 17, 2013

    I'm looking for the blade itself

  • ronald May 18, 2013

    I too am looking for the same part, I may try a bread tie.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Ya the manufacturer sent out many missing that part. It's a cheap rip off company that pulled a fast one on everyone that bought these. I've bought 2 (both missing that connector) and one was previously used and broken. I recommend to everyone who bought one of these to return them

Posted on Jan 06, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Aeroquest Gold Edition Helicopter (item no 50830) - Channel switched by accident


bottom rotors are both B rotors and A rotors on top. had the same issue and now in flight

Dec 26, 2012 | Toys

1 Answer

The waste buckle on my ergo baby carrier broke. I don't know how to go about getting it replaced.


Replacement buckle for your model can be found on amazon. Click here and take a look: Amazon com Ergo Baby Carrier buckle. I hope this was helpful. Cheers

Oct 09, 2012 | Ergo Baby Carrier

1 Answer

My helicopter will not hover!


If I understand what you're describing, the heli will fly properly at the start of each flight then becomes non-responsive and crashes. When you begin again, the same thing happens.

If that's correct, then it sounds to me like the heli is flying out of range of the transmitter. Check the batteries in the transmitter. If the batteries are ok, then check the distance to be sure you're staying within range. If you are within range, are you remembering to turn on the transmitter before connecting the heli battery? Did you properly bind the heli to the transmitter? Any other flyers in the area that could be causing interference? Power lines nearby?

Another thing, if it does fly out of range, and if your heli is properly trimmed, it should stop and hover. If it's not doing that, then check that your controls are in the proper position before connecting the battery.

Hope this helps.
Randy

Please remember to rate my response.

Aug 08, 2012 | Align T-rex 100x Microhelicopter Super...

1 Answer

I lost my serial number for grand ages rome: gold edition, do you have one


I'm sorry but this is not a warez site...We do not give out activation keys or access codes.

Jul 14, 2012 | Viva Media Grand Ages Rome - Gold Edition...

1 Answer

9053 bottom blades


Have the same problem with my S107 heli. I determined it's in the speed control hooked to the gyro control. This control feature helps keep heli
from turning in flight caused from tork. The lower blades are the ones
that speed up slow down to keep heli orientated. I'm replacing the control board.

Dec 16, 2011 | xheli 9053 Outdoor Volitation Metal...

1 Answer

Just bought an S107G. I have brand new batteries in the controller, and the heli is fully charged. The light on this controller when turned on is solid red at all times (should be green right?) The...


Do the lights on the heli come on?

Normal start-up would be:
Turn helicopter on. Flashing light in nose should come on, as well as another blinking light (sometimes towards the rear, sometimes in the "cockpit" area) the helicopter MUST then be placed on a level stable surface until the 'other' light stops blinking, usually a couple/few seconds. This is the gyroscopes synching up and determining the "level" head orientation they will be maintaining. Then power the controller on. Making sure you're not covering the front of the controller with your hands, (the IR signals come out the front like a TV remote) push the throttle control (left joystick) up until the blades move. This what the horribly translated instructions mean by setting the helicopter and controller together.
Don't charge with the controller. It kills your controller's batteries, (which will last nearly forever if you don't use them as your heli's charger) and seems to make the birds act weird. Use the USB charger and a fully powered USB port (back of your desktop, not the front) and go by the light on the charger not an arbitrary time. Plug in charger NOT connected to heli. Look at the light. That is what the light will look like when unit is fully charged. Make sure heli is off. Plug into charger. Charge until light is fully on. If you unplug heli and the light gets brighter, it's not charged fully. A weak USB port (on a laptop or the front side data port on most desktops) may take several hours to achieve full charge. Always cool 10 mins after charging AND 10 mins after flying. Never drain fully, it will kill the Li/Po battery. Land and power off as soon as you can't maintain altitude.
If it is really charged, and you turn it on and nothing happens... no lights nothing. Then it's defective/toast. Return for refund.
These SYMA helis are awesome, and HANDS DOWN the best on the market... but they can be picky/tricky on how they are treated.

Please let me know if this helps.
PvT

Jul 27, 2011 | SYMA Toys industrial New Syma S107 Mini...

10 Answers

My S107 does not hover very well. It moves in a large circle on its own. It isn't the trim as it doesn't spin around the axis of the rotor. It points in the same direction but slowly moves left, back,...


The upper shaft 'T' head has a broken pin in it (the part that holds the blades. You can flip the heli upside down and slightly rotate the blade housing back and forth and IT SHOULDN'T do that. Another way to instantly identify it is dislocate the rotor head links and the upper blade housing should instantly separate) It's made of plastic.

Anyway, It's also called the "T.B.E." Toilet Bowl Effect. It's not 'really' what's taking place, it's move of a cyclic issue but the effect looks like it's swirling in a toilet bowl... You need to replace the inner shaft basically on the upper rotor. They cost anywhere from $4-7.00 bucks. It took me about 2 days of researching and purchasing another one to finally figure it out. There was another website that says the balance bar is it or the gyro has gone bad; this simply isn't true.

Cheers!

Jan 05, 2011 | SYMA Toys industrial New Syma S107 Radio...

1 Answer

Heli will not climb above ground effect, battery tests ok, axles in balance no vibration, just will not climb


I also have this kind of problem with my apache. The upper propeller must spin faster thatn the lower propeller if not the heli would just spin on its tail although maximum power is achieved. The solution is to check the connection of the gears and the axle of the upper propeller which is located at the bottom of the helicopter. remove first the battery pack to see clearly the connection. try to turn the upper propeller a few turns and see if the axle, gear and the metal connector is sliding. A fixed my heli buy putting a permanent glue on the axle, connector to the gear and whalla. it does not slide. Most problems of this model is the gear of the upper propeller, often times loosened specially during crushes. This will a lot help you as your heli would have power on the upper propeller for lift off. Happy flying.

Gerry1abe.

Mar 07, 2010 | Apache Colco Ah 64 Longbow R/C Helicopter

1 Answer

Nephew lost directions for charging


make sure both heli and controller are off and batteries are new and then plug wire into heli and then turn controller on it doesnt matter abc, abc is just the frequency to controll heli just match with the letter under the heli

Jan 04, 2009 | Air Hogs Havoc Heli Helicopters

Not finding what you are looking for?
Toys Logo

Related Topics:

1,437 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toys Experts

kakima

Level 3 Expert

102366 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

15641 Answers

Are you a Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...