Question about Mitsubishi WS-65513 65" Rear Projection HDTV

1 Answer

Connect Macbook Pro to Component input

Tried PC input, but something is wrong with the PC input card on the back of the TV. Even without a connection hooked up, the screen is all fuzzy and messy.

Trying DVI-VGA (came with Macbook) cable: VGA--> Component-1 on back of TV. Can't seem to get it to work.

Is the PC input my only option?

Posted by on

  • B U Jan 12, 2009

    Ok... it is hooked up properly. So what are hte proper NetCommand settings? I feel like I have tried everything!



  • B U Jan 12, 2009

    Yeah, I tried that too. I reset all configs on the TV, connected the VGA to Comp-1 input, and when I switch to the device from the remote, there is nothing but the blue screen.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 233 Answers

You should be able to use an SVGA to component rca connector on any component input - i have a wd-65513, and thats how I have my pc hooked up to it. I could also never get a clear picture using the SVGA plug on the back of the set.

Posted on Jan 12, 2009

  • Josh Crager
    Josh Crager Jan 12, 2009

    there will not be any netcommand settings - this is only for using the tv to control a component via firewire. All you need to do is go into the setup menu and turn the input you are trying to use on, and label it computer or whatever..check the tv's owners manual. if you dont have one I can email you one in a PDF file.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I HAVE A MITSUBISHI WS65815 HOW DO YOU PROGRAM THE DVD TO WORK WITH THE TV?


You should not have to "program" it. If DVD is HD connect it to the DTV input on the back of the set--if not HD DVD unit connect it to one of the other COMPONENT inputs the set has---

Component will have RED, GREEN AND BLUE INPUTS, for picture plus a red and white for audio---Component requires 5 connections.

Once you have the wires plugged in so they are the same at both the set and the player--you use your input button to go to that input.

The set you have should allow you to put labels on each input which is helpful.

If this information told you something you did not know, rate it as very helpful as I do this here for free.

SD TECH

Aug 17, 2010 | Mitsubishi WS-65815 65" Rear Projection...

1 Answer

I just purchased a Sherwood RD 6513 reciever, I'm trying to connect a hd cable box (motorola dch 3200), dvd player (sony dvp ns710h) and a rca hd tv (l32hd41). I connected hdmi cords from both components...


Hi! I will be more than glad to assist you. I f you are going to hook up your cable box - motorola to the sherwood receiver, connect an hdmi cable to the back of the motorola cable box, there is only 1 hdmi output there, then connect the other end to the sherwood receiver on the hdmi input, then connect another hdmi cable to the hdmi output and the other end goes to your rca hd tv.

for the sony dvp, you have only one hdmi out, connect an hdmi cable to the back of the sony dvp if u have another spare. connect it to the hdmi input of the sherwood receiver. there is only 1 hdmi output at the sherwood, so u need to use a component cable to be connected at the back of the sherwood receiver component output then the other end goes to the component input of the hd tv.

if you dont have anymore hdmi cable to hook up your sony dvp, u can use component cable, the connection will goes like this, connect a component cable on the output of the sony dvp and the other end goes to the sherwood component input then connect another component cable to the component output of the sherwood and the other end goes to the rca hd tv on the component input.

I hope this will solve your concern, if you have any question, u can get in touch..

Aug 21, 2009 | Projection Televisions

1 Answer

Connecting hd cable box to philips 60 rear projection


So, You have Five cable leads, The rgb get plugged into there corresponding colors and the other two are your Red and White Audio Input ------Correct? You do not use the in4, that is for a pc with horiz and vert sync. You use input 1 rgb and plug the red and white into the audio input.....your done!

Jun 06, 2009 | Philips 60PW9363 60" Rear Projection...

1 Answer

We have sound but no picture i have sound but no picture. when you change inputs the word input is doubled up and distorted


There were not much info in the manual but it did suggest trying this.
1st- Unplug for a few minutes and then plug it back in. Or use the reset button look it up in the manual. MANUAL

2nd- Blank screen troubleshooting

• If you're trying to watch TV, change channels or press the ANTENNA button to switch tuners.
• If you're trying to watch something that's playing on a component connected to the TV (like a DVD or a VCR tape), press the TV
button on the remote, then press INPUT until you get to the correct video input channel.
• If you're trying to watch a component (like your DVD player or VCR), make sure the component connected to the TV is turned on.
• If you're trying to watch a component (like your DVD player or VCR), make sure the component is connected correctly.

Post back if non of these ideas work and explain if there are any lights flashing or changing colors on the front where the green light usually is. A fixya rating would be appreciated, thank you for stopping by Fixya!

Feb 16, 2009 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

RCA D52130 52 in. Won't Display High Def


Hi!
I doubt you'll look at this 2 years later, or even have the T.V.

I have the same TV and was able to view ps3 and xbox 360 games in 1080i, but it's a little tricky. First, let me say that the ps3 is probably not the best system to try using 1080i in unless you have a 360 to help trick the tv into working.

Xbox 360
You need to first set the video to 1080i. This will make the screen display in a bunch of horizontal lines most of the time, but if you keep toggling it on and off, it eventually works. To avoid having to sit and swap between the two modes, it's easier to first set it to 1080i and confirm the setting, then go back into the settings, select 720 (first option above 1080i) and cancel as soon as the video mode changes. 95% of the time this will make it display correctly in 1080i mode. If you turn the tv off and back on, it will sometimes reset to the horizontal lines. If you restart the xbox, it will reset to horizontal lines most of the time. With the ps3, you can set it to 1080i and keep toggling it until it works, but when the game launches it can screw up again, so it's best to have the xbox on and ready with a component switch so you can fix it with the xbox then switch back to the ps3. I think the cable that comes with the tv for HD input (the component plugs don't work, they only support 480, but the vga looking input supports 1080i) - the cable is just poor quality and can barely handle the signal. I've been trying to find a better quality cable with no luck.


Hope this helps other people with this ancient beta HD input canadian tvness.

Dec 30, 2008 | RCA D52130 52" Rear Projection Television

1 Answer

Sound is just static


Don't understand why, perhaps rca contracted microsoft for their programming, but when I unplugged the TV and it rebooted, everything is fine. I still am concerned about the warning on the back.

Apr 20, 2008 | RCA P52930BL 52" Rear Projection...

1 Answer

Video input 4


If you changed PIP then you reversed your tuner, you need to flip back and is input 4 HD on this set? Or S-Video or just another component video? What is wrong with 3-1?

Sep 21, 2007 | Hitachi 61UWX10B 61" Rear Projection...

1 Answer

Component Video inputs do not work


I started back in the day of tubes. A family would have one set and it would be a 19" black and white. There are different resolutions now. The components probably do work, but, they don't pass the 480i signal. The satelite converter's analog signal needs to be set to 480p and the DVD needs to be set to progressive if it does have that setting. If the DVD is not a progressive scan DVD, then, the only inputs that it will show on is the analog signal. Some of the dish converters have a switch on the face for changing the resolution. If yours doesn't then put it in an analog source and go to the menu and change it there. Then move it to the component input. Hope this helps.

Jun 23, 2007 | Panasonic PT-53WX42 53" Rear Projection...

1 Answer

Blue screen


I would look for something real simple here. The problem appears to be in your component cables (I would suspect one being bad or connected to a wrong jack). If they are connected properly, try moving them a bit to see if the blue haze comes and goes or try different cables.

Dec 28, 2006 | Hitachi 43GX01B 43" Rear Projection...

Not finding what you are looking for?
Mitsubishi WS-65513 65" Rear Projection HDTV Logo

1,101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68368 Answers

Are you a Mitsubishi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...